RCCrawler Forums

Gerry · 01-15-2011, 02:44 AM

Every project has an beginning:

Following parts I´ve installed:

XR10 Axles
y-town´s BJ V4
VP Knuckles
VP Lockouts
HR Gearbox
HR motor plates
DNA Rims
and some other Parts made by myself...

Let´s take a look:

with best regards from Austria
Gerry

dude26 · 01-15-2011, 04:58 AM

nice work on the panel !!
can we have a pics of the wheels ??
I'm lookin' for a BWD set

Gerry · 01-24-2011, 12:10 PM

I wanted to use this day to practice for the next Comp...
But last night it´s snowing

.... Well, so I had to do something else at the time going around

I´m even looking for all-round rims and so I made my own wheels... I wanted rims that are right flexible - flexible in terms of width and the offset ...
The wheels are in several sections and consist of following parts:
front and rear ring (Beadlockrings)
2x U-ring - these are the outer rings of the rim , where the tire is threaded middle rings - one ring is 5mm ...

the narrowest rim which I can now assemble measures 10mm and in 5mm increments and then goes upwards

Now i have to take some Vanquish Hex Adapters and then let´s practice!

Greets from Austria,
Gerry

ittybitty · 01-24-2011, 02:31 PM

Good work on the wheels...rig too...lookin good!

limited77 · 01-24-2011, 02:54 PM

Excellent work! Love them.

dude26 · 01-24-2011, 10:54 PM

Gerry · 01-25-2011, 01:00 PM

Thank you guys!

Gerry · 01-29-2011, 04:04 PM

There was a slight change of plan, i have made the Hex Adapter myself...

Then i put the rims at the rig- fits great!
And now it´s time to practice a little bit

Best regards from austria,
Gerry

DiabloCrawler · 01-29-2011, 04:19 PM

Thats a very nice rig......

mint355 · 01-29-2011, 10:03 PM

Those wheels look nice man you got skills.

stelerzman · 01-30-2011, 07:56 AM

nice rig. just to let you know, you will want to ditch the stock upper links. they are way to flexable. i used the 30 degree tube links from axial. much better, no flexing. keep up the great work.

Gerry · 01-30-2011, 08:23 AM

Thank you guys!

Quote:

Originally Posted by stelerzman

nice rig. just to let you know, you will want to ditch the stock upper links. they are way to flexable. i used the 30 degree tube links from axial. much better, no flexing. keep up the great work.

Yeah, i will made next time the upper Links with 8mm Delrin

Gerry · 01-31-2011, 01:23 PM

Last setup settings:

Weight: 2495g (5,5lbs)

Best regards from austria,
Gerry

Gerry · 05-18-2011, 02:12 PM

It´s a little time ago since i´ve posted the last time

But a few little things i´ve changed on my XR10

Chaotic Crawlers Titanium Lower Links
RC4WD Gears
Vanquish motor plates and gear housings
selfmade accu "plattform"
Eric D_Lux Knuckle Weights
and last but not least - some awesome skins from KrawlerKonzepts for the BeetleJuice V4

On friday i drive to Lichtenstein / Balzers to the first SMC Outdoor Comp this year - lets rock the Stones!

Gerry

Gerry · 05-18-2011, 02:15 PM

And another picture of Erics Knuckle Weights:

Harvo · 05-18-2011, 06:15 PM

Still looks great. What is the accu platform?

4xFord · 05-18-2011, 06:18 PM

Im guessing the battery plates he has made. One on the top of the axle a la Rowdy, and one behind the gearbox.

Gerry · 05-18-2011, 11:21 PM

Quote:

Still looks great. What is the accu platform?

Quote:

Originally Posted by 4xFord

Im guessing the battery plates he has made.

