RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial Wraith (http://www.rccrawler.com/forum/axial-wraith/)
-   -   A little help here please - problem solved :-) (http://www.rccrawler.com/forum/axial-wraith/489046-little-help-here-please-problem-solved.html)

Lambo1 03-26-2014 12:13 PM

A little help here please - problem solved :-)
 
1 Attachment(s)
I got the wraith kit mostly put together today. The front and rear wheels are turning in opposite directions. My guess is that one of the axles is backwards.

1. As viewed from the front, which direction should the spur gear turn for forward (cw or ccw?). Cw rotation results in the front going forward and back rotating in reverse.

Can any of you wraith experts spot the problem?

Thanks!!

Lambo1 03-26-2014 12:14 PM

Re: A little help here please
 
1 Attachment(s)
A pic of the rear

dna4engr 03-26-2014 12:23 PM

Re: A little help here please
 
I can't remember exactly but I think it's CW rotation is forward. Either way the ring gear needs to be opposite front to back, so yes you have one of them in wrong. No big whoop, that's the beauty of the wraith axles, easy to change those around. I could check when I get home tonight, but I'm sure someone else will answer before I do.

Dna

Lambo1 03-26-2014 12:31 PM

Re: A little help here please
 
DNA, I think you are exactly right. The instructions show the ring on the long side of the axle but upon closer inspection, the diagram at the top does show that the rear should be flipped so that the ring is on the short side.

Thanks again.

Lambo


All times are GMT -6. The time now is 06:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com