my rear axle gears after 10 packs http://i29.servimg.com/u/f29/11/99/05/64/cimg1349.jpg all bearings are ok too :mrgreen: |
Quote:
Greetings Frank |
all stock but i will switch to ceramics and 5x10 for the final driveshaft now |
some pics of the 5x10 flanged bearing mod http://i29.servimg.com/u/f29/11/99/05/64/cimg1350.jpg drilled out to 10mm http://i29.servimg.com/u/f29/11/99/05/64/cimg1351.jpg .2mm grinded off the 36t and .3mm of the top housing http://i29.servimg.com/u/f29/11/99/05/64/cimg1352.jpg stock http://i29.servimg.com/u/f29/11/99/05/64/cimg1353.jpg after grinding http://i29.servimg.com/u/f29/11/99/05/64/cimg1354.jpg fits nice http://i29.servimg.com/u/f29/11/99/05/64/cimg1355.jpg added a .2mm shim between the bearing and the 12t gear http://i29.servimg.com/u/f29/11/99/05/64/cimg1356.jpg and a .2mm shim to the stepped gear http://i29.servimg.com/u/f29/11/99/05/64/cimg1357.jpg all bearings are ceramic abec5 the flanged ones are glued in w. Loctite 638 |
Thats gonna be a tough gearbox! I too have about 10 packs of hard runnin' through my XR and the gears look perfect in mine as well. Front and rear |
got some titanium lowers :mrgreen: http://i29.servimg.com/u/f29/11/99/05/64/cimg1358.jpg and some steering upgrade http://i29.servimg.com/u/f29/11/99/05/64/cimg1359.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1360.jpg switched to the 14mm rotors and 17t pinion in front and 16t for the rear |
Nice....looks good, USA always gives EGRESSor the "thumbsup" 3m with the stock rod ends?? no breakage there yet?? 2345g = around 5.1lbs? You have your hands on a bunch of Ti links?? Could be something good to sell. Everyone loves a Ti link... Any new updates? You must be doing something new. :mrgreen: |
Quote:
i´ve got the Ti links from mattin , the are 6mm in diameter w. 4mm ends the xr10 rodends are drilled out to fit the M4 i will use trx Revo or Jato rodends after the xr10 ones wear out only update for now http://i29.servimg.com/u/f29/11/99/05/64/cimg1361.jpg some bigger rings for the front rims |
just made a set of wheel weights http://i29.servimg.com/u/f29/11/99/05/64/cimg1362.jpg 120 gramm ea. this adds 2 degrees when i climb a board but i think it runs better without the weights |
Video please!!!!! I want to run this motor setup, with m2 or whatever i can for dig. Do you like the brushless on it? Also- I didn't realize it 4 days ago but i askeD about the 7980 as well! Good show man! This oooooooozes sex appeal"thumbsup" |
Quote:
|
Quote:
but works well"thumbsup" i run 2s lipo in that rig and power the servo directly >> endless torque and its damn fast too8) Quote:
|
|
Wow, this is a clean, nicely modified XR10. The tube chassis is so simple, yet pleasing to the eye, and functional. I like it. Everything looks so clean and well built. |
Damn I forgot all about this build. Looking sweet. Got any video's yet? |
18.5t or 21.5t? Also, plenty of power and torque w/ running 2s? |
Quote:
they work great but i will try 3s and 45t brushed with the second pair of axles |
That tuber looks sick....good job there....what are those wheels you are using? are they available for sale? |
Notice any excessive hang-up's from the new steering Tie-rod? Whats the ground clearence on these axles? |
Quote:
switched to 45T brushed and more belly clearance http://i29.servimg.com/u/f29/11/99/05/64/cimg1367.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1368.jpg the 2 fxr´s http://i29.servimg.com/u/f29/11/99/05/64/cimg1369.jpg and the new servo mount http://i29.servimg.com/u/f29/11/99/05/64/cimg1370.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1371.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1372.jpg |
All times are GMT -6. The time now is 09:34 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com