4VP V3 MOA Conversion So I was looking at on of my 4VP chassis and thinking that it should be hard to make it usable as an MOA chassis. Well pending testing, there will be a kit available so that you can take your old 4VP v3 Chassis and use it on a MOA type Axle. Here's what it looks like. It will be a really easy MOD: 1: Cut 1/4 inch off each brace to narrow the chassis to 3 inches 2: Use 2 - 36mm braces and 4 11mm spacers on the bottom to mount the lower links. 3: with a dremmel, cut the battery holder and mount it to the two 36mm braces. 4: Use the hood as battery access and mount the ESC, RX, and BEC all dead center in the lower brace. http://i757.photobucket.com/albums/x...3/IMAG0277.jpg http://i757.photobucket.com/albums/x...3/IMAG0278.jpg http://i757.photobucket.com/albums/x...3/IMAG0279.jpg |
That's definitely a cool looking chassis & I'm digging the multitude of mounting holes for....well EVERYTHING!!! Never ceases to amaze me how the slightest little change in shock angle, height, link location etc can COMPLETELY change the handling of a rig. I'm interested to see how it does for ya as an MOA. |
Quote:
|
4VP MOA Conversion Kit Works!!! Well, I'm pleased to announce that the 4VP v3 MOA Conversion works awesome with the XR-10. So in the next few weeks you can expect to see the kit with instructions available so that you can use your 4VP v3 chassis with any MOA type Axle!! To do the conversion you will need to cut 1/4 in off each cross brace and remove the lower front nose cross brace. From the Kit you will get: 1 - Battery Plate/Brace Protector 2 - Counter Sunk 3x8 mm Battery Plate Hardware. 2 - Center Lower link Braces 2 - Lower Link Spacers 4 - 3x25mm lower link hardware Slide in your electronics and off you go!!! Video ----- http://s757.photobucket.com/albums/x...t=3VPv3MOA.mp4 http://i757.photobucket.com/albums/x...3/IMG_9630.jpg |
any updates on this kit? i'm curious if you have done more testing. |
Quote:
It would be done by now but I had to go to an Army MI school for a few weeks. Once I get back I'm going to finish it up and get them roling. If you want to test one out, I'll send one down to you. |
Quote:
|
i just realized i have the v1 of the 4VP chassis. given the updates you've made moving forward to the v3 i'm not sure my v1 would be compatible with an xr10. what do you think? |
All times are GMT -6. The time now is 06:10 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com