Crawler02's wraith kit with currie axles
 

I've had my kit for some time now and just finally got it going with a few upgrades I've been needing/wanting for a while now. Here's my parts list so far,
Vp currie front axle
Vp currie centered rear axle
Vp scale knuckles/chubs
Vp 10pc titanium links
Vp 475 slws
Vp cms and panhard mount
Hot racing spool (rear)
Lockeduprc F.I spool (front)
Axial hd gears stock ratio both axles
Lockedup rc mini locos bushings instead of bearings for pinions
Proline slash powerstrokes (fronts up front an rears on rear)
Crawler innovations 6 bolt rims 1" wide
Gearhead droop mounts on rear only
Exo/yeti radiator in back :mrgreen:
Supershafty beefy topshaft
Robinson racing slash steel spur/slipper 56t 32p
Robinson racing pinion 14t 32p
Castle MMP
Castle bec @7.4v
Tekin roc412 3100kv
Savox sa1231sg
Axial 25t servo horn
http://i177.photobucket.com/albums/w...pshepvqdun.jpg
http://i177.photobucket.com/albums/w...psoa7tgldr.jpg
http://i177.photobucket.com/albums/w...ps30ja8ate.jpg
http://i177.photobucket.com/albums/w...psfnv14ztz.jpg

Re: Crawler02's wraith kit with currie axles
 

Sick. Rockin no roof? Got any better side pics? I dig the decal placement.

Re: Crawler02's wraith kit with currie axles
 

Yep she stays topless"thumbsup" here's a few shots of the panels.

http://i177.photobucket.com/albums/w...ps5sn1sqhc.jpg
http://i177.photobucket.com/albums/w...psaqqybwwo.jpg
http://i177.photobucket.com/albums/w...pszqcqrw3n.jpg

Re: Crawler02's wraith kit with currie axles
 

Well I've got the vp vvd's on the way to see if this beast wants to ad them to its diet of parts it spits out! In the meantime I went ahead and did my version of the wraith fastback mod and took a piece of the back roof section and was able to ad it in as a windshield spreader bar because I've broken the cage once already in that area. Let me know what you guys think! I'm going to put the roof panel back on now after I trim it to fit and I'd like to sleeve the pieces of all thread I used for the back of the cage with some brake line.

http://i177.photobucket.com/albums/w...psznnshn05.jpg
http://i177.photobucket.com/albums/w...psaxvub1ws.jpg

Re: Crawler02's wraith kit with currie axles
 

Looking good. "thumbsup"

Re: Crawler02's wraith kit with currie axles
 

Got the vanquish vvd's installed and they've been holding up great so far"thumbsup"
http://i177.photobucket.com/albums/w...psburrgupc.jpg
http://i177.photobucket.com/albums/w...psntbzwtab.jpg

Re: Crawler02's wraith kit with currie axles
 

...been toying with the idea of the /\ windshield piece leftover from the fastback mod... You executed it nicely! Could you pass on some advice for how to securely attach it (especially the top of the /\ to the upper windshield bar). Or a close up pic of attachment points? ...much appreciated!

Re: Crawler02's wraith kit with currie axles
 

Really looks aggressive done up like that. I like it "thumbsup"

Re: Crawler02's wraith kit with currie axles
 

I attached it by drilling two holes so I could get screws into the hood side of the /\ piece and then used a small pin with some ca glue for the top so I didn't have to screw down into it. I was suprized how well it's held up so far I jumped this thing full speed roof first into a tree yesterday an the only carnage was a broken gearhead shock mount on the rear.
Thank you sir

Re: Crawler02's wraith kit with currie axles
 

Thanks! ...my mind was thinking along the same lines,albeit much slower!... your ride rocks!

Re: Crawler02's wraith kit with currie axles
 

Well I kept breaking the gearhead droop mounts I was using in the rear so I got rid of them completely and swapped the slash rears onto the front an the fronts to the rear. Much better setup imo with the vp cms/ph and other than that been beating on this thing daily with no problems yet "thumbsup"http://i177.photobucket.com/albums/w...pshhxoiodl.jpg
http://i177.photobucket.com/albums/w...psufsvyvam.jpg
http://i177.photobucket.com/albums/w...ps2wxesyrd.jpg
http://i177.photobucket.com/albums/w...pswkzuoi3t.jpg

Re: Crawler02's wraith kit with currie axles
 

Took this thing out again today and found myself a new crawl spot that's awesome for this thing! I've been having way more fun with this lately than I ever have with rc's. I'm excited to keep running the crap outta this beast and see how everything holds up to the abuse"thumbsup"
http://i177.photobucket.com/albums/w...psat27pdnb.jpg
http://i177.photobucket.com/albums/w...psuwvnjujl.jpg

Re: Crawler02's wraith kit with currie axles
 

Doing a bit of a tear down today to check everything over and load the diffs and tranny with some fresh grease so grabbed a picture of this thing not so together


http://i177.photobucket.com/albums/w...pssjr1thb0.jpg