|
| LinkBack | Thread Tools | Display Modes |
10-01-2019, 05:27 PM | #1 |
Newbie Join Date: May 2019 Location: canada
Posts: 29
| DIY slipper eliminator using parts you already have
Hey guys just wanted to make a thread sharing the slipper eliminator i made for my axial wraith all i used was the inner slipper plate i just clamped it to my spur gear and centered it by putting the inner slipper plate through the slipper gears hole after that i drilled a hole when drilling i went through the hole in the slipper gear to ensure it is in the perfect spot after that i screwed and put a nut on the end and i did the same thing 2 more times it works perfect a if you do end up doing it i recommend when drilling the holes use a drill bit that is a tiny amount smaller then the screws your using so you can actually thread the screw in to the hole you made i know this is a very poor explanation but heres some pictures not even sure if this will interest anyone but i love how my wraith works now it has so much more power i know things are more likely to break but thats fine i just am careful if the tire gets jammed in a rock i let off the throttle . the picture of the part at the bottom is the exact piece i used to do this when you buy the wraith you get it so you dont even need to buy any parts to do this mod i highly recommend lock tight on the screws and nut Last edited by kushboss; 10-01-2019 at 05:30 PM. |
Sponsored Links | |
10-01-2019, 05:33 PM | #2 |
Newbie Join Date: May 2019 Location: canada
Posts: 29
| Re: DIY slipper eliminator using parts you already have
just incase anyone was wondering im running a 32p 58t spur and a 12t pinion with a 3800kv 1410 castle brushless sensored motor
|
02-15-2020, 11:25 AM | #3 |
Pebble Pounder Join Date: Jan 2020 Location: Northern Utah
Posts: 118
| Re: DIY slipper eliminator using parts you already have
can you post a couple more pics? This looks like what I am thinking of doing- what size bolts/nuts did you wind up using I'm interested |
Tags |
axial wraith, diy, slipper elimantor, wraith slipper |
DIY slipper eliminator using parts you already have - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SCX10 II - Slipper Eliminator | Locked Up | Axial SCX10 II | 9 | 10-14-2016 07:29 AM |
Slipper Eliminator | josh6575 | Vaterra Ascender | 4 | 11-07-2015 02:08 PM |
Slipper eliminator | Tru3Racing | Axial SCX-10 | 6 | 03-15-2011 02:55 PM |
| |