Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Heritage Crawlers > Axial XR10
Loading

Notices

Thread: 001 Hulk's Xr10...... nuttin new

Reply
 
LinkBack Thread Tools Display Modes
Old 12-28-2011, 08:15 AM   #1
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Thumbs up 001 Hulk's Xr10...... nuttin new

Well, started playing with the XR10 about a month ago and been hooked like it was crack ever since. I started out and still am a total newb but usually take the fast track. Ill try to post some of my previous pics of what i have done along the way. Hoping to get into comping but have get dialed in with the scene and find out whats going on out there!!! Also building a decent size course i will post pics of as well and open invitation to anyone close enough to drive out and play!!! Any tips from you seasoned veterans would be appreciated. (btw...im a total newbie at forum use as well so any tips there wont offend me either!!!)

dual Tekin fxr's
cheapo 55t for now
VP lockouts
VP motor plates
VP trans housings
RC4WD gears
BWD lower links front and rear
Axial 30° upper links front and rear
VP DH II's 585 hubs
HB Sedonas with custom foam mods
Y town BJ v4 chassis
Rowdy Racing behind the motor electronic/battery tray
Krawler Konceptz skins (on there way)
Hitec 7950 th or something like that (needs Futaba or JR)
CC 10a BEC
Futaba 4pl
Traxxus big bore with mini T springs and jeepin Doug spring cups

Last edited by 001Hulk; 12-31-2011 at 09:32 AM.
001Hulk is offline   Reply With Quote
Sponsored Links
Old 12-28-2011, 08:21 AM   #2
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

This was the car when i started towards the end of November.... Had the Novak M2 dig at the time.
Attached Images
 
001Hulk is offline   Reply With Quote
Old 12-28-2011, 08:57 AM   #3
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

The start of the course..... My first crawler was a Losi NC and then quickly purchased a used semi modified Scorpian only to sell it within a few weeks and ended up buuing a used rtr XR10!! Needless to say the course has changed significantly and early sections have even been completely reconstructed. The main "pit" is still under construction as we speak but hope to be done in the next week or two!!!
Attached Images
   
001Hulk is offline   Reply With Quote
Old 12-28-2011, 09:12 AM   #4
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

My first order of VP bling!!! Wasnt quite sure what I was up against before I tore this thing open(trans gears)!!! I got it figured out shortly and realized the errors of my ways....all seems to be working fine up to this point. Included is a couple shots of its stance after the new chassis and some spring swapping. A few things like the lower links and carbon fiber chassis (after drilling and tapping to 4mm) and electronics plate have already come and gone to the parts pile!!! Evolution is rapid when first starting out in this hobby!!!
Attached Images
    

Last edited by 001Hulk; 12-28-2011 at 11:01 AM.
001Hulk is offline   Reply With Quote
Old 12-28-2011, 11:39 AM   #5
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

So it wasnt long before i got tired of losing those stupid little body clips, and after many hours of struggling on which bodiless chassis to run i thought the Y Town crawlers BJ V4 was the way i would go. I did alot of searching in the clean wiring thread before i chose my layout and preferred wire routing.( probably my 4th soldering job in the last 15 yrs so dont beat me up too bad!!) I went ahead and dove in and didnt do too poorly (at least thats what i told myself) so here is a couple pics of the skid and then the final product!!
Attached Images
    
001Hulk is offline   Reply With Quote
Old 12-28-2011, 12:57 PM   #6
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

Here is a couple of shots on the course with the first test run on the bj chassis!!! I love this thing!!! Major improvements over the previous chassis. Im looking to get in some local comps real soon. Does anyone know of any clubs or comps coming up in the so cal area? Im in Yucca Valley about 40 miles North of Palm Springs. Any help is greatly appreciated, thanks for looking!!
Attached Images
  
001Hulk is offline   Reply With Quote
Old 12-28-2011, 01:56 PM   #7
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

Here is the latest VP bling. Waited forever but my DH pro comp II's with Red rings and 585 hubs showed up along with VP weights and my new HB Sedonas. These wheels are awesome, i had no idea they were "adjustable" as far as wheel width goes and the new offset gives that extra steering throw that ive been missing!!!! Finally no more rubbing on my servo, at full turn they still make contact with the shocks
Attached Images
  

Last edited by 001Hulk; 12-31-2011 at 02:13 PM.
001Hulk is offline   Reply With Quote
Old 12-28-2011, 02:04 PM   #8
RCC Addict
 
Join Date: Oct 2009
Location: Council Bluffs
Posts: 1,238
Default Re: 001 Hulk's Xr10...... nuttin new

lots of progress being made huh. nice looking rig and hope you have fun. heres a link to what may help you find comps in your area
West - California at RCCrawler.com

nice looking test ground too. may want to take some weights out of the rear to make getting up and over verticals a little easier. good luck and get driving =)

Last edited by Kratos; 12-28-2011 at 02:09 PM.
Kratos is offline   Reply With Quote
Old 12-28-2011, 02:05 PM   #9
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

Last but not least by any means is a sneak peak at my skins!!! Krawler Konceptz is awesome!!! Michelle knows what she is doing and is by far the best vendor on RCC that ive delt with yet (no bad experiences with others, just making it a point that her service stands out BIG TIME) just waiting for the real deal to show up now. Wow i brought my entire build up to date during the 2hr drive back and forth between the office and jobsite!!!! Whew....thats way more postin than i planned on. Im always open for tips and pointers!! Feel fre to chime in with suggestions
Attached Images
 

Last edited by 001Hulk; 12-28-2011 at 07:56 PM. Reason: wrong name
001Hulk is offline   Reply With Quote
Old 12-28-2011, 02:13 PM   #10
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

