Tie rod & Drag Link Can anyone please take a measurement of a Vp tie rod and drag link? need to know length from eye hole to eye hole. thanks for any help. In mm or inches |
Re: Tie rod & Drag Link Quote:
I posted photos in my other thread. |
Re: Tie rod & Drag Link This is the STRC kit. I had to shim it a bit to get the correct length. I used some left over Axial rod ends but the Traxxas Revo rod ends will be a better option should you chose to tap a solid piece of rod rather than drill and thread it. Keep in mind you will need to add a little length to the rod to account for any bends you will be making in it. I don't think a straight piece will work for the tie rod without having clearance issues near the pumpkin. You should be able to get away with a straight drag link though, but I may be wrong. http://images.tapatalk-cdn.com/15/05...a49c7907f1.jpg http://images.tapatalk-cdn.com/15/05...6d35d64200.jpg Sent from The Pit. |
Re: Tie rod & Drag Link Ya I have that one and want to throw it away. |
Re: Tie rod & Drag Link Quote:
i'll take it off your hands if you're just going to throw it away. |
Re: Tie rod & Drag Link see your other post, measurements in there but not eye to eye, just the metal ling lengths. |
All times are GMT -6. The time now is 08:06 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com