|
| LinkBack | Thread Tools | Display Modes |
08-06-2014, 07:49 PM | #1 |
Rock Crawler Join Date: Feb 2012 Location: Wisconsin
Posts: 636
| eye to eye measurement of stock Wraith links?
Ok - I've been searching for the stock link length (eye to eye) of the Wraith but I can't find it. Can anyone provide me with the stock upper/lower link length for a Wraith? Thanks!
|
Sponsored Links | |
08-06-2014, 08:43 PM | #2 |
Pebble Pounder Join Date: Apr 2014 Location: Nevada
Posts: 106
| Re: eye to eye measurement of stock Wraith links?
I have a poision spyder here on the bench and without taking it apart lowers and uppers are close they are 126 mm center to center or 5 in Sent from my Moto X using Tapatalk |
08-06-2014, 09:39 PM | #3 |
Rock Stacker Join Date: Aug 2007 Location: Ventura, Ca.
Posts: 92
| Re: eye to eye measurement of stock Wraith links?
I have a new set of VP links sitting here and they measure 4-7/8 upper and 5-1/8 lower
|
08-06-2014, 09:49 PM | #4 |
Rock Crawler Join Date: Aug 2011 Location: south shore Ma
Posts: 803
| Re: eye to eye measurement of stock Wraith links?
^ I use those numbers as well. Sometimes I go just 5 on the lowers for a better pinion angle tho
|
08-06-2014, 10:17 PM | #5 |
Pebble Pounder Join Date: Apr 2014 Location: Trinidad
Posts: 103
| Re: eye to eye measurement of stock Wraith links?
I have a set of Crawler Innovations high clearance links, from their Wraith kit, will post up the measurements later when I get home. If I remember correctly, they were all 4.8" in length..
|
08-07-2014, 12:07 AM | #6 |
Pebble Pounder Join Date: Apr 2014 Location: Nevada
Posts: 106
| Re: eye to eye measurement of stock Wraith links? |
08-07-2014, 12:34 AM | #7 |
Pebble Pounder Join Date: Apr 2014 Location: Nevada
Posts: 106
| Re: eye to eye measurement of stock Wraith links? |
08-07-2014, 08:19 AM | #8 |
Pebble Pounder Join Date: Apr 2014 Location: Trinidad
Posts: 103
| Re: eye to eye measurement of stock Wraith links?
CapnSwagga, could you confirm the readings you got? Am I seeing 5.0 lower by 4.8 upper? I'm getting 5.04in on my Stock lower links. Did not measure uppers as they are still installed. Both upper and lower CI Wraith links measure out at 4.88" center to center, but that's with the Traxxas Revo ends screwed all the way in. Backing out one full turn from each revo end will extend the link to 4.96" Last edited by 3stage; 08-07-2014 at 08:28 AM. |
08-07-2014, 10:14 AM | #9 |
Pebble Pounder Join Date: Apr 2014 Location: Nevada
Posts: 106
| Re: eye to eye measurement of stock Wraith links?
That's why I took pics. People started throwing out random numbers. 126mm or five on the lowers and my exact measure on the uppers was 122 or 4.8 yes Sent from my Moto X using Tapatalk |
eye to eye measurement of stock Wraith links? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
strait one piece tie rod length? (eye to eye) | Trugg | Axial XR10 | 12 | 11-23-2010 01:57 PM |
Eye to Eye Measurement??? | Vu14TJ | Tamiya Txt-1 and Juggernaut | 5 | 01-03-2006 01:33 PM |
Thread Tools | |
Display Modes | |
| |