|
![]() |
| LinkBack | Thread Tools | Display Modes |
![]() | #1 |
Rock Crawler Join Date: Apr 2011 Location: British Columbia
Posts: 525
| ![]()
Why is there no dedicated tips and tricks thread for wraiths like the one in the scx10 section, we all know things like the fast back/cage mods, hinged hood and etc..but I'm curious to see what else guys have come up with for little tricks
|
![]() | ![]() |
Sponsored Links | |
![]() | #2 |
Rock Stacker Join Date: Apr 2014 Location: Altoona,Florida
Posts: 73
| ![]()
Flip shock/link mounts so they point down Ren |
![]() | ![]() |
![]() | #3 |
RCC Addict Join Date: Feb 2012 Location: UK
Posts: 1,015
| ![]()
Create the thread. See if it takes off. ![]() |
![]() | ![]() |
![]() | #4 |
Rock Crawler Join Date: Apr 2011 Location: British Columbia
Posts: 525
| ![]()
So let's here it folks, what kind of tricks have you found? I just flipped my link mounts on the axles to get it down just a little bit and I have seen where some guys have flipped the upper rear shock mounts up to get it a little lower also
|
![]() | ![]() |
![]() | #5 |
Newbie Join Date: Feb 2015 Location: Vista
Posts: 2
| ![]()
I recently removed factory cage and havent looked back,installed any 2.2 cage,installed factory dig kit offered by Axial , our wraiths are super class comp. crawlers, two sweet rides in one, after installing quick. Disconnect leaders coming out of receiver box,it only takes eight side screws,four shock screws and ten minutes to change over, with staggered axle 3 rd members, its a better comp.car...and tho its a shafty, buy xr 10 axles and mod,irs still cheap . And less time consuming than building a box stock xr10, which I run a bully. ..nuff said
Last edited by no locked hubs; 02-21-2015 at 10:09 PM. |
![]() | ![]() |
![]() | #6 |
Newbie Join Date: Feb 2015 Location: Vista
Posts: 2
| ![]()
Take any scx10, using wraith plastic sides,i made duplicates in tin,laid plastic on tin traced,cur out w snips,remove scx10 shock mountshold up tin sides,ruff out holes,drill.screwin ffront first..eyeball,mark ,drill rear..duplicate othee side...you just made narrow chassis rat rod body,remove body pins.stow electonics,build flat fenders up front, b creative closing in...will post pics.once I figure it out,help! Also this mod allows you to use scx as a comp crawler, like a g.made or run scale body and cleans uo undercArraige And antiques OR gives u sticker wall .my favorite is light mounting points... Last edited by no locked hubs; 02-21-2015 at 10:39 PM. |
![]() | ![]() |
![]() | #7 |
Rock Crawler Join Date: Apr 2011 Location: British Columbia
Posts: 525
| ![]()
I have stock glued Ripsaws on my wraith and I decided to cut every other lug on these stock glued wheels and tires to see what the difference is
|
![]() | ![]() |
![]() | #8 |
Rock Crawler Join Date: Feb 2011 Location: Spur, TX
Posts: 541
| ![]()
Want to know what the next weak point on your Wraith is to upgrade? Hand the control to any child 12 and under and walk away. You'll find out within 30 min.. ![]() Useful tip: As Dr. Newb mentioned above, you can cut lugs off tires to help them clear out debree better and to grab the rocks. Various ways to do it too. As an example, my R35 compound Ripsaws: ![]() |
![]() | ![]() |
![]() |
![]() | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TF2 tips and tricks thread | 1BadJeepBruiser | RC4WD Trail Finder 2 | 109 | 03-29-2023 01:10 PM |
Official RS10 tips and tricks thread. | jsowens | Redcat Crawlers | 214 | 02-07-2020 08:01 PM |
Tips and Tricks Thread | Lemonlegs28 | Axial SCX-10 | 375 | 01-20-2019 10:52 AM |
Sc tips and tricks thread | cmyers1 | South Carolina | 2 | 11-24-2011 02:56 PM |
Thread Tools | |
Display Modes | |
| |