|
| LinkBack | Thread Tools | Display Modes |
10-12-2017, 06:41 PM | #21 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction
Picked up some sweet Chinese knockoff Vanquish style wheels and Proline BF Goodrich T/A K02's.
|
Sponsored Links | |
10-12-2017, 06:47 PM | #22 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction
Ordered up some new diff covers after seeing how thin the Hot Racing units were, very pleased with the STRC units. Added VP trusses, VR servo bracket and VP steering setup. A Promodler servo will be added soon.
|
10-12-2017, 07:02 PM | #23 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction
I ordered a few other upgrades as well which should be here shortly: Holmes Torque Master 35T Hobbywing Quicrun 1080 DMG Diff skid plates Clamping 12mm hexes |
10-15-2017, 07:04 AM | #24 |
Quarry Creeper Join Date: Feb 2014 Location: NNJ in the sticks
Posts: 210
| Re: New Wraith Owner and Intorduction
I have the same setup on mine. The vanquish trusses and mount are wonderfully made and the STRC covers certainly can take a hit.
|
10-15-2017, 07:35 AM | #25 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: New Wraith Owner and Intorduction
Look into the VP servo clamps.... with the PM it will keep things tight Hang up and Drive |
10-18-2017, 11:29 AM | #26 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction
Had some free time over the weekend so I finished filling up the shocks and re-assembling them and then re-installed all the upper and lower links to the main plate and axles.
Last edited by TAMELESSTGR; 10-18-2017 at 02:46 PM. |
10-18-2017, 11:32 AM | #27 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction
Dropped in the new (used) Holmes 35T and made an electronics tray for the Hobbywing 1080 and Futaba Rx I will be using. These will tuck nicely under the Spawn interior. I also tried the beefier driveshaft mod for the time being, will see how they hold up front and rear.
|
10-18-2017, 11:35 AM | #28 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction
I have been looking at a lot of fastback mods, and I knew I wanted to do it, but I wasn't particularly happy with just bending the cage and having an arc in it. I like the sharper bend so I trimmed off the brace area and notched that part of the tube hoping it would allow for a tighter bend. I'm pretty happy with them, might heat a few more times just to make sure there is no bow.
|
10-19-2017, 01:56 PM | #29 |
Newbie Join Date: Nov 2011 Location: Western
Posts: 31
| Re: New Wraith Owner and Intorduction
Looks like going to be a good build buddy. Are those wheels a true beadlock? How they holding up? Love color choice
|
10-19-2017, 02:12 PM | #30 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction Haven't actually run them yet, I ran the rig 2x after I got it and quickly started tearing it down to make changes. The Black Chinese Vanquish knockoffs are a true beadlock and hold the beads really well.
|
10-26-2017, 10:12 AM | #31 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction
Some updates on my progress: Dinky RC rear tray cut to fit and adding an Axial fuel cell from a Yeti. Bigger than I had anticipated, but I trimmed the bottom out to make this fit, I will be mounting Axial radiator and fans ontop of the fuel cell under a future Gear Head RC rear light bar. |
10-26-2017, 10:15 AM | #32 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction
I also picked up an SCX10 style bumper for $14 on eBay. Wanted this look, but not the cost for some of the bumpers out on the market. Made it work by securing through a crossbrace screw location and some thick zip ties. It feels pretty secure, will have to see how it fairs if it ever takes a tumble, but for now I am pleased. Will provide an excellent mounting spot for a front 2" light bar. The bumper is from a company called: topracing2000 https://www.ebay.com/usr/topracing20...p2047675.l2559 |
10-26-2017, 10:40 AM | #33 |
RCC Addict Join Date: Jun 2006 Location: Durham, NC, USA
Posts: 1,164
| Re: New Wraith Owner and Intorduction
are you going to mount a winch on the bumper?
|
10-26-2017, 10:52 AM | #34 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction |
10-26-2017, 12:45 PM | #35 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: New Wraith Owner and Intorduction
Nice build. I liked the raw aluminum look as well. I'm not really a fan of gold, but I do like the gold color of the Bomber parts. This looks similar. Anything is better than that puke green which is what my lightly used Wraith came with.
|
10-26-2017, 12:49 PM | #36 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction
I keep looking at the gold links and will probably sand them down to the aluminum. Will also depend on what I end up doing with the paint scheme for my body panels.
|
10-27-2017, 08:20 AM | #37 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction
Wasn't planning on wrapping panels last night, but Carbon Fiber vinyl and a heat gun did the trick.
|
10-27-2017, 08:22 AM | #38 |
Rock Stacker Join Date: Sep 2016 Location: Bolingbrook
Posts: 61
| Re: New Wraith Owner and Intorduction
Tried painting the Proline Titus beadlocks a gun metal color, might have to lighten it up to a silver color, I'll see how it grows on me.
|
10-27-2017, 08:52 AM | #39 |
I wanna be Dave Join Date: Jul 2014 Location: Deep South
Posts: 3,444
| Re: New Wraith Owner and Intorduction
You're vinyl came out better than mine did.
|
10-27-2017, 09:20 AM | #40 | |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: New Wraith Owner and Intorduction Quote:
But black and shiny works great too if you decided to sand them down. | |
New Wraith Owner and Intorduction - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Wraith Owner | 03NCTJ | Axial Wraith | 7 | 01-22-2016 02:12 PM |
Intorduction | sader44 | Newbie General | 2 | 11-25-2015 10:59 AM |
new wraith owner!! | Wilt | Axial Wraith | 4 | 06-10-2015 04:35 PM |
Soon to be wraith owner.... | ProfitOfDoom | Axial Wraith | 3 | 05-01-2013 06:54 AM |
new wraith owner | ld markey | Michigan | 12 | 10-31-2011 06:04 PM |
Thread Tools | |
Display Modes | |
| |