|
a tuber just a pic of the tube frame for my XR10 axles http://i29.servimg.com/u/f29/11/99/05/64/cimg1313.jpg i will post some more within the next days:mrgreen: |
Very nice work Christian! |
I love tubers. I want a ti tuber, then the weight is not an issue and the strength is no an issue. hhmm, |
Hello Christian, you are totally tuber addicted, but consequently "thumbsup" Greetings Frank BTW, will call you soon. |
First tuber for the XR! |
thank you guys"thumbsup" Quote:
Quote:
|
what I want to see! Here is what the XR10 needs and you are the guy to do it. #1 New trans plate that can accommodate larger bearings. 5x10x2.5 can handle 3x the load as the 5x8x2.5 #2 high strength gear set along with a new housing end cap that also holds larger bearings. #3 High strength axles. If you don't do it, someone else surely will. |
I think to add to his list is a clockable servo plate so when the axles are fully clocked the servo isn't leaning forward as bad. |
That's cool man I have been wondering how long it would take for the first one to pop up. I allready have plans for my own |
the wheels for it http://i29.servimg.com/u/f29/11/99/05/64/cimg1314.jpg plates are stainless steel ,3mm hubs made of 7075 alu inner ring 6061 outer ring is delrin not really lightweight but it should work |
|
Actually, wouldn't this be a tvuper :ror: Sweet wheels "thumbsup" |
|
Quote:
but your lower links are really better you know my address;-) |
Wow those rims look nice very impressive. |
progress http://i29.servimg.com/u/f29/11/99/05/64/cimg1315.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1316.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1317.jpg hope to get the electronic done within the next 2 hours:mrgreen: |
I'm glad someone is still building 2.2 Tubers in the age of the MoonJuice. Good job. "thumbsup" |
Hello Christian, looks great "thumbsup" ...but droop in the front, okay i know you're used to it :mrgreen: You have to make those wheels available for the public... Greetings Frank |
some soldering is done http://i29.servimg.com/u/f29/11/99/05/64/cimg1318.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1319.jpg i will use 2 tekin rs + 2 novak ballistic 17.5 w. 12.5 rotor + 2s lipo |
Quote:
That is fricken gorgeous. So what you gonna do with the ax???? |
I'm curious how the axles will hold up with a brushless system...Be cool to see it running. |
Quote:
|
Quote:
Quote:
but Uli still runs his xr10 with 17.5īs http://www.rccrawler.com/forum/axial-xr10/265497-i%B4m-having-serious-gas.html and it works great |
Pretty truck. Me like. "thumbsup" |
Quote:
|
http://i29.servimg.com/u/f29/11/99/05/64/cimg1320.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1321.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1322.jpg just need to prog the escīs and the react and it needs some panels |
And add your Prototyp knuckels and steering kit on it ... and you need some Ti links It is the cleanest tuber i ever seen Awesome |
Are the front shocks laid back likethat for BTA linkage clearance? |
rats damnit...i just put clean underwear on and then i see this... thanks alot man. sick, cant wait to see this running. i want to know how your brushless does. i am planning on doing something close to but not the same. |
Quote:
|
|
Quote:
The work is most impressive! |
it drives nice just wanted to post some beauty shoots before i start to scratch it:ror: http://i29.servimg.com/u/f29/11/99/05/64/cimg1327.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1328.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1329.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1330.jpg http://i29.servimg.com/u/f29/11/99/05/64/cimg1331.jpg |
I LIKE IT!!! good job |
iīm very impressed after 3 hours of runtime this rig performs damn cool8) i run it without any additional weights http://i29.servimg.com/u/f29/11/99/05/64/cimg1332.jpg it easy climbs steep walls and flies from rock to rock and nothing is broken after alotof hard binds i totally forgot to take some action pics but that was the area http://www.warnemuende-infos.de/foto...r-westmole.jpg |
compliments from Italy!!! The rig is light!..which foams do you use for Boss ? record some videos ;) |
Quote:
Jake sent me some Losi oversize memorys for the front tires and some non memory foams for the rear they work perfect"thumbsup" |
i also bought a set of oversized losi memory but with berg axles and weight addes to wheels they droop too much, now i have on the way a new set of nova foams with memory outer and i plan to reduce weight of my berg axles by lathe.. |
the Losi foams are perfect for my narrow rims , they are 15mm ~.6" between the rings |
i'm curious to see it on the rocks, post one video :) |
| All times are GMT -6. The time now is 02:36 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com