STRC 4 link plate...1.9 wraith
 

Anybody have any input about this servo mount? When I attach the servo it partially covers up the holes for mounting links. Am I missing something?

http://tapatalk.imageshack.com/v2/14...7f98779c83.jpg
http://tapatalk.imageshack.com/v2/14...b4cbf7c69f.jpg
http://tapatalk.imageshack.com/v2/14...a502567742.jpg


Sent from my iPhone using Tapatalk

Re: STRC 4 link plate...1.9 wraith
 

that's stupid .. hope you figure it out and let us know what you find out

Re: STRC 4 link plate...1.9 wraith
 

Only thing I can do is drill out two holes closer to the front of the plate for the servo mounts. I don't want to do that until I hear some feedback though.


Sent from my iPhone using Tapatalk

Re: STRC 4 link plate...1.9 wraith
 

why not just use longer screws and add spacers between the servo tabs and the mounts, that will move the servo away from the holes so you can mount the links

Re: STRC 4 link plate...1.9 wraith
 

Designed around using a standard sized 1.5" tall servo I guess, that Savox is at least 0.25" taller than say a Hitec 7950
http://www.teamstrc.com/image/data/S...77_resizes.JPG

You could counter sink the 2 holes you want to use, the same as the 3 mounting holes have been done.

Re: STRC 4 link plate...1.9 wraith
 

I thought of this too while I was messing around with it. I'll likely try this first.



Thats a good idea too. Only problem I see with that is anytime I need to remove the links, I'll have to remove the servo as well. Not a big deal, but could be a pain.

Re: STRC 4 link plate...1.9 wraith
 

I ended up drilling two holes right in front of the others. Works perfect.


Sent from my iPhone using Tapatalk