hubs.... OK I've searched and read but no real direct answer to my question. I did the VP stage 1 and have the usual rub on the wheel. I've only had traxxas trucks before this that had the hex hubs. Can I solve the issue with just buying a set of the VP hex hubs or do I need more to do the conversion on my wraith spawn. Or do I need to get something else as described in other post? |
Re: hubs.... You'll need a set of 12mm hexes and some VP hubs (plus a set of hub screws since they are 4-40 not 3mm). I suggest the 475 hubs from VP. |
Re: hubs.... Thanks trying to track down hub screws. Only place is Hong Kong lol. |
Re: hubs.... |
Re: hubs.... Quote:
Locked Up RC has hubs & 4/40 bolts you need, in stock. Patrick is great to deal with. |
Re: hubs.... Quote:
|
Re: hubs.... I suggest 350 and no wider. Could also possibly get it to clear with just thicker hexes. Wider isn't better but I guess looks cooler. How wide are the stock hubs? Can you clearance the rodds end slightly to clearance the wheel. Is it close enough to self clearance? |
All times are GMT -6. The time now is 02:10 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com