Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Wraith


Thread: Tenshock 906 good for wraith?

LinkBack Thread Tools Display Modes
Old 01-25-2019, 10:04 PM   #1
Pebble Pounder
Join Date: Oct 2004
Location: Eastlake,OH
Posts: 179
Default Tenshock 906 good for wraith?

I havent been out in a while and going to go out of town in a month or so to meet up with a buddy, so I been dusting off my old wraith getting ready. I was thinking of putting a new motor in it, as of right now I have a titan motor from a summit.

Was thinking getting that tenshock 906, any thoughts on this motor? Id like to get something in there fairly cheap but decent, if you know of something decent let me know.

Also if I get the tenshock I see it has 6 poles...right now I have a old castle sidewinder maybe a V2...will thos run a 6 pole or I will need a new esc? Thanks
ProfitOfDoom is offline   Reply With Quote
Sponsored Links
Old 01-29-2019, 01:24 PM   #2
Rock Crawler
Join Date: Jun 2017
Location: Land of burning couches
Posts: 831
Default Re: Tenshock 906 good for wraith?

I saw the 1700kv version used in a redcat gen8 and it crawled incredibly well. Obviously the gearing in wraith will be different, but low end wise, it had very minimal cogging when paired up with a mamba X. I think you could get away with a sidewinder 4, I don't know about the older ones.
DukeMinnix is online now   Reply With Quote
Old 02-21-2019, 10:01 AM   #3
Join Date: Jul 2017
Location: Austin
Posts: 34
Default Re: Tenshock 906 good for wraith?

My kid has the 1275kv Tenshock and a Sidewinder 3 ESC and his Wraith is super smooth (geared pretty low of course) on 2s. I love their brushless sensorless motors. Go for it!
AGHolman is online now   Reply With Quote

Tenshock 906 good for wraith? - Similar Threads
Thread Thread Starter Forum Replies Last Post
Tenshock RC906: yes or no ? ColdFox Electronics 70 02-17-2019 12:51 AM
2nd Annual 906 G6 Challenge - October 6, 2018 rm25x Michigan 0 04-09-2018 06:02 AM
Tenshock SC411 question. RebelRacer Electronics 5 10-23-2013 08:09 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 12:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com