07-24-2016, 07:25 PM | #1 |
Quarry Creeper Join Date: Mar 2016 Location: Moses Lake
Posts: 442
| Wraith Problem
Well seem to be having an issue with my wraith, was hoping I could get some ideas on what it could be. Everything pretty much stock...stock length stock hight nothing lifted or lengthened. Everything seems to move nice and freely doesn't appear/feel like there is any binding....motor seems to be running a little hot too....some spots around 200 and some 115 on the motor. HH 27t motor torquemaster expert brushed 3s lipo Tranny gears all metal HR drive shafts 12t pinion/60t spur gear Slipper appears and feels nice and tight HH bxl esc (waterproof) Here's a little video seems to be fine going forward but not so much backward. Think I got everything any help would be appreciated thanks. https://youtu.be/9mHnepUGClU Sent From My Galaxy S6 Edge+ |
Sponsored Links | |
07-24-2016, 08:10 PM | #2 |
I wanna be Dave Join Date: Feb 2013 Location: NW Indiana
Posts: 3,196
| Re: Wraith Problem
number one, your gear mesh sounds too tight, number two, sounds like you have an ider gear in the trans stripping out...
|
07-24-2016, 08:14 PM | #3 |
Quarry Creeper Join Date: Mar 2016 Location: Moses Lake
Posts: 442
| Re: Wraith Problem
Thank you I'll check those out first. Sent From My Galaxy S6 Edge+ |
07-25-2016, 04:49 PM | #4 |
Quarry Creeper Join Date: Mar 2016 Location: Moses Lake
Posts: 442
| Re: Wraith Problem
Well I took the tranny out found 3 issues 1. My soldering job came off one of the motor wires 2. For some reason I didn't put bearings in the middle gear in the tranny not sure how I managed that lol I don't see bearing remains in there so I didn't put any in there wheird. 3. the screws that hold that bottom gear on the out put shafts all 3 came loose and looked stripped (the screws) all the tranny gears look like new found 3 more screws greased it up a bit and put it back together. When I did take the motor out there were metal shaving around the out side of the motor? Is that from the brushes? Still not sure which of those would make it sound bad and not move in reverse but work ok going forward. Or the heat. Sent From My Galaxy S6 Edge+ |
07-25-2016, 06:49 PM | #5 |
Quarry Creeper Join Date: Mar 2016 Location: Moses Lake
Posts: 442
| Re: Wraith Problem
Well got all 3 of those issues fixed runs great not sure on the heat just yet still have to take it for a run. Just ran enough to test it. Sent From My Galaxy S6 Edge+ |
07-26-2016, 11:47 AM | #6 |
Quarry Creeper Join Date: Mar 2015 Location: Woodland
Posts: 279
| Re: Wraith Problem
at least it can move properly now, run it and see, report back
|
Wraith Problem - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wraith problem. | Browner93 | Newbie General | 9 | 11-28-2013 09:15 PM |
Wraith problem. | Browner93 | General Crawlers | 6 | 11-15-2013 07:43 AM |
wraith universals problem | wraithchild | Axial Wraith | 0 | 02-05-2012 05:10 PM |
wraith problem | karrfab | Axial Wraith | 3 | 08-31-2011 12:59 PM |
Thread Tools | |
Display Modes | |
| |