XR10 Picture Archive

[Tremelle]

My new contribution to the pics archive.

[ash38]

Hulksta Team chassis
Hulksta Ti links
Hulksta CF 3 piece wheels
Brood 35tHHK Vapors
2xMSW
Hitec 7980
CC BEC
MISC VP Parts
Hulksta rear brace and steering arm
drilled RC4WD gears
alloy hardware
Skins by me

[noname0383]

YSS DD chassis

XR10 Axles: VP C-Hubs, knuckles, outers, gear boxes, upper mounts, and motor plates. New axle shafts front and rear, light weight gears front and rear, new plastic housings.
VP knuckle weights and robinson pinions

Most hardware: orange aluminum

traxxas big bore shocks with cap mods, jeepin doug spring mounts and mini t spring kits rear and scx10 front

Custom Lunsford Titanium bent links upper/lower w/revo ends

MrV wheels 2.2, .75''
VP hubs 725-600

Tires: ottsix voodoo silver/blue
Foams: CI double deuce fort front, med rear 5.5", narrow inner

2x Tekin fxr esc all wired up with deans.
2x tekin Handwound 35t motors
CC Bec
Savox sc1256
Alu servo arm

RR batt axle mount

Body Parma 10223 x-citer body

[stelerzman]

Here are some pic's of my current rig.











I hope you like.

[mr4x4king]

[richard2744]

My XR ready for testing

[ItsDaKine]

I'm new to crawling and own a scaler but after driving a friends Comp Crawler I was hooked instantly so I decided to get an XR10. I was able to get a kit from a friend after finding out it was discontinued. The original plan was to build it stock and replace only what was needed but if you look at the list below you can see how well that went. LOL.

-XR10 Kit
-Axial stage 2 C.F. kit (bought from classifieds)
-Chaotic Crawlers Titanium link set, sliders & steering link (straight)
-I Modified Dlux XR10 Knuckle weights to fit Wraith Knuckles
(bought from classifieds)
-DLux No Slop Bushings
-DLux 1/4 wheel spacers
-VP Stage 1 kit
-VP SLW V6 wheels (bought from classifieds)
-R.R. covered battery mount (from Rowdy Racing)
-mini losi springs w/JeepinDoug spring cups
-stock shocks with Traxxas B.B. aluminum caps
-JeepinDoug standoffs
-HH Paired 35T T.M.Pro motors
-CS170 Servo
-Punk Dig RC
-Tekin FXR (de-cased)
-CC BEC
-Spektrum SR300 receiver (de-cased)
-Spektrum DX3C
and some more parts on the way.
-RC4WD Hardened Steel Gear set (front & rear)
-RCBros VP Steering Arms

[motoj550]

My new MANTIS!

[motoj550]

And here's the rest of them.

[W1ck3d0n3]

Well I will throw mine up here too.

Motors- Novak 55t
ESC- Novak M2 Dig
Steering- HITEC HS-645MG
Body- XR10
Links- XR10
Shocks- Axail Aluminum shocks
Rims- Stock XR10 bead locks
Tires- Hot Bodies Sedonas

[Davey]

This was my first XR.

Axial CF everything
Novak M2 and 45T motors
RC4WD gears
VP Links
Axial aluminum Chubs, Knuckles, and Lockouts
Rowdy's batt plate
Hitec 7980 servo
Traxxas Big Bore shocks with Losi springs
Spektrum receiver with Spektrum DX3R transmitter
VP wheel weights
HB Sedona tires
Panther 400 foam
Axial beadlock wheels
Castle Creations 10 amp BEC
VP bushings

[scorpion_ax]

well here is a shot of my smashed switch zero then the new light weight smash at an rtr weight of 4 lbs 0.03 oz's

[ClovisCrawler]

My Zegers RC Graffixx painted Axial BWD Maintis XR-10 CB

[Conflict]

First pic is when I bought it
Second was my first practice build
Last pic is whats to come

[RockKook]

Love to see the RE-RELEASE of the XR10's.....I'd set up 3 more! Let's go Axial!

[ClovisCrawler]

Originally Posted by RockKook

Love to see the RE-RELEASE of the XR10's.....I'd set up 3 more! Let's go Axial!

As I see it the manufacturers can't afford to release full kits. But why not release axle kits. Isn't that all we need? Everyone wants to buy an aftermarket chassis. C'mon Axial!

[RockKook]

Originally Posted by ClovisCrawler

As I see it the manufacturers can't afford to release full kits. But why not release axle kits. Isn't that all we need? Everyone wants to buy an aftermarket chassis. C'mon Axial!

I agree! But.....all the third party guys aren't making more product to support the aftermarket. Vanquish is limited selection....most nothing works in combination or to do a build....chaotic closed their chassis and parts down this month. It sad,because we are all still out here doing it with not much support.

I just got done looking at how to make my own carbon fiber chassis. What does that tell ya?????! I'm not giving up.

[the hang over]

Here is my hoopty.

Xr10 axles
Crawler innovation six shooter wheels
Narrowed white rovers
RcBros executioner chassis
2024 Aluminum links. (These pics are from before I fixed the rear lower ones)
G6 icon shocks
RcBros springs
Jeep and Doug spring cups
Electronics:
2x Holmes hobbies 35 turn hand wound motors
2x Holmes hobbies brxl mini esc's
Sevox 1283 servo
Castle bec
Corona receiver
Futaba 4pk

[B-radNC]

[IMG][/IMG]

[Mudeater67]

Here's my XR10 Comp Rig