Gear Options I blew out a 9mm bearing yesterday and the balls took out the final two gears. I have read what people are saying about HR gears and the Axial gears, but I haven't heard anything about the CKRC CNC steel gears yet. So I ordered those. Anyone try them already? I also want to pick up a whole set of Axial gears. I saw where someone besides the testers have them already, but I can't remember who and I can't find the post. Where are you finding the Axials in stock? Thanks. |
|
I have them, they work, I think they are out of round. I dont know how a machined peice can be out of round like this. Oh well Ill run them till they break.:mrgreen: |
RPP has the Axial gears in stock. I believe they have had them for a week or two. |
rpp has the Axial machines gears. the Ckrc geears are hot racing gears, I wouldn't waist the money on those. are you running the Vp cases and motor plate ? and still blew the gear ? |
Rc4wd's will be ready very soon. I beleive these will be the best sets out.... |
The Rc4wd gears are going to be the ticket. I'm waiting on those, have invested in any gears yet. Stocks are holding up well, but want the piece of mind from Rc4wd. |
beating the f-en crap out of my HR's 9mm bearing mod and a bushing for the spool/final gear shaft .....no issues with gears yet |
Quote:
Quote:
|
Last night murderface was running his rig and he has the HR's they dont seem to be any louder then stock. |
I need to get a set of gears myself. I am running both the VP motor plate with the VP transmission cases and I chipped two teeth off the final drive gear spool that is inside the axle casing. The stock gears inside the transmission case had no damage whatsoever though |
Not sure if it contributed, but the long screw in the rear left of the bulk head won't tighten. Plastic is stripped. I'm going to make some new threads out of super glue when it goes back together. |
I broke the 2 final gears when I ran it stock. I ordered stock replacements and went with the VP plates and cases. Its holding up for now but I am not confident at all in the stock gears. I don't want Hot Racing junk, not more Axial junk(even their machined junk), maybe RC4WD, but I am really waiting for the VP chrome moly gears. Those will be the best on the market. |
Quote:
|
HR has horrible machining tolerances. It may work but its not nice stuff. My analogy... putting walmart tires on your Ferarri. You can but why I admit I am faily new to the crawler scene but come from 1/8 nitro racing. HR is feared like Integy there. I am used to Kyosho and Mugen quality. |
Quote:
Now you will get a few machined odd mistakes and HR is very hard to get a hold of. But the cost 1/2 the price of others. But your odds are like 90 to 1 or better. I hear back from maybe one customer a year on a HR Item. Since you coming from 1/8 racing... We are talking about a different kind of abuse. Crawlers don't go 40mph or not even 15mph... Most don't go over 10mph. We deal with a different kind of abuse.... I have ran Clod Tubes, Clod Knuckles, Clod Gears, MRC Knuckles, MRC C-Hubs, MRC Lockers, MRC Tranny Gears, Ax10 Tranny Gears, Ax10 C-Hubs, Ax10 Knuckles, and more... And never had any of these break. I have also sold 1000's of HR items... I pretty sure I have handled much more HR products then most.... Now on the other hand. Anything like Axle Shafts or CVD's... They suck on. The Metal they use doesn't last at all. Integy is about the Same with Crawlers as well. But what do I know... |
I will heed to your experience and believe its not as bad as my analogy.:ror: Budget stuff still has a big place in my RC hobby. I can't afford the best of everything when I want it. So stockers replace stockers until I can afford the good stuff. I just try to avoid buying anything aftermarket twice. Dependability is a huge factory in winning or losing. Average parts can't be trusted to make it to the finish. Especially when you don't drive like a pro. I guess its how serious you take this stuff too. Just for fun, it doesn't matter what your running as long as your still running. |
I run VP plates and Cases, HR Gears, 45t Tekin hand wounds, and 6" CI Sedonas with full weight in my VP wheels, and i have no problems. Just a heads up.... |
Quote:
|
im still waiting on RC4WD to release the gears they have for the XR-10 .... |
All times are GMT -6. The time now is 12:57 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com