|
| LinkBack | Thread Tools | Display Modes |
06-05-2017, 07:07 PM | #1 |
Newbie Join Date: Dec 2009 Location: placentia
Posts: 21
| Full tuber using wraith skid
So I've decided to put my skills to use and build/post a chassis, it's all 4130 3/16 and 1/8 rod and .090 plate for the rails. The last picture is my first build
|
Sponsored Links | |
06-06-2017, 07:06 PM | #2 |
Newbie Join Date: Dec 2009 Location: placentia
Posts: 21
| Re: Full tuber using wraith skid
Only added one tube today. I orderd the apache c1 cockpit today and some 103mm gmades today, so I will start on the cab hopefully this weekend
|
06-06-2017, 11:28 PM | #3 |
Rock Stacker Join Date: May 2017 Location: London
Posts: 54
| Re: Full tuber using wraith skid
Amazing stuff. This is something I'd possibly like to get into later on. I'm just scared of the unknown and all the equipment requirements. What do you need to make it happen? I have a good understanding of how this could be made but can't quite imagine the practicalities of it.
|
06-06-2017, 11:40 PM | #4 |
Newbie Join Date: Dec 2009 Location: placentia
Posts: 21
| Re: Full tuber using wraith skid
Welded or good brazing a vise a cut off wheel a belt sander and some straight edges
|
06-08-2017, 10:16 AM | #5 |
Newbie Join Date: Dec 2009 Location: placentia
Posts: 21
| Re: Full tuber using wraith skid
Cab on its way
|
06-08-2017, 11:09 AM | #6 |
Newbie Join Date: Dec 2009 Location: placentia
Posts: 21
| Re: Full tuber using wraith skid
Roof complete
|
06-08-2017, 11:15 AM | #7 |
Quarry Creeper Join Date: Oct 2016 Location: Hanover
Posts: 304
| Re: Full tuber using wraith skid
Nice! Where did you get the interior driver/passenger piece from? |
06-08-2017, 11:29 AM | #8 |
Newbie Join Date: Dec 2009 Location: placentia
Posts: 21
| Re: Full tuber using wraith skid
Hpi apache c1
|
06-12-2017, 11:45 AM | #9 |
Newbie Join Date: Dec 2009 Location: placentia
Posts: 21
| Re: Full tuber using wraith skid
Front end is getting tacked up
|
Thread Tools | |
Display Modes | |
| |