RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial Wraith (http://www.rccrawler.com/forum/axial-wraith/)
-   -   Fuzzy's Spawn Basket Case (http://www.rccrawler.com/forum/axial-wraith/572470-fuzzys-spawn-basket-case.html)

fuzzy1 10-08-2016 04:30 PM

Fuzzy's Spawn Basket Case
 
So I picked this Wraith up locally yesterday on CL along with some other stuff. I bought it without asking any questions since the deal I got on it was too good to pass up

The good:

-Newer Castle Sidewinder 8th scale system with 2200KV motor
-Savox SW1211SG servo
-Spektrum TX/RX
-Aluminum links
-Aluminum front diff cover
-Aluminum steering links

The bad (so far):

-Some horrible front bumper
-Spur gear destroyed
-Trans case
-Trans skid
-Trans gears rusty
-Shocks that are way too big


I can't for the life of me figure out why the axles are clocked down so far, as far as I can tell the links are right but the axles are clocked a crazy amount

http://i156.photobucket.com/albums/t...ps29mid267.jpghttp://i156.photobucket.com/albums/t...psvkuhzjcb.jpghttp://i156.photobucket.com/albums/t...pssrg5idft.jpghttp://i156.photobucket.com/albums/t...psdbblato3.jpghttp://i156.photobucket.com/albums/t...ps9agnwoxg.jpghttp://i156.photobucket.com/albums/t...psxh4wms8e.jpghttp://i156.photobucket.com/albums/t...psxhkgsamu.jpghttp://i156.photobucket.com/albums/t...psgkikrpxz.jpghttp://i156.photobucket.com/albums/t...psdjawaqo9.jpghttp://i156.photobucket.com/albums/t...psymq0m4bs.jpghttp://i156.photobucket.com/albums/t...psdds0q64f.jpg

mikebecher 10-08-2016 06:03 PM

Re: Fuzzy's Spawn Basket Case
 
ESC was mounted to the roof?!? :lmao:

The axles are clocked like that to keep the driveshafts from binding completely due to those obnoxiously oversized shocks. Open up the diffs to see if those are stripped also.

It looks like this rig hasn't seen much off-road time, the axle housings and skid are in good condition. It was probably a concrete princess that someone put way too much power to.

fuzzy1 10-08-2016 07:04 PM

Re: Fuzzy's Spawn Basket Case
 
Quote:

Originally Posted by mikebecher (Post 5572888)
ESC was mounted to the roof?!? :lmao:

The axles are clocked like that to keep the driveshafts from binding completely due to those obnoxiously oversized shocks. Open up the diffs to see if those are stripped also.

It looks like this rig hasn't seen much off-road time, the axle housings and skid are in good condition. It was probably a concrete princess that someone put way too much power to.

Lol yeah the esc was the first thing that was removed. There is no interior so i guess he thought that was the best place.

As for the axles I compared it to my other wraith and with the shocks detached it's still like that when the skid is at normal ride height. I at first thought something was funny with the links but I guess I'll have to dive deeper and thrown the stock shocks back on.

Other than that got my list of parts to get at the lbs tomorrow

New spur
Skidplate
Clamping wheel hexes
Front bumper/ support
Trans case

That's at least the beginning we'll see where she goes from there. Gotta make a plan since I already have a trail/crawler wraith

mikebecher 10-08-2016 07:34 PM

Re: Fuzzy's Spawn Basket Case
 
Get a full set of bearings too.

smartcomm 10-09-2016 01:41 PM

Re: Fuzzy's Spawn Basket Case
 
The upper links look like that have rod ends that were cut off the stock plastic links. So maybe they are the wrong length

fuzzy1 10-09-2016 03:50 PM

Re: Fuzzy's Spawn Basket Case
 
I believe the problem is lying within the rod ends, I have tried everything else. Gonna add a swt of the axial rod ends to my lost and try to match the links up with my other wraith and hopefully get this resolved. I should only have to wait on the trans case i the mail everything else my lhs has

Sent from my SM-N930V using Tapatalk

fuzzy1 10-09-2016 06:32 PM

Re: Fuzzy's Spawn Basket Case
 
This is how it's sitting tonight until parts come in

http://uploads.tapatalk-cdn.com/2016...c06e99da3b.jpg

Sent from my SM-N930V using Tapatalk

fuzzy1 10-11-2016 06:04 PM

Re: Fuzzy's Spawn Basket Case
 
Got the link issue figured out, the upper links are longer than normal so with long rod ends on all of the lower links and short rod ends on all of the uppers it straightened out the axles, 1 problem down who knows how many to go.....

http://uploads.tapatalk-cdn.com/2016...0a37261aaf.jpg

looneybin 10-13-2016 06:53 AM

Re: Fuzzy's Spawn Basket Case
 
one other thing. I had one that the axle link mounts were on upside down and that threw the links off.

