Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Heritage Crawlers > Axial XR10
Loading

Notices

Thread: xr10 axle housings

Reply
 
LinkBack Thread Tools Display Modes
Old 04-17-2020, 05:53 AM   #1
Rock Stacker
 
Join Date: Feb 2014
Location: Michigan
Posts: 75
Default xr10 axle housings

hello


i just found a XR10 unbuilt in the box on eBay, the kit was about 90% complete but the axle housings are missing as well as the front motor plate assembly. i am looking for axle housings i can use either a stock housing or replacement after market axles, where do i begin other than eBay. i found the front axle housing but not the rear. any help would be great.
2004DE_JR is offline   Reply With Quote
Sponsored Links
Old 04-17-2020, 06:10 PM   #2
Rock Stacker
 
Join Date: Feb 2014
Location: Michigan
Posts: 75
Default Re: xr10 axle housings

well i guess not a place to post questions to get answers
2004DE_JR is offline   Reply With Quote
Old 04-19-2020, 08:57 AM   #3
Quarry Creeper
 
Join Date: Jun 2010
Location: Elk Grove
Posts: 225
Default Re: xr10 axle housings

Quote:
Originally Posted by 2004DE_JR View Post
well i guess not a place to post questions to get answers
Are you the same guy that posted on the MOA Facebook page? This forum is dead, everyone has moved to Facebook for the most part. This is a good place to look for tech stuff, but don’t expect many answers, especially is a firm for a discontinued RC.
day215 is offline   Reply With Quote
Old 04-19-2020, 09:14 AM   #4
I wanna be Dave
 
Join Date: May 2011
Location: Lost in Oregon
Posts: 4,450
Default Re: xr10 axle housings

Quote:
Originally Posted by 2004DE_JR View Post
well i guess not a place to post questions to get answers
Well you waited all of 17 minutes for a reply

I actually looked to see if I still had one....you might try the wanted forum here
Postclanker is offline   Reply With Quote
Old 04-20-2020, 01:17 PM   #5
Quarry Creeper
 
Join Date: Jun 2010
Location: Elk Grove
Posts: 225
Default Re: xr10 axle housings

Quote:
Originally Posted by Postclanker View Post
Well you waited all of 17 minutes for a reply

I actually looked to see if I still had one....you might try the wanted forum here
Nah, he waited almost 12 hours, but still.....
day215 is offline   Reply With Quote
Old 04-20-2020, 01:18 PM   #6
Quarry Creeper
 
Join Date: Jun 2010
Location: Elk Grove
Posts: 225
Default Re: xr10 axle housings

Quote:
Originally Posted by Postclanker View Post
Well you waited all of 17 minutes for a reply

I actually looked to see if I still had one....you might try the wanted forum here
Nah, he waited almost 12 hours, but still.....

The off handed comments don’t do much to make people want to help.
day215 is offline   Reply With Quote
Old 05-27-2021, 04:41 AM   #7
Hal
Quarry Creeper
 
Join Date: Jan 2016
Location: Southampton
Posts: 254
Default Re: xr10 axle housings

Well I just stumbled upon this thread.... are you still looking? For what it is worth for you or anyone else trying to make a MOA with XR10 axle, they are very hard to get. If you get lucky you may find a LHS with some NOS. They stopped making them some time ago. I found the front axle design is crap anyway. I ended up using 2 rear axles to build mine. The reason you are missing these parts is they are really the only pieces that you use to make a full on comp rig. The gears and internals are all junk. Everybody gets aftermarket chassis and links to make a crawler. Vanquish still makes some c-hubs and knuckles. The 60 axle uses the same ones. Finding the housings is like finding a unicorn. Very rare. If you do locate some get them even if it is to sell later.
Hal is offline   Reply With Quote
Old 07-01-2021, 03:19 PM   #8
Quarry Creeper
 
Join Date: Jun 2008
Location: Portsmouth UK
Posts: 391
Default Re: xr10 axle housings

What didn't you like about the front axle? That's the complete opposite of what most done with the axles. A front casing on the rear gives more clearance and less play in the housing so the gears don't skip.


Quote:
Originally Posted by Hal View Post
Well I just stumbled upon this thread.... are you still looking? For what it is worth for you or anyone else trying to make a MOA with XR10 axle, they are very hard to get. If you get lucky you may find a LHS with some NOS. They stopped making them some time ago. I found the front axle design is crap anyway. I ended up using 2 rear axles to build mine. The reason you are missing these parts is they are really the only pieces that you use to make a full on comp rig. The gears and internals are all junk. Everybody gets aftermarket chassis and links to make a crawler. Vanquish still makes some c-hubs and knuckles. The 60 axle uses the same ones. Finding the housings is like finding a unicorn. Very rare. If you do locate some get them even if it is to sell later.
ruffryder is offline   Reply With Quote
Reply



xr10 axle housings - Similar Threads
Thread Thread Starter Forum Replies Last Post
XR10 Axle Shafts in SCX10 Housings? Tommy R General Crawlers 25 03-22-2012 08:55 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com