Quote:
Originally Posted by Kratos View Post
lots of progress being made huh. nice looking rig and hope you have fun. heres a link to what may help you find comps in your area
West - California at RCCrawler.com

good luck
Thanks Kratos, thats exactly what i needed!!!
001Hulk is offline   Reply With Quote
Old 12-28-2011, 02:30 PM   #11
RCC Addict
 
Join Date: Oct 2009
Location: Council Bluffs
Posts: 1,238
Default Re: 001 Hulk's Xr10...... nuttin new

your welcome
Kratos is offline   Reply With Quote
Old 12-28-2011, 07:11 PM   #12
Rock Crawler
 
losiking1's Avatar
 
Join Date: Sep 2009
Location: dartmouth ns
Posts: 894
Default Re: 001 Hulk's Xr10...... nuttin new

Truck and course both look great man.
losiking1 is offline   Reply With Quote
Old 12-28-2011, 07:15 PM   #13
I wanna be Dave
 
Join Date: Sep 2009
Location: Eastcoast CANADA
Posts: 4,395
Default Re: 001 Hulk's Xr10...... nuttin new

Quote:
Originally Posted by 001Hulk View Post
Last but not least by any means is a sneak peak at my skins!!! Kustom Krawlers is awesome!!! Michelle knows what she is doing and is by far the best vendor on RCC that ive delt with yet (no bad experiences with others, just making it a point that her service stands out BIG TIME) just waiting for the real deal to show up now. Wow i brought my entire build up to date during the 2hr drive back and forth between the office and jobsite!!!! Whew....thats way more postin than i planned on. Im always open for tips and pointers!! Feel fre to chime in with suggestions
Hint...Its krawler Konceptz
I love the area you have for a course..just a tad jealous
Thanks for Props on our service
Krawler Konceptz is offline   Reply With Quote
Old 12-28-2011, 08:01 PM   #14
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

Quote:
Originally Posted by Krawler Konceptz View Post
Hint...Its krawler Konceptz
I love the area you have for a course..just a tad jealous
Thanks for Props on our service
SORRY I know the difference, I was riding with my work partner and talking crawlers while I was typing and made a BOO BOO. I already edited it
001Hulk is offline   Reply With Quote
Old 12-29-2011, 06:09 PM   #15
I wanna be Dave
 
Join Date: Sep 2009
Location: Eastcoast CANADA
Posts: 4,395
Default Re: 001 Hulk's Xr10...... nuttin new

Still jealous of your course!
Krawler Konceptz is offline   Reply With Quote
Old 12-29-2011, 06:19 PM   #16
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

Just wait until I post some of the bigger pics once I finish the big pit!!!!
As my idol Joe Dirt would say " You should see my RC course, You'd shit yourself"
001Hulk is offline   Reply With Quote
Old 12-30-2011, 11:58 PM   #17
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

I opened the mail box today and found some goodies!!! First up was the Rowdy Racing behind the motor electronics/battery plate excellent product as expected. I definately had less room than i thought which meant some unexpected shifting around was in order. Luckily the second thing in the mail box were some used 3s batteries I ordered off the classifieds. Of course only one of four fit like I had hoped .After turning the skid 180° and taking a" hot wire" to the longer end of the tounge now in the rear, I managed to fold it straight up and use it as the new back support for my reciever and bec. Lastly I adjusted the front upper links for more battery clearance at full compression and turned the front lower links upside down to help act as skids to hopefully keep the battery from draging as much. By the time I had finished it was already dark so we will have to see how everything handles tommorow. Ill try to snag a few more pics on the course.
Attached Images
    

Last edited by 001Hulk; 12-31-2011 at 12:10 AM.
001Hulk is offline   Reply With Quote
Old 12-31-2011, 12:06 AM   #18
Pebble Pounder
 
Join Date: Nov 2011
Location: Yucca Valley
Posts: 123
Default Re: 001 Hulk's Xr10...... nuttin new

I almost forgot the third thing in my mail box were my BWD motor guards, also sweet product as expected I think im gonna hold off and save them for when I order some new HH 35T motors. Once I get those Ill cut some vent holes accordingly and install, until then Ill have to get by on the good old recycled 5hr energy bottles
Attached Images
 

Last edited by 001Hulk; 12-31-2011 at 12:11 AM.
001Hulk is offline   Reply With Quote
Old 12-31-2011, 11:06 AM   #19
Quarry Creeper
 
Join Date: Oct 2008
Location: Stink Grove
Posts: 403
Default Re: 001 Hulk's Xr10...... nuttin new

Whats up with the tree on your keyboard
samdog is offline   Reply With Quote
Old 12-31-2011, 11:40 AM   #20
Rock Crawler
 
Join Date: Aug 2010
Location: Socal
Posts: 699
Default Re: 001 Hulk's Xr10...... nuttin new

Most of the Socal Comps are held in and around Apple Valley. So not too far from you.


Here is a link to the Socal Forum. 2012 Comp schedule is not up yet but if you look there is a thread that maps all the comp sites.
SoCal RC Rock Crawlers - SoCal's Premier RC Rock Crawling Site!

Good work on the crawler, and definitely looking forward to seeing more progress on the course. I like the incorporation of the slide

-Trent

Last edited by dstrbd1; 12-31-2011 at 02:32 PM.
dstrbd1 is offline   Reply With Quote
Reply



001 Hulk's Xr10...... nuttin new - Similar Threads
Thread Thread Starter Forum Replies Last Post
Project 'nuttin special norcallump 2.2 Scale Rigs 10 07-13-2011 09:59 AM
Micro F-Toy #001 revoracer99 Losi Micro-Rock Crawler 9 03-31-2010 11:26 PM
SW2 build-up #1,000,001 MongoDS Tamiya TLT Crawlers 6 02-13-2006 06:19 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:23 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com