|
| LinkBack | Thread Tools | Display Modes |
06-13-2015, 04:04 PM | #1 |
Rock Stacker Join Date: May 2015 Location: Ithaca, MI
Posts: 66
| need hex's! don't know what??
Just bought a axial p.s. wraith and did not know it didn't come with hex's on the shafts. Does the axial aluminum hex hub 12 mm work for the axial rocksters?? Just bought some of them and tsl's. I am new to all of this so please don't beat me up. Lo . Is a 12 mm all the same isn't it??
|
Sponsored Links | |
06-13-2015, 04:09 PM | #2 |
I wanna be Dave Join Date: May 2015 Location: Moving
Posts: 2,580
| Re: need hex's! don't know what??
Yes, you need 12mm
|
06-13-2015, 04:34 PM | #3 |
I joined the Band! Join Date: Dec 2014 Location: Earth
Posts: 1,188
| Re: need hex's! don't know what??
There are two 12mm Axial hex adapters, one for the Wraith and one for the SCX10. They are not the same. You'll need the Wraith hex (#AX30429) for the 2.2 Rockster wheels. http://www.axialracing.com/products/ax30429 Last edited by Eric0424; 06-13-2015 at 06:39 PM. |
06-13-2015, 06:27 PM | #4 |
Newbie Join Date: Jul 2014 Location: Angleterre
Posts: 29
| Re: need hex's! don't know what??
The get ax31266 hex converters for your trail ready beadlocks and off you go! These were originally for the yetis which were striping out pin drives but solves the same problem on the ps wraiths. |
06-13-2015, 07:34 PM | #5 | |
Quarry Creeper Join Date: Apr 2014 Location: a land bereft of rocks
Posts: 366
| Re: need hex's! don't know what?? Quote:
Go back and read the original post he already bought different wheels and needed hex adapters. | |
06-13-2015, 09:27 PM | #6 |
Rock Stacker Join Date: May 2015 Location: Ithaca, MI
Posts: 66
| Re: need hex's! don't know what??
Thanks guy's really love this site. I go to the lhs and they kind of treat me like a dumbass I have been wrenching my whole life just not on this stuff. But I do like doing it.
|
06-13-2015, 10:27 PM | #7 |
Newbie Join Date: May 2015 Location: Goodyear
Posts: 31
| Re: need hex's! don't know what?? My lhs does the samething. I work on cars for a living so I'm sure I could figure stuff out. Just because I'm new to the wraith don't treat me like I'm dumb. Teach me and I will spend more money ya know. I only go to the lhs to get stuff in a rush. Anything else I just order online, usually cheaper online anyway.
|
06-14-2015, 11:32 AM | #8 |
Rock Stacker Join Date: May 2015 Location: Ithaca, MI
Posts: 66
| Re: need hex's! don't know what??
Yup exactly. I order everything online anymore quad parts, jeep parts, and now rc parts. I go there just to look nowadays.
|
06-14-2015, 12:26 PM | #9 |
I wanna be Dave Join Date: May 2015 Location: Moving
Posts: 2,580
| Re: need hex's! don't know what??
I'm lucky enough to have a LHS with great people but they have very little in stock for my wraith or crawlers in general. It'd be nice to have both. Thank god for this forum too. Everyone here is great. I've been on some forums where everyone is a total jackass and help is impossible to get.
|
06-15-2015, 01:08 AM | #10 | |
Newbie Join Date: Jul 2014 Location: Angleterre
Posts: 29
| Re: need hex's! don't know what?? Quote:
As for the LHS issue I've had the same experience, absolutely unhelpful and unwelcoming. I'm not expecting the red carpet treatment but at least a smile and a hello. I'm also pretty new to RC as have been using online only since I got interested. A couple months back I discovered there was a shop local to me and thought I'd try and support them. Turns out I was wasting my time. They cost a little less than online (surprising) but stuff which I could get next day online took over a week to get to the LHS. Coupled with a bad attitude I don't think I'll be going back. | |
need hex's! don't know what?? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wheel Hex's | torquejunkie | Losi Mini-Rock Crawler | 4 | 03-31-2010 01:15 PM |
Wider Hex's | rchippie | Tires and Wheels | 6 | 04-28-2009 09:17 PM |
hex's | theshimonator | Tires and Wheels | 1 | 07-03-2007 02:59 PM |
Hex's | CoreyK | General Crawlers | 8 | 07-17-2006 07:58 PM |
2.2 hex's | gobble_doc | Tamiya TLT Crawlers | 2 | 02-14-2005 02:38 AM |
| |