Re: Wraith based Rock Bouncer Quote:
Back in the day a well built motor had “500” today the factory bad boys are at 800! I still remember flatheads.....60 horse Hang up and Drive |
Re: Wraith based Rock Bouncer Quote:
|
Re: Wraith based Rock Bouncer Quote:
The new, new motors. The Magnums. https://holmeshobbies.com/motors/bru...agnum-540.html |
Re: Wraith based Rock Bouncer Quote:
Traveling for work this week, but hoping to get everything soldered, hooked up, located in the rig and installed this coming weekend. I’ll post up when I do. |
Wraith based Rock Bouncer Delrin spur saves you once, then take it apart and redo. I like my slipper. It's big and beefy, once it worn it is quite reliable. |
Re: Wraith based Rock Bouncer Quote:
"thumbsup" |
Re: Wraith based Rock Bouncer I agree Durok. At that pricepoint, you're well within brushless territory. Having said that, my little Barronco project with it's 30T TorqueMaster has really made me appreciate a good brushed set up again. But, it's a $50 motor, not $150. |
Re: Wraith based Rock Bouncer Well I for one have a bit of hole burning in my pocket (gift certificates) and I sprung for the new Magnum motor, I also wanted to support Holmes after hearing how Castles crawler motors have cut into their share of the crawler market. Anyway I'm really liking the Magnum motor, it has a great range of speed on 3S, it sounds a little more high pitched than a Crawlmaster motor, its kind of a screamer at full chat (the sound). Its in my Ascender which had a 13T Crawlmaster before, now an 11T and I need to gear it down a hair. I'm a sucker for a nice brushed motor, there's just something special about the sound and feel while just creeping along that's missing with brushless IMO. But the less expensive Holmes motors offer close to the same feel and performance as their top shelf stuff. |
Re: Wraith based Rock Bouncer I'm now sad.......... :cry: |
Re: Wraith based Rock Bouncer Quote:
..... I do miss my Grand National. Nothing but mild port/polish, 55# Injectors, Chip, 3-1/2" Exhaust, and 3.90 gears - 11.80's all day, breaking loose about 70ft out of the hole! * Comfortable, handled like a CAR, 24mpg (when I was nice!!), and ice cold A/C!! It was the beginning of the new breed of Performance Cars. Mike, this gets exponentially more BADASS every time I look!!! 8) "thumbsup" "thumbsup" Can't wait to see what she'll do with that "Big Block"!! ;-) My ONLY progress has been finally getting a new 20kg all Metal Gear Servo, and I made a "Glitch Buster" out of an old Batry Lead, and the biggest Capacitor I could find in my junk. Hopefully, she will be moving under her own power soon. Thanks again to Jake at Wounded Warriors for the Servo - in case you're on this Forum! |
Re: Wraith based Rock Bouncer 4 Attachment(s) Got the aluminum panels wrapped with the vinyl I ordered. I am really liking the look. Having said that, for a guy who cannot stand to wrap Christmas presents or anything else, it was a bit of a pain in the a--! With the wife being the designated gift wrapper of the house, and far more adept at it then me, I had her do the more complex hood. She knocked it outta the park! (I'll be running to get her a Venti Starbucks Latte tomorrow per her request!:lmao:) I'm gonna try and get in to soldering up the ESC connector and extending the motor leads tonight or tomorrow. I was traveling all this week and got home to a jungle of a lawn, so it was yard work most of the day today.:cry: |
Re: Wraith based Rock Bouncer Sweet !! Worked out great on the hood !! Hang up and Drive |
Re: Wraith based Rock Bouncer Thanks guys!"thumbsup" I'm really liking it. Also like the fact that if I get tired of it I can just order some different vinyl. |
Re: Wraith based Rock Bouncer @Steve g - Thanks! It has started to grow on me more now that everything is mostly complete. I do like the fact that it was recycled to be used again as well. (I gave him a bit of a neck extension courtesy of a plastic shock stand-off to get the helmet a bit higher in the interior.) I may still peep one of those Spawn interiors just to have on hand. Crazy how hard they've gotten to find. I pulled off the funky little mesh sticker that was on the hood earlier too. Thought it might be cool to show some sort of "ventilation" out of the hood. I kinda liked it at first, but then nah. (Almost looks like the scratchy part of a velcro strip in the pics) |
Re: Wraith based Rock Bouncer Really liking that gray camo "thumbsup" |
Re: Wraith based Rock Bouncer Quote:
|
Re: Wraith based Rock Bouncer 3 Attachment(s) She's ALIVE! And, she is an absolute BEAST! Straight up ballooning the 2.2's at full throttle. Wheelies. So much power and torque. Maybe too much!? Nahhh! First impressions from my little shake-down run. I'm going to need some dense, single stage foams, and possibly different tires. The ballooning was making me laugh, but it's definitely not practical. Shocks. I think I'm going to go to a heavier oil, and I need to add a bit more pre-load at all four corners. Just going to take some playing around to get it where I want. Motor temps seemed good with the 11/57 pinion/spur set up. But, I'm going to have to keep an eye on it for a while since this was only about 20 mins of run time. Power delivery. Like I said, it's insane. I'm probably going to have to play with the throttle curve in CastleLink to mellow it out a bit. I've also got to do a little cable management under the hood and clean up my runs a bit. I was way to amped to get her out on the shakedown to take the time to do that today though. :lmao: All in all I'm very pleased and with some dialing-in she is going to be one helluva fun rig I believe. "thumbsup" |
Re: Wraith based Rock Bouncer Great to hear, will you do some video? On the shock side, do you think heavier oil will be better that firmer springs? Keen to see which works best as I need to firm up as well! Sent from my Pixel using Tapatalk |
Re: Wraith based Rock Bouncer 1 Attachment(s) Got the single stage CI foams in - forgot I had them from the old AX-10. Tire situation seems to be cured. Also played with the pre-load. It's better, but still not where I want it. I'm thinking I may go to a shorter travel shock. The King 120mm may be a bit too long. The articulation is great, but at any sort of speed it's just wallowing and wanting to roll. I realize it's not an SC truck, and I'll keep dialing and playing with these to see if I can get them where I want them first. Also had the first breakage. (That was quick). Rod end on the Yeti trailing arms snapped off. I had the same problem with the aluminum Losi units on my Baja Rey. Metal links, plastic rod-ends - when something has to give it's going to be the plastic every time. I ended up going with all metal end to end HR links on the Baja Rey and it was problem solved. We'll see if this was an isolated incident or if it's going to be ongoing. |
Re: Wraith based Rock Bouncer Quote:
Well, the re-bound was way too quick so that's where the heavier oil will come in to play. Should slow it down a good bit. As far as the springs, I'll have to keep testing and see. Honestly, I think the rate is there and I can just kind of play with the pre-load a bit as I've done to get my sag / ride height where I want it. As far as video, I need to reset my youtube password so I can post it there and place a link here. I'll try and do that tonight. "thumbsup" |
All times are GMT -6. The time now is 01:41 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com