Getting the servo lower on the axle
 

As title Im doing a build and the servo is a bit in the way on top of the truss. Is there anyway to get it lower on the axle or behind the axle?

I've done some searching and the dlux shorty truss looks ideal but shipping to the uk is not cheap so looking for a cheaper option. I'm able to braze and fabricate pretty well so if people have pictures of homemade options as well that would be great

Cheers
Adam
Uk

Re: Getting the servo lower on the axle
 

Dinky RC has these, not sure what shipping to the UK will be.

Wraith "Dinky Link" S-Type (Front)

Wraith "Dinky Link" S-Type (Rear)

Re: Getting the servo lower on the axle
 

Ye I've seen that one already thanks :-)

Re: Getting the servo lower on the axle
 

I'd been thinking of doing something like this as a 3d printed part.
I don't like the stock servo position sticking up on the top there.

Re: Getting the servo lower on the axle
 

http://www.rccrawler.com/forum/axles...ink-mount.html

Dlux is always an option for the sweetness

Re: Getting the servo lower on the axle
 

Yea, hard to beat the dlux truss.. Shipping to the uk can't be that much. It's small

Re: Getting the servo lower on the axle
 

The truss should only be $7 shipping international...