Traulus 10-13-2016 11:11 AM

Re: Fuzzy's Spawn Basket Case
 
That front bumper looks horible.And it looks like it has an ax10 trans case?

Sent from my SM-N910F using Tapatalk

Killerbyrd14 10-13-2016 11:49 AM

Re: Fuzzy's Spawn Basket Case
 
Quote:

Originally Posted by Traulus (Post 5575024)
That front bumper looks horible.And it looks like it has an ax10 trans case?

Sent from my SM-N910F using Tapatalk



I thought wraith and ax10 had same case with different gears.


Sent from my iPhone using Tapatalk

fuzzy1 10-13-2016 12:15 PM

Re: Fuzzy's Spawn Basket Case
 
Quote:

Originally Posted by looneybin (Post 5574920)
one other thing. I had one that the axle link mounts were on upside down and that threw the links off.

I thought that too so I flipped the rear axle ones and it didn't fix anything, My other wraith has them the same as these so I just flipped them back around

The trans case is the right one I just installed the replacement yesterday. The trans feels a lot better now but still doesn't feel great. Gonna throw a set of bearings in and see if that smooths it out at all, if not a new set of gears will go in. Makes me wish I would have just bought a complete trans to begin with but like we all know hindsight is 20/20

Traulus 10-14-2016 03:00 PM

Re: Fuzzy's Spawn Basket Case
 
From the picture it lookslike an scx10 trans.Wraith teans is bigger as it can be upgraded to 2 speeds transmision.Anyway looks alot of work needs to be done.Good thing is that you can add directly upgraded parts

Sent from my SM-N910F using Tapatalk

mikebecher 10-14-2016 03:06 PM

Re: Fuzzy's Spawn Basket Case
 
Quote:

Originally Posted by Traulus (Post 5575502)
From the picture it lookslike an scx10 trans.Wraith teans is bigger as it can be upgraded to 2 speeds transmision.Anyway looks alot of work needs to be done.Good thing is that you can add directly upgraded parts

Sent from my SM-N910F using Tapatalk

The Wraith tranny can be upgraded with dig as opposed to 2 speed. It's the Yeti/Bomber and new SCX10 transmissions that can upgrade to 2 speed.

Traulus 10-14-2016 03:08 PM

Re: Fuzzy's Spawn Basket Case
 
Oh yeah...dig...sorry,my mistake

Sent from my SM-N910F using Tapatalk

fuzzy1 11-23-2016 04:37 PM

Re: Fuzzy's Spawn Basket Case
 
Update!

Got the new transmission case and skid plate installed

Ordered a Locked Up RC slipper eliminator and got that installed

New spur gear installed

Attempt to mount the motor and the motor plate is bent

Ordering more parts............

http://i156.photobucket.com/albums/t...psoze100ny.jpghttp://i156.photobucket.com/albums/t...psxprnhxug.jpghttp://i156.photobucket.com/albums/t...psb1dkmvin.jpg

Thechewmaster 11-23-2016 09:04 PM

Re: Fuzzy's Spawn Basket Case
 
No wonder he exploded the spur gear. Ahhhh waiting for parts

At least you are in Wisconsin in the winter, you got no where to go. Just got to wait, wait, wait.

I don't remember my motor plate having the differing hole sizes for the screws. Now I'm curious, gonna check mine

Ya going to stick with the. . . . . big wheels?

fuzzy1 11-25-2016 03:19 PM

Re: Fuzzy's Spawn Basket Case
 
Quote:

Originally Posted by Thechewmaster (Post 5593936)
No wonder he exploded the spur gear. Ahhhh waiting for parts

At least you are in Wisconsin in the winter, you got no where to go. Just got to wait, wait, wait.

I don't remember my motor plate having the differing hole sizes for the screws. Now I'm curious, gonna check mine

Ya going to stick with the. . . . . big wheels?


The previous owner drilled out the motor plate to allow the gear ratio he was running, new motor plate is on the way. Not sure about the wheels/tires I have a couple other options.

Oh and as for the weather, That would be the case any other year but this is what we're looking at currently

http://i156.photobucket.com/albums/t...pshh7gheyp.jpg


All times are GMT -6. The time now is 11:18 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com