|
| LinkBack | Thread Tools | Display Modes |
05-09-2015, 03:07 PM | #1 |
Quarry Creeper Join Date: Mar 2014 Location: san antonio
Posts: 492
| Ae-5with castle BEC help
Need some help with this. I'm trying to run a castle BEC on my wraith. I've installed it according to castles instructions but no dice. When I power in my esc (ae-5) it beeps twice and then flashes red. I unplugged the BEC and plugged the red wire back in to my receiver and it works just fine. Anyone have experience with the ae-5 and a BEC? What am I doing wrong? Sent from my iPhone using Tapatalk |
Sponsored Links | |
05-10-2015, 12:57 PM | #2 |
Newbie Join Date: Feb 2012 Location: Ramona, Kali.
Posts: 35
| Re: Ae-5with castle BEC help
What's your battery voltage and what do you have the BECs output set to?
|
05-10-2015, 01:33 PM | #3 |
Pebble Pounder Join Date: Oct 2004 Location: Indianapolis
Posts: 182
| Re: Ae-5with castle BEC help
I run a CC BEC's on two AE5's using a Holmes Hobbies harness. It is just plug and play with no other wires to remove.
|
05-10-2015, 02:12 PM | #4 |
Newbie Join Date: Feb 2012 Location: Ramona, Kali.
Posts: 35
| Re: Ae-5with castle BEC help
I never could figure out the advantage of connecting the BEC according to the diagram that comes with the unit. The Holmes patch cable has it right and that's how I connected mine (although I hardwired it to eliminate all the connectors), This comment is especially poignant..." and shares a dual ground path to both RX and external BEC to prevent floating ground issues."... which is the preferred method I think as I've seen several other schematics that don't have the common ground between the BEC/Servo/receiver.
Last edited by Cammmo; 05-10-2015 at 02:14 PM. |
05-10-2015, 02:32 PM | #5 |
Pebble Pounder Join Date: Feb 2015 Location: Carson Valley
Posts: 137
| Re: Ae-5with castle BEC help
I hooked up a 10a CC BEC the way the package says to and it works fine with my AE5. Maybe you have the receiver plug flipped backwards???
|
05-10-2015, 07:07 PM | #6 |
Quarry Creeper Join Date: Mar 2014 Location: san antonio
Posts: 492
| Re: Ae-5with castle BEC help
I found the issue. I used a 3" extension since my receiver is in the back of my rig and it wasn't making proper contact. One of the pins was pushed out. Snugged it up and now it runs perfect. Thanks for the tips though guys! Appreciate all the suggestions and advice. Sent from my iPhone using Tapatalk |
Ae-5with castle BEC help - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
BRXL+Castle Link+Bec=? How do i set BEC? | crazyorigin | Electronics | 17 | 11-21-2011 03:11 PM |
Castle BEC & Castle Link - not finding BEC | Locked Up | Electronics | 22 | 12-20-2007 03:37 PM |
Thread Tools | |
Display Modes | |
| |