M2.6 Screws

[RCDad57]

Is there a source for the M2.6 Screws for the Wraith in Stainless Steel?

[maslin]

Just use M3, .4mm isn't very big.

[Natedog]

Originally Posted by RCDad57

Is there a source for the M2.6 Screws for the Wraith in Stainless Steel?

Try McMaster-Carr, Googly search etc. Self-tapping or machine thread? I just bought some machine thread online the other day.

[mikemcE]

Check K&K


HANG UP AND DRIVE !

[lzysmrf]

also try FASTENERSEXPRESS.COM

[OSRC]

I picked up some 2.5 from Fastener Express and they worked fine.

Fastener Express - Socket Head Cap Screws, Metric Screws , Fasteners and Anodize - Metric Button Head Socket Screws Stainless

[mikebecher]

I use Albany County Fasteners | Stainless Steel Fasteners and More, they're the cheapest I've found and have always been good fasteners. Just as a random comparison on M3x16 - Fastener Express is $3.29 for 20 and ACF is $1.25 for 25.

I get my vehicle-specific kits from Team KNK but to stock up I use ACF. Here's my last order, 625 pieces, just over $26:

Socket Head Screws A2 SS - M2 x .4 x 6M (FT) Qty-25
Socket Head Screws A2 SS - M2 x .4 x 8M (FT) Qty-25
Button Socket Head Screws A2 SS - M3 x .5 x 6M (FT) Qty-25
Button Socket Head Screws A2 SS - M3 x .5 x 8M (FT) Qty-25
Button Socket Head Screws A2 SS - M3 x .5 x 10M (FT) Qty-25
Button Socket Head Screws A2 SS - M3 x .5 x 12M (FT) Qty-25
Button Socket Head Screws A2 SS - M3 x .5 x 14M (FT) Qty-25
Button Socket Head Screws A2 SS - M3 x .5 x 16M (FT) Qty-25
Button Socket Head Screws A2 SS - M3 x .5 x 20M (FT) Qty-25
Button Socket Head Screws A2 SS - M3 x .5 x 25M (FT) Qty-25
Button Socket Head Screws A2 SS - M3 x .5 x 35M (FT) Qty-25
Socket Head Screws A2 SS - M3 x .5 x 16M (FT) Qty-25
Flat Socket Head Screws A2 SS - M3 x .5 x 8M (FT) Qty-25
Flat Socket Head Screws A2 SS - M3 x .5 x 10M (FT) Qty-25
Flat Socket Head Screws A2 SS - M3 x .5 x 12M (FT) Qty-25
Flat Socket Head Screws A2 SS - M3 x .5 x 18M (FT) Qty-25
Flat Socket Head Screws A2 SS - M3 x .5 x 25M (FT) Qty-25
M3 x .5 x 3M Socket Set Screw Cup Point Metric A2 SS - QTY 25
M4 x .7 x 20M Socket Set Screw Cup Point Metric A2 SS - QTY 25
M4 x .7 x 20M Socket Set Screw Cup Point Metric A2 SS - QTY 25
Nylon Lock Nuts A2 SS - M3 x .5 (5.5 Flats x 4.0 Height) Qty-25
Flat Washers A2 SS - M2.5 (2.7M ID x 6.0M OD x 0.5M Thick) Qty-25
Flat Washers A2 SS - M3 (3.2M ID x 7.0M OD x 0.5M Thick) Qty-25
Flat Washers A2 SS - M4 (4.3M ID x 9.0M OD x 0.8M Thick) Qty-25
Flat Washers A2 SS - M5 (5.3M ID x 10.0M OD x 1.0M Thick) Qty-25

[Brake Weight]

Mrmetric.com is my go to. Subscribe to the newsletters and they'll have a 20% off every few months or so. Flat rate shipping, too, so make it a big order.

[moondaddy]

Originally Posted by maslin

Just use M3, .4mm isn't very big.

^this. Accidentally used m3x10mm when putting the spur cover on. Found my mistake when i went to put trans on skid. Swapped hw around and everything was fine.