| |
07-01-2019, 04:58 PM
| #1 |
| Rock Crawler Join Date: Dec 2005 Location: Marietta
Posts: 917
|  1.9 steering servo
What is everyone running for a steering servo on the 109 Wraiths? I picked up one of the 25KG servos, but it was so tall the servo arm contacted the panhard bar. I ended up mounting the servo from the top and used a Baja Ray servo arm to clear everything.  Mounting the servo from the top presented a problem because the electronics box would no longer go on because Axial decided that form > function and it's more important for the electronics box to look like an engine than actually be functional. I had to design and 3D print a new box cover. While I was at it I gave myself 10mm more room on the inside to stuff the wiring for my BEC bypass harness. Not my best print, but it works. I still despise that the screws are on the bottom instead of somewhere actually convenient.  |
|  |
| Sponsored Links | |
| | |
|
08-27-2019, 09:12 PM
| #2 |
| Pebble Pounder Join Date: Jan 2010 Location: CA
Posts: 102
| Re: 1.9 steering servo
That is a nice fix. I agree with you on the function vs looks on the front end. Does anyone know which servos are short enough to drop in without doing this mod?
Last edited by Psycho-Savvy; 08-27-2019 at 09:15 PM. |
|
| |
|
10-01-2019, 07:49 PM
| #3 |
| Quarry Creeper Join Date: Dec 2012 Location: okc
Posts: 251
| Re: 1.9 steering servo
I have run the Eco 120t from a main and am now using the Protek 370 tlb with no problems
|
|
| |
 |
1.9 steering servo - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Steering Servo/Dig Servo Questions | YJJPWrangler | Electronics | 5 | 02-02-2011 10:59 PM |
| Mamba max, 11.1 1350 mil 25c, 5955tg steering servo, 5645mg dig servo | BEAU | Electronics | 5 | 01-21-2009 02:36 PM |
| |
Linear Mode
