Electronic layout??
 

So I have a wraith hybrid that Iam getting ready. Wraith cage,scx10 axles and dmg rear stiffy plus more. How are you guys laying out your electronics? I need to buy some type of under the hood electronics tray but not happy with any i have seen.

Re: Electronic layout??
 

How about these
http://www.rccrawler.com/forum/chass...onics-box.html

Re: Electronic layout??
 

What trays have you looked at? My 2 cents would be inner fenders for the front, Crawler Innovations electronics tray, and then add a small custom piece of Lexan as a front wall from fender to fender to keep out mud/water.

Re: Electronic layout??
 

I use "Da Box" from The Crawl Space, which frontedge just linked. I trimmed mine a bit but I have a Holmes BLE, Castle BEC, RX, and a 4000mAh 3S all stuffed up front.

Re: Electronic layout??
 

I just have the old Crawler Innovations plate. Esc, bec, rx and battery all fit under the hood along with a cms cramping the situation up front. Even cut out a little aluminum "engine cover" to slide over top of everything to clean it up. "thumbsup"

Re: Electronic layout??
 

Here's my layout. Didn't cost a dime. Made the receiver mount out of a piece of flashing.
https://c1.staticflickr.com/3/2692/3...6eb85c42_c.jpg2017-02-23_11-42-46 by thetastelingers, on Flickr

OEM battery box fits fine. One screw in the middle and zip ties at the corners.
https://c1.staticflickr.com/3/2317/3...20601232_c.jpg2017-02-23_11-42-25 by thetastelingers, on Flickr


Everything fits under the OEM interior.
I had to trim the footwells a little for the battery to clear.