| |
02-26-2011, 11:57 AM
| #1 |
| Rock Crawler  Join Date: Apr 2006 Location: Hartland, MI
Posts: 788
|  VP Hub sizes
What sizes are people running in general, or what would be a "stock" size? I'll probably be running 1" wheels and Sedonas or Boss Claws.
|
|  |
| Sponsored Links | |
| | |
|
02-26-2011, 12:22 PM
| #2 |
| RCC Addict   Join Date: Apr 2008 Location: Sacramento
Posts: 1,210
|
I don't runn either of the tires but I am sure I could, but with Rovers on DH2's up front I run a 585 hub with one spacer removed from the wheel, and in the rear I run a 1" SLW V4's with a 350 hub, I might go to a 460 hub though.
|
|
| |
|
02-26-2011, 12:28 PM
| #3 |
| RCC Addict Join Date: Jan 2009 Location: Crawlifornia
Posts: 1,941
|
Good thread. I am running Dh1's front and rear w/ sedonas. I want narrow!! What hubs should I get for them?
|
|
| |
|
02-26-2011, 12:48 PM
| #4 |
| RCC Addict Join Date: Jul 2009 Location: reelsville
Posts: 1,871
|
On the DH 1's the 335's are about the same as stock, in the rear on DH's you could run the narrowest SLW hub to slim up some. On SLW's 600's are about stock with the 475 being a little slimmer than stock. Seems most with SLW F/R tend to hun narrower hubs (350F/225R). I run DH's with 335 on front and SLW's with 600 rear and plan on switching to 475's on back. |
|
| |
|
02-26-2011, 01:14 PM
| #5 |
| Rock Crawler  Join Date: Sep 2009 Location: dartmouth ns
Posts: 894
|
I'm running 475's on the front and 600's on the rear. I also have Losi hexes and rear width is 10 3/4 " front is right on 11". Hope this helps. Also gained a little more steering. Tires (sedonas) barely touch shocks at full lock  |
|
| |
|
02-26-2011, 01:14 PM
| #6 |
| RCC Addict Join Date: Nov 2004 Location: union
Posts: 1,657
|
slw's front .350 rear .225 |
|
| |
|
02-26-2011, 01:58 PM
| #7 |
| Quarry Creeper Join Date: Nov 2010 Location: Canada
Posts: 383
|
SLW all around 350 front 475 rear remember.... narrower = less room for knuckle weights.. |
|
| |
|
02-26-2011, 02:02 PM
| #8 |
| RCC Addict Join Date: Sep 2006 Location: Depew
Posts: 1,551
|
DHII's with 585's front and back. Right around stock width.
|
|
| |
|
02-26-2011, 02:12 PM
| #9 |
| I wanna be Dave Join Date: Jan 2009 Location: laying low
Posts: 2,508
|
If you plan to run d-lux knuckle weights then you will need 350-475....and more like 475's then 350's...
|
|
| |
|
02-26-2011, 08:49 PM
| #10 |
| Rock Crawler Join Date: Jan 2009 Location: crawlorado
Posts: 555
|
common combos in colorado that i see is 335's with dh1's or 460's for dh2's up front and slws with 475's out back
|
|
| |
|
02-26-2011, 09:12 PM
| #11 |
| Rock Crawler Join Date: Mar 2008 Location: Grand Rapids
Posts: 918
|
i run 350 front 475 rear on .7 v3s front width is about 11.25 out to out and rear 10 7/8 out to out
|
|
| |
|
02-26-2011, 09:51 PM
| #12 |
| Rock Crawler Join Date: Oct 2009 Location: Michigan
Posts: 895
|
All depends on the wheels as to what hubs, I like the DH wheels because you can weight up or down as you like with out ripping down the wheels. For the rocks your gonna run here in Michigan, Sedonas and Rovers work great, Boss claws were the hype over the summer but that faded fast. Most of those guys switched back to Sedonas, seems to be a good choice for the indoor and outdoor courses. The stock wheels can also be narrowed to 1" very easy, check my Albums. After you do this you can run the stock wheels with the VP knuckles. http://www.rccrawler.com/forum/album...id=1510&page=2 Last edited by BLKXJ 96; 02-26-2011 at 10:06 PM. |
|
| |
|
02-26-2011, 10:25 PM
| #13 |
| RCC Addict Join Date: Dec 2007 Location: Rochester Hills
Posts: 1,773
|
I'm running DH 2's w/ 460's up front at 1" wide and v4's w/ 475's in rear at 1" wide. Front track width is 11 1/4" and rear is 10 3/8". Running sedonas with 5.5" C.I. double douces uncut front and rear. Later, Farmer |
|
| |
|
02-27-2011, 01:41 PM
| #14 |
| Quarry Creeper Join Date: Jan 2010 Location: GV
Posts: 286
|
SLWs and .225s all 4 corners.
|
|
| |
|
02-27-2011, 02:01 PM
| #15 | |
| Rock Crawler Join Date: Feb 2009 Location: Milwaukee
Posts: 609
| Quote:
| |
|
| |
|
02-27-2011, 02:30 PM
| #16 |
| RCC Addict Join Date: Aug 2009 Location: Earth?
Posts: 1,698
|
--------------VP hubs------width F-----VP Hub------width R Stock Wheels-----------------11.0--------------------10.2 DH II----------335hub---------11.0----- 460hub-------10.5 DH II----------585hub---------11.5------------------------ SLW v2---------------------------------600hub--------11.1 SLW v3 -------350hub---------11.2------------------------ SLW v3 -------225hub---------10.8----- 225hub---------9.9 -----------------------------------------350hub-------10.25 This info was collected by reading posts by others. Last edited by KBrog; 02-27-2011 at 02:34 PM. |
|
| |
|
02-27-2011, 11:20 PM
| #17 | |
| Rock Stacker Join Date: Sep 2010 Location: Saint Louis
Posts: 65
| Quote:
 | |
|
| |
 |
| |
Linear Mode
