02-26-2015, 06:02 PM | #141 |
Pebble Pounder Join Date: Jul 2013 Location: Candler
Posts: 145
| Re: bilinvic's Wraith Rock Crawler
Looking good! I really like that wheel and tire combo. I may have to get a set of those wheels for the yeti. Just need to decide on tires since I have the u4's mounted on 6 bolts. Have you been able to test the dampening with that extra king shock? |
Sponsored Links | |
02-26-2015, 06:04 PM | #142 |
Quarry Creeper Join Date: May 2011 Location: scituate RI
Posts: 269
| Re: bilinvic's Wraith Rock Crawler
That ta sk looks killer. I just got word from DMG that he should be starting mine Monday now I just need a wraith to build lol.
|
02-26-2015, 06:13 PM | #143 |
I wanna be Dave Join Date: Sep 2012 Location: Victoria, BC
Posts: 2,257
| Re: bilinvic's Wraith Rock Crawler Thanxs. Soon it will be sporting the all black SSD wheels. The dampening is pretty much the same. The King shock is there's mostly for "the look". I did find that I had to put higher rate lower rear springs in because the blue springs were sagging too much for my liking. The Proline Power Stroke rear Slash shocks are very, very smooth.
|
02-26-2015, 06:15 PM | #144 |
I wanna be Dave Join Date: Sep 2012 Location: Victoria, BC
Posts: 2,257
| Re: bilinvic's Wraith Rock Crawler
I like this version of the shorty stiffy kit better than the original which was quite a bit shorter, which to me looked too "stumpy".
|
02-26-2015, 06:23 PM | #145 |
Quarry Creeper Join Date: May 2011 Location: scituate RI
Posts: 269
| Re: bilinvic's Wraith Rock Crawler I have him building me the stump back I was on the fence about that and the TA SK but I already bought the full vanquish link set. What width hubs are you using on the gearhead wheels.
|
02-26-2015, 06:30 PM | #146 |
I wanna be Dave Join Date: Sep 2012 Location: Victoria, BC
Posts: 2,257
| Re: bilinvic's Wraith Rock Crawler
As far as I know mine is stumpy too, just a longer stumpy than the original...I could be wrong! I'm using the hubs that came stock with the GH wheels, not sure of their measurement. I stretched the rear axle out a bit so now my wheelbase is 14.5".
|
02-26-2015, 06:34 PM | #147 |
Quarry Creeper Join Date: May 2011 Location: scituate RI
Posts: 269
| Re: bilinvic's Wraith Rock Crawler
Good to know on the GH wheels I have the same set up on my yeti I would just have to change out the rear hubs for the wraith.
|
02-27-2015, 01:09 AM | #148 |
Quarry Creeper Join Date: Sep 2014 Location: pacific northwest
Posts: 293
| Re: bilinvic's Wraith Rock Crawler
Are you changing the wheels out for looks or performance? I am considering those Gear Head wheels but worried they may be too heavy or too wide
|
02-27-2015, 08:57 AM | #149 |
I wanna be Dave Join Date: Sep 2012 Location: Victoria, BC
Posts: 2,257
| Re: bilinvic's Wraith Rock Crawler
Both actually. My rig is quite heavy so I would like to take away some of the rotating mass. I do however highly recommend the Gear Head wheels, I have a couple pairs of them and they are perfect.
|
03-04-2015, 06:27 PM | #150 |
I wanna be Dave Join Date: Sep 2012 Location: Victoria, BC
Posts: 2,257
| Re: bilinvic's Wraith Rock Crawler
I received my order from RPP...turns out the SSD beadlock rims won't work with the Sedona tires. The rims are too narrow for the tires. Not a big deal as I have a new set of Axial Rocksters in Black Chrome that work great and still keep the rotating mass minimized. The Sedona tires look awesome and are super sticky...can't wait to go and try them out on the rocks. I also received AMF Racing's aluminum half side panel set. I decided this Wraith was also worthy of Currie axles, so the VP aluminum axles were swapped out for the silver Curries. Other than the DMG front bumper that I am waiting to get built, the transformation is essentially complete....but as we all know, an RC Crawler is NEVER complete! Last edited by bilinvic; 07-05-2017 at 09:55 PM. |
03-04-2015, 06:55 PM | #151 |
Pebble Pounder Join Date: May 2013 Location: kinzers
Posts: 180
| Re: bilinvic's Wraith Rock Crawler
that is awesome got to be one of the nicest wraith ive seen on rccrawler (prob.#1) thanks for sharing
|
03-04-2015, 07:02 PM | #152 |
I wanna be Dave Join Date: Sep 2012 Location: Victoria, BC
Posts: 2,257
| Re: bilinvic's Wraith Rock Crawler
Thank you....there are many incredible Wraith builds on RCCrawler and those have been inspirational to me. I've had this Wraith around three years now and it just keeps getting better and better......and yes, I drive the hell out it.
|
03-04-2015, 07:30 PM | #153 |
Quarry Creeper Join Date: Sep 2014 Location: pacific northwest
Posts: 293
| Re: bilinvic's Wraith Rock Crawler
Looking awesome! Do you mostly crawl with it or what other type of playing do you use it for?
|
03-04-2015, 07:32 PM | #154 |
Pebble Pounder Join Date: Jul 2013 Location: Candler
Posts: 145
| Re: bilinvic's Wraith Rock Crawler
You'll love the performance of those tires. Had them on my first wraith, they worked in every situation. Only reason I removed them was to install a more scale looking tire. You keep improving the appearance of the wraith.
|
03-04-2015, 07:45 PM | #155 |
I wanna be Dave Join Date: Sep 2012 Location: Victoria, BC
Posts: 2,257
| Re: bilinvic's Wraith Rock Crawler
I built this Wraith for crawling....I don't bash with it at all....I have my Slash for that!
|
03-04-2015, 11:21 PM | #156 |
Quarry Creeper Join Date: Dec 2010 Location: Anaheim
Posts: 346
| Re: bilinvic's Wraith Rock Crawler
Dude that thing is ****in stupid sick. So clean Straight badass |
03-04-2015, 11:52 PM | #157 |
I wanna be Dave Join Date: Sep 2012 Location: Victoria, BC
Posts: 2,257
| Re: bilinvic's Wraith Rock Crawler Last edited by bilinvic; 07-05-2017 at 09:57 PM. |
03-05-2015, 07:43 PM | #158 |
Quarry Creeper Join Date: May 2011 Location: scituate RI
Posts: 269
| Re: bilinvic's Wraith Rock Crawler
That is a sick wraith. What did you use for the hood pins
|
03-05-2015, 09:31 PM | #159 |
I wanna be Dave Join Date: Sep 2012 Location: Victoria, BC
Posts: 2,257
| Re: bilinvic's Wraith Rock Crawler
Thanxs. The hood pins are two pairs of Traxxas Battery Hold Down Kits (3727). I'm sure hoping I can get out this weekend for a crawl with this new set-up.
|
03-08-2015, 06:32 AM | #160 |
Pebble Pounder Join Date: Jul 2013 Location: Candler
Posts: 145
| Re: bilinvic's Wraith Rock Crawler
Well did you make it out this weekend? Interested to see how the shake down run went.
|
bilinvic's Wraith Rock Crawler - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Crawler - Wraith x R1 G-Made x Rock Force | matoso | Newbie General | 10 | 01-07-2013 04:00 PM |
Rocka´s Wraith Rock Crawler | Rockatanski | Axial Wraith | 14 | 06-10-2012 01:39 PM |
| |