carter fab inner fender with battery mod and lowering kit?
 

I was wondering if the carter fab fenders wold work on a wraith with the battery upfront and a lowering kit installed? I bought the rc4wd inner fenders and started cutting away... after realizing how much i was going to have to cut away I just threw them in the trash?

any input?

Re: carter fab inner fender with battery mod and lowering kit?
 

Yes, Clay designed them to fit up to a 3S 5000MaH Lipo up front. For the Lowering kit, just drill the holes to mount it over the aluminum. They will work fine.

Re: carter fab inner fender with battery mod and lowering kit?
 

swwweeeet thanks

Re: carter fab inner fender with battery mod and lowering kit?
 

yep i have that set up in my Wraith and just trim to fit as needed. the biggest thing is take your time fitting everything

Re: carter fab inner fender with battery mod and lowering kit?
 

I have a question for ya, what is the use of the lowering kit? I get it use long shocks and move the top mount higher. But I've run in droop and sprung and have out wheeled rigs that have the lowering kit. I guess it's personal preference.

Re: carter fab inner fender with battery mod and lowering kit?
 

the reason i lower the truck is to lower the center of gravity when climbing up a surface. my shocks are stock and i have never even cracked them open. it really seem to help

Re: carter fab inner fender with battery mod and lowering kit?
 

<a href="http://s71.photobucket.com/user/bantam53/media/Mobile%20Uploads/Wraith/1013141748.jpg.html" target="_blank"><img src="http://i71.photobucket.com/albums/i123/bantam53/Mobile%20Uploads/Wraith/1013141748.jpg" border="0" alt=" photo 1013141748.jpg"/></a>
crawler inovation plate with carter fab inner fenders. Was programing the ESC in this pic.