Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial Wraith
Loading

Notices

Thread: Wraith Setup

Reply
 
LinkBack Thread Tools Display Modes
Old 03-08-2015, 12:40 PM   #1
Newbie
 
Join Date: Jan 2014
Location: British Columbia, Canada
Posts: 16
Default Wraith Setup

Hello.

This Will Be My Second Rc.

I Am Aiming More For Speed Then Crawling

Wraith Kit
Traxxas VXL Motor+ESC
Axial Wraith Read Sway Bar
Open Front Diff
Fast Eddy Bearings. Wraith Bearing Kit+Screw Kit
MIP Ax-10 Driveshafts
20c 2S 5000MAH Venom Lipo
Upgrade As I Break Stuff

And I Already Have This List From My Ax-10:
HiTec Hs-7954
Gens Ace 1600Mah 20C 2S
Traxxas Rx/Tx
Lipo Charger
2 Axial 27t Motors(Fried ESC's)

I Appreciate Your Feedback Also Looking for gearing options??
Thanks!
Axial Junky is offline   Reply With Quote
Sponsored Links
Old 03-08-2015, 12:45 PM   #2
MODERATOR™
 
EeePee's Avatar
 
Join Date: Jul 2004
Location: Ohio
Posts: 18,928
Default Re: Wraith Setup

Is This A Good Setup?

One is enough.
EeePee is offline   Reply With Quote
Old 03-08-2015, 12:58 PM   #3
Quarry Creeper
 
Join Date: Jun 2013
Location: South jersey
Posts: 265
Default Re: Wraith Setup

if you plan on doing even a little bit of crawling, i would recommend a sensored brushless motor, i run a hobbywing 3400kv 3656sd. the vxl esc has a sensor port and is already water proof so that should work good for your application. i would also recommend a bigger battery. 1600mah 2s isn't good for speed or run time. pickup a 2200mah 3s. it will give you more speed and run time, and can be had for not much $$. make sure you have a BEC. as far as beefing up for the extra power, replace things as they break.
Cmarcan167 is offline   Reply With Quote
Old 03-08-2015, 12:59 PM   #4
Newbie
 
Join Date: Jan 2014
Location: British Columbia, Canada
Posts: 16
Default Re: Wraith Setup

Quote:
Originally Posted by Cmarcan167 View Post
if you plan on doing even a little bit of crawling, i would recommend a sensored brushless motor, i run a hobbywing 3400kv 3656sd. the vxl esc has a sensor port and is already water proof so that should work good for your application. i would also recommend a bigger battery. 1600mah 2s isn't good for speed or run time. pickup a 2200mah 3s. it will give you more speed and run time, and can be had for not much $$. make sure you have a BEC. as far as beefing up for the extra power, replace things as they break.
Thanks. But That is just what i had from my crawler i plan on getting a 5000mah. would that be good?
Axial Junky is offline   Reply With Quote
Old 03-08-2015, 01:07 PM   #5
Quarry Creeper
 
Join Date: Jun 2013
Location: South jersey
Posts: 265
Default Re: Wraith Setup

i run a 5000mah 3s and i have great speed and get about 3hrs of run time. i do a mix of slow crawling and high speed runs. im also running an rx8 ESC. the vxl-3s is much less hungry, so you may get longer run time.
Cmarcan167 is offline   Reply With Quote
Old 03-08-2015, 02:36 PM   #6
Quarry Creeper
 
Join Date: Jun 2013
Location: South jersey
Posts: 265
Default Re: Wraith Setup

castle link
Cmarcan167 is offline   Reply With Quote
Old 03-08-2015, 08:36 PM   #7
Rock Crawler
 
Join Date: Feb 2011
Location: Spur, TX
Posts: 541
Default Re: Wraith Setup

Considering this is the Wraith section.. I vote Wraith!

For what you're aiming for, the Yeti might be the better choice. Will have to get some opinions from people who have both to make an educated decision tho.
Sevastra is offline   Reply With Quote
Old 03-08-2015, 08:51 PM   #8
Rock Crawler
 
Join Date: Feb 2011
Location: Spur, TX
Posts: 541
Default Re: Wraith Setup

Could do a wreti. Search the forums for a Wrexo (Wraith caged, AR60 solid rear axle with independent front suspension from the Exo). That'll give you an excellent idea of what a Wraith & yeti combo can do.
Sevastra is offline   Reply With Quote
Old 03-08-2015, 09:10 PM   #9
Newbie
 
Join Date: Jan 2014
Location: British Columbia, Canada
Posts: 16
Default

Thanks Cmarcan i would be getting 5000mah 2s. thanks for all the help How Do I Program Castle BEC?
I Am Thinking About Getting The Yeti Now As I Was Looking At Prices And Yeti Kit Is 329.99$ VS 309.99$ Wraith Kit... Hmm Opinions?

I Have been reading lots (Since 2013) so i have a good idea of what i want and what my wallet wants to do Which Is Easier To Build?(Kit Version)

Last edited by THX_138; 06-14-2016 at 01:22 AM.
Axial Junky is offline   Reply With Quote
Reply

Tags
first forum noob here!!!



Wraith Setup - Similar Threads
Thread Thread Starter Forum Replies Last Post
New Wraith setup questions extremeshannon Axial Wraith 10 01-11-2015 02:08 AM
got my basher wraith setup kgb424 Axial Wraith 0 11-14-2013 10:32 PM
Help with Wraith setup Falcon-7 Tires and Wheels 4 06-21-2012 02:37 PM
wraith setup question? Bananaclip Axial Wraith 3 12-14-2011 09:55 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:38 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com