a tuber
 

just a pic of the tube frame for my XR10 axles

http://i29.servimg.com/u/f29/11/99/05/64/cimg1313.jpg

i will post some more within the next days:mrgreen:

Very nice work Christian!

I love tubers.

I want a ti tuber, then the weight is not an issue and the strength is no an issue.

hhmm,

Hello Christian,

you are totally tuber addicted, but consequently "thumbsup"

Greetings Frank

BTW, will call you soon.

First tuber for the XR!

thank you guys"thumbsup"


i used steel tube , 5mm diameter 0.5mm wall , all tig welded

tomorrow?

what I want to see!
 

Here is what the XR10 needs and you are the guy to do it.
#1 New trans plate that can accommodate larger bearings. 5x10x2.5 can handle 3x the load as the 5x8x2.5
#2 high strength gear set along with a new housing end cap that also holds larger bearings.
#3 High strength axles.


If you don't do it, someone else surely will.

I think to add to his list is a clockable servo plate so when the axles are fully clocked the servo isn't leaning forward as bad.

That's cool man I have been wondering how long it would take for the first one to pop up. I allready have plans for my own

the wheels for it

http://i29.servimg.com/u/f29/11/99/05/64/cimg1314.jpg

plates are stainless steel ,3mm
hubs made of 7075 alu
inner ring 6061
outer ring is delrin

not really lightweight but it should work

Actually, wouldn't this be a tvuper :ror:

Sweet wheels "thumbsup"

my hubs are nicer...;-)

http://farm5.static.flickr.com/4150/...0592a099_z.jpg



Greetings

Martin

my hubs are longer:flipoff:

but your lower links are really better
you know my address;-)

Wow those rims look nice very impressive.

progress

http://i29.servimg.com/u/f29/11/99/05/64/cimg1315.jpg


http://i29.servimg.com/u/f29/11/99/05/64/cimg1316.jpg


http://i29.servimg.com/u/f29/11/99/05/64/cimg1317.jpg

hope to get the electronic done within the next 2 hours:mrgreen:

I'm glad someone is still building 2.2 Tubers in the age of the MoonJuice. Good job. "thumbsup"

Hello Christian,

looks great "thumbsup" ...but droop in the front, okay i know you're used to it :mrgreen:

You have to make those wheels available for the public...

Greetings Frank

some soldering is done

http://i29.servimg.com/u/f29/11/99/05/64/cimg1318.jpg


http://i29.servimg.com/u/f29/11/99/05/64/cimg1319.jpg

i will use 2 tekin rs + 2 novak ballistic 17.5 w. 12.5 rotor + 2s lipo

That is fricken gorgeous.

So what you gonna do with the ax????