RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial Wraith (http://www.rccrawler.com/forum/axial-wraith/)
-   -   Forward Battery Conversion Battery Size (http://www.rccrawler.com/forum/axial-wraith/561772-forward-battery-conversion-battery-size.html)

jimmiejump 04-13-2016 06:03 AM

Forward Battery Conversion Battery Size
 
Gathering info on the Wraith Spawn for my next build. I would like to run a 3c lipo. My question is with the Werty WN-08 aluminum front battery plate installed what are the max allowable battery dimensions? Thanks in advance.

NWHavok 04-13-2016 07:03 AM

Re: Forward Battery Conversion Battery Size
 
Quote:

Originally Posted by jimmiejump (Post 5485360)
Gathering info on the Wraith Spawn for my next build. I would like to run a 3c lipo. My question is with the Werty WN-08 aluminum front battery plate installed what are the max allowable battery dimensions? Thanks in advance.

I have the same plate in my wraith and I run a 4S battery that measures out to 47mm tall ; 140mm wide ; 26mm deep with no issues. I wouldn't go any taller than 47mm (1.85") as it will hit the hood. You could go up to about 30mm (1.18") deep, if you're electronics box will let you. And maybe another 12mm (.5") on your width if you needed.

Hope this helps!

oldpunk 04-13-2016 08:07 AM

Re: Forward Battery Conversion Battery Size
 
The turnigy 5000 3s just bearly squeezes in mine. I don't think you'd need anything bigger(lasts like 3hrs...). There's plenty of room for most 4000's.


All times are GMT -6. The time now is 09:51 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com