Wraith spawn kit for slow crawling advice Still trying to decide between the Spawn kit or G6 kit to build next. Both can be made into a pretty nice scale build. I see the Spawn kit now has some upgraded parts so what would I need to upgrade for a slow crawler build? Looking to run a 55 or 65 turn based on suggestions and gearing. Steering servo size and what size 2s lipo will fit up front.. Thanks again D |
Re: Wraith spawn kit for slow crawling advice Do u plan on making it a strict crawler? |
Re: Wraith spawn kit for slow crawling advice I would run at least a 35t paired with a quality ESC.Should be able fit a 4400-5000 mAh 2s pack up front no problem. |
Re: Wraith spawn kit for slow crawling advice I run a Novak 21.5t on 2s, no cheating with wheel speed allowed! As for a servo you can't go wrong with hitec, I run a 7955 and would reccomend one with more torque. I'm going to step to the 7980, but most are satisfied with a 7950. |
Re: Wraith spawn kit for slow crawling advice I started with a 35T Holmes Torque Master Pro with lower pinion and spur gears. I still use the Hi-Tech 7950. This was an awesome setup with super slow crawling abilities. |
Re: Wraith spawn kit for slow crawling advice Thanks guys. Planning on a strict crawler. Need to finish the G6 first but I'm collecting parts for the Wraith. D |
All times are GMT -6. The time now is 06:51 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com