| |
04-21-2020, 08:52 PM
| #1 |
| Newbie Join Date: Apr 2020 Location: Roy
Posts: 13
|  Wraith spawn esc help
The esc went out in my spawn so I got a 40a dynamite brushed esc with a castle 10amp bec for my steering servo and i plug it all in and the esc just blinks red after the three beeps. Any help is appreciated.
|
|  |
| Sponsored Links | |
| | |
|
04-21-2020, 11:22 PM
| #2 |
| RCC Addict Join Date: Mar 2019 Location: Hemet
Posts: 1,214
| Re: Wraith spawn esc help
What model number esc is it? Do you have steering? Sent from my iPhone using Tapatalk Last edited by Fricker08; 04-21-2020 at 11:40 PM. |
|
| |
|
04-22-2020, 06:33 AM
| #3 |
| Newbie Join Date: Apr 2020 Location: Roy
Posts: 13
| Re: Wraith spawn esc help
Part number is DYNS2214 and no steering or throttle.
|
|
| |
|
04-22-2020, 07:26 AM
| #4 |
| Quarry Creeper Join Date: Mar 2014 Location: Masshole
Posts: 224
| Re: Wraith spawn esc help
Did you go through the setup / calibration in the manual for this ESC? https://www.horizonhobby.com/pdf/DYNS0900-Manual-ML.pdf If you did not start here. If you did what step are you having issues with? |
|
| |
|
04-22-2020, 07:42 AM
| #5 |
| Rock Crawler Join Date: Dec 2005 Location: Marietta
Posts: 917
| Re: Wraith spawn esc help
No steering? Did you plug the steering servo in backwards?
|
|
| |
|
04-22-2020, 07:57 AM
| #6 |
| RCC Addict Join Date: Mar 2019 Location: Hemet
Posts: 1,214
| Re: Wraith spawn esc help
I wouldn’t think the steering servo is plugged in backwards, but maybe the esc to receiver? Is the esc plugged into the correct spot in the receiver? Should be channel 2 and the black wire should be towards the outside of the receiver with the white wire next to the channel number. If everything is hooked up properly according to the troubleshooting, you have low battery voltage or the radio and receiver aren’t bound properly. Which radio are you using?  Sent from my iPhone using Tapatalk |
|
| |
|
04-22-2020, 04:35 PM
| #7 |
| Newbie Join Date: Apr 2020 Location: Roy
Posts: 13
| Re: Wraith spawn esc help
Just got home from work and I flipped the plugs on the receiver and everything works now. Except my servo is making a horrible screeching like sound right when it's all turned on. Thank you all for the help!
|
|
| |
|
04-22-2020, 04:38 PM
| #8 |
| Newbie Join Date: Apr 2020 Location: Roy
Posts: 13
| Re: Wraith spawn esc help
Also I am following the directions for the esc to set it for my 3s lipo but cant tell if it's set correctly.
|
|
| |
|
04-22-2020, 05:31 PM
| #9 |
| RCC Addict Join Date: Mar 2019 Location: Hemet
Posts: 1,214
| Re: Wraith spawn esc help
What servo are you running? And it looks like if it beeps 3 times when you power it up it’s on 3s Once for nimh and twice for 2s Sent from my iPhone using Tapatalk |
|
| |
|
04-22-2020, 06:13 PM
| #10 |
| Newbie Join Date: Apr 2020 Location: Roy
Posts: 13
| Re: Wraith spawn esc help
Also I am following the directions for the esc to set it for my 3s lipo but cant tell if it's set correctly.
|
|
| |
|
04-22-2020, 06:14 PM
| #11 |
| Newbie Join Date: Apr 2020 Location: Roy
Posts: 13
| Re: Wraith spawn esc help
I'm using a traxxas high torque 330 metal gear servo
|
|
| |
 |
Wraith spawn esc help - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| axial wraith / spawn ae-3 esc & 3150kv | JK17WH | Axial Wraith | 9 | 01-30-2019 06:53 PM |
| TeamOrion VortexR10 Pro - ESC: Set up Question (Wraith Spawn) | Mendoza | Newbie General | 1 | 05-09-2016 04:24 AM |
| Wraith Spawn Motor/ESC Combo | sharkattack99 | Axial Wraith | 40 | 03-20-2016 06:51 PM |
| Stock axial wraith spawn esc | Catdriver | Newbie General | 3 | 01-11-2016 10:59 PM |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
