09-04-2015, 02:08 AM | #1 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| 1.9 Wraith-TJ build
Started a 1.9 Wraith build with the spar-parts i had laying around... Some of the ingredients: AX10 tranny with VP Hurtz dig Trackstar 13.5 sensored brushless motor AX10 Axles stock gearing, front with narrow XR10 steering mod. Turnigy 959 alloy servo on axle Castle MMP Turnigy BEC 6V 3-5A AX10 Shocks semi-droop? Proline TSL XL on axial 8-hole with custom beadlock rings HPI TJ lexan body Made a new bracket to suport a mini-servo for the dig: Last edited by tomster; 09-04-2015 at 02:11 AM. |
Sponsored Links | |
09-04-2015, 05:41 AM | #2 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
The body is biggest work... But i really like how this looks! i mounted the rearend with some links i had laying around, but the are too long, i will move the axle a few mm forward. Shock options is the next problem. i have 4 brandnew Proline powerstroke SCX 90mm shocks but the seem to be too short.... in the pics i tried AX10 shox half droop they seem to be right in length but not scale... |
09-05-2015, 01:31 AM | #3 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
Almost a roller! I went back to the proline 90mm shocks and like the ride hight. But i dont think thi is the final setup... might try some 100mm shocks! |
09-08-2015, 02:11 PM | #4 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
painted the body and made some rocker-guards: Last edited by tomster; 09-08-2015 at 02:15 PM. |
09-14-2015, 08:45 AM | #5 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
Mounted the SSD D60 axle case in the rear: |
09-15-2015, 02:51 PM | #6 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
Mounted the new front axlee housing: Got steering? Mounted the hood with some mini-hinges, will ad 2 nyodeme magnets to fix it in the front Last edited by tomster; 07-06-2016 at 03:16 AM. |
09-28-2015, 12:35 PM | #7 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
New grill out of lexan (test fit!) Stickers for the 3racing winch: Got the axles finished with all the links and Mip shaft in front, Traxxas out rear: |
10-07-2015, 05:08 AM | #8 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
Grill and lights are in! Currie Rock crawler Bumper in the works! |
10-13-2015, 01:03 AM | #9 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
Bumper & winch are mounted, i will create a new winchplate ones i have the new fairled. |
11-14-2015, 10:37 AM | #10 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
Finally some update.... First attempt on a rear swaybar: |
11-15-2015, 09:25 AM | #11 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
The recycling continous ! Used some old Axial shafts to connect the swaybar arms to the axle. Gesendet von meinem GT-I9295 mit Tapatalk |
11-15-2015, 09:29 AM | #12 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
The Interior fits, installed some cheap seats from Dinky RC to save some weight. Sunk the winch flat to the bumper, now it looks scale! Gesendet von meinem GT-I9295 mit Tapatalk Last edited by tomster; 11-17-2015 at 07:26 AM. |
12-02-2015, 02:36 PM | #13 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
Tomorrow i will try it on the rocks! Gesendet von meinem GT-I9295 mit Tapatalk |
12-03-2015, 06:35 AM | #14 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
On the rocks! Gesendet von meinem GT-I9295 mit Tapatalk |
12-03-2015, 06:48 AM | #15 |
Rock Stacker Join Date: Oct 2015 Location: Kingston, WA
Posts: 94
| Re: 1.9 Wraith-TJ build
Are you having any binding issues with your steering links flipped?
|
12-07-2015, 02:52 AM | #16 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
No, steering works great! I use XR10 knuckles and c's. together with Wraith plates. Anyone know about a 3D printed TJ grill or another way to make a grill more TJ likish? Gesendet von meinem GT-I9295 mit Tapatalk |
12-07-2015, 05:54 AM | #17 |
RCC Addict Join Date: Feb 2008 Location: your back yard
Posts: 1,305
| Re: 1.9 Wraith-TJ build
Build looks great. How did your sway bar work? Fantastic pictures of your area.. |
01-11-2016, 02:07 PM | #18 |
Pebble Pounder Join Date: Sep 2009 Location: Heart of the Alps
Posts: 119
| Re: 1.9 Wraith-TJ build
Sorry for the late answere... The rig handles great, it dosnt have much travel but at the other side its realy stable. Now we have snow and my playground is frozen up... but i want to test it more and also wirhout the swaybar to see the difference. Gesendet von meinem GT-I9295 mit Tapatalk |
1.9 Wraith-TJ build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1.9 wraith build or scx10 build? | Cork | Newbie General | 13 | 06-08-2015 08:17 AM |
My wraith build. | cg78 | Axial Wraith | 7 | 02-26-2013 10:35 PM |
| |