shocks
 

so I'm looking to upgrade my stock wraith shocks, id like to go a little longer but not too much. running a yeah racing droop kit. mostly into rock crawling and trail running

Re: shocks
 

I was thinking of tossing yeti shocks on mine. Not sure as the length is a little longer than I want. I was wanting 95-100mm. They are 127mm for the xl.

Sent from my SM-N920V using Tapatalk

Re: shocks
 

yeah I was thinking about the axial icons but they are either 103 or 125 and I think wanna be around 110

Re: shocks
 

I'm running RC10 T4 rear shocks on my wraith and they work quite well. I don't remember the length and AE doesn't seem to list the total length but I believe it's in the 95-100mm range. You will have to space them out farther as they are 12mm bore but longer mount screws, spacers and fuel tubing works just fine.

Re: shocks
 

Thank you bub I appreciate it

Sent from my SM-N920V using Tapatalk

Re: shocks
 

I'm running axial Yeti rears and proline 5" . I used a lowering kit to adjust ride height as I run super soft springs for articulation , a sway bar out back for speed but not crawling
https://uploads.tapatalk-cdn.com/201...2aced3f227.jpg
https://uploads.tapatalk-cdn.com/201...457ea2fb71.jpg


Hang up and Drive

Re: shocks
 

She looks good. I was originally looking at tossing some yeti shocks on. Found out they would be a but tall for what I want. Ended up going with gmade xd rear shocks all the around.

Sent from my SM-N920V using Tapatalk