Yeah, battery plate is the right word for this what i mean

But the one mounted on the top of the axle is actually not mounted on my xr10, i love the version behind the gearbox/motor

Gerry

01-15-2011, 02:44 AM	#1
Gerry Quarry Creeper Join Date: Jun 2009 Location: Austria Posts: 340	C.s.r. Bj v4 Every project has an beginning: Following parts I´ve installed: XR10 Axles y-town´s BJ V4 VP Knuckles VP Lockouts HR Gearbox HR motor plates DNA Rims and some other Parts made by myself... Let´s take a look: with best regards from Austria Gerry

05-18-2011, 02:12 PM	#14
Gerry Quarry Creeper Join Date: Jun 2009 Location: Austria Posts: 340	It´s a little time ago since i´ve posted the last time But a few little things i´ve changed on my XR10 Chaotic Crawlers Titanium Lower Links RC4WD Gears Vanquish motor plates and gear housings selfmade accu "plattform" Eric D_Lux Knuckle Weights and last but not least - some awesome skins from KrawlerKonzepts for the BeetleJuice V4 On friday i drive to Lichtenstein / Balzers to the first SMC Outdoor Comp this year - lets rock the Stones! Gerry Attached Images

01-15-2011, 04:58 AM	#2
dude26 Rock Crawler Join Date: Oct 2007 Location: south of France Posts: 586	nice work on the panel !! can we have a pics of the wheels ?? I'm lookin' for a BWD set

01-24-2011, 12:10 PM	#3
Gerry Quarry Creeper Join Date: Jun 2009 Location: Austria Posts: 340	I wanted to use this day to practice for the next Comp... But last night it´s snowing .... Well, so I had to do something else at the time going around I´m even looking for all-round rims and so I made my own wheels... I wanted rims that are right flexible - flexible in terms of width and the offset ... The wheels are in several sections and consist of following parts: front and rear ring (Beadlockrings) 2x U-ring - these are the outer rings of the rim , where the tire is threaded middle rings - one ring is 5mm ... the narrowest rim which I can now assemble measures 10mm and in 5mm increments and then goes upwards Now i have to take some Vanquish Hex Adapters and then let´s practice! Greets from Austria, Gerry

01-24-2011, 02:31 PM	#4
ittybitty I wanna be Dave Join Date: Oct 2008 Location: Sumter Posts: 6,141	Good work on the wheels...rig too...lookin good!

01-24-2011, 02:54 PM	#5
limited77 RCC Addict Join Date: Dec 2007 Location: Ward, SC Posts: 1,108	Excellent work! Love them.

01-24-2011, 10:54 PM	#6
dude26 Rock Crawler Join Date: Oct 2007 Location: south of France Posts: 586

01-25-2011, 01:00 PM	#7
Gerry Quarry Creeper Join Date: Jun 2009 Location: Austria Posts: 340	Thank you guys!

01-29-2011, 04:04 PM	#8
Gerry Quarry Creeper Join Date: Jun 2009 Location: Austria Posts: 340	There was a slight change of plan, i have made the Hex Adapter myself... Then i put the rims at the rig- fits great! And now it´s time to practice a little bit Best regards from austria, Gerry

01-29-2011, 04:19 PM	#9
DiabloCrawler Pebble Pounder Join Date: Nov 2008 Location: Portugal, Porto de Mós, PNSAC Crawlers Posts: 137	Thats a very nice rig......

01-29-2011, 10:03 PM	#10
mint355 Pebble Pounder Join Date: Nov 2007 Location: Alice Springs/Australia Posts: 131	Those wheels look nice man you got skills.

01-30-2011, 07:56 AM	#11
stelerzman I wanna be Dave Join Date: Sep 2009 Location: n. palm beach Posts: 4,123	nice rig. just to let you know, you will want to ditch the stock upper links. they are way to flexable. i used the 30 degree tube links from axial. much better, no flexing. keep up the great work.

Sponsored Links

01-31-2011, 01:23 PM	#13
Gerry Quarry Creeper Join Date: Jun 2009 Location: Austria Posts: 340	Last setup settings: Weight: 2495g (5,5lbs) Best regards from austria, Gerry

05-18-2011, 02:15 PM	#15
Gerry Quarry Creeper Join Date: Jun 2009 Location: Austria Posts: 340	And another picture of Erics Knuckle Weights:

05-18-2011, 06:15 PM	#16
Harvo I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind Posts: 6,386	Still looks great. What is the accu platform?

05-18-2011, 06:18 PM	#17
4xFord I wanna be Dave Join Date: Oct 2007 Location: Houston Posts: 3,761	Im guessing the battery plates he has made. One on the top of the axle a la Rowdy, and one behind the gearbox.

RCCrawler Forums

Thread: C.s.r. Bj v4