RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial XR10 (http://www.rccrawler.com/forum/axial-xr10/)
-   -   Upgrading whats next. (http://www.rccrawler.com/forum/axial-xr10/372279-upgrading-whats-next.html)

Waitin4Dv@Yahoo.com 03-12-2012 11:19 PM

Upgrading whats next.
 
5 Attachment(s)
Im looking to keep upgrading my xr10 . Where should i begin next and there is no budget limit.

dude26 03-12-2012 11:48 PM

Re: Upgrading whats next.
 
new motor and new ESC ;-)

Rob450FE 03-13-2012 12:05 AM

Re: Upgrading whats next.
 
Flip that servo and clock your c's back, @ no expence too!:mrgreen:

I run the same ESC but different motors, it does need to go as dude26 says. The Novak glitch is a bitch:flipoff: Mine will be gone once I stop spending money on other parts I need/want/need. Lol

Gears/bearings is a must if you don't have em already. I run Rc4WD with VP plates and cases. Anything VP is a good idea"thumbsup""thumbsup" Especially if your not worried about cost. LMFAO!

What about weights??

norcrawler 03-13-2012 02:53 AM

Re: Upgrading whats next.
 
if that was mine.

some nice .7 wheels.
ditch the chisles and get some rovers.
flip the shocks
flip the servo and get a real servo horn:flipoff: also make a nice servo to arm link with revo/jato rod end.
ditch the stock ti rod setup and run a straight
vp knuckles. stock c's will be fine for now.
get some nice 35-45t handwound motors/fxr's
vp cases/plates with rc4wd gears. (plates and gears at a minimum)
also, i highly recommend putting the 3mm brass inserts throughout both the axles when you have them torn down. Thread Inserts for Plastic by E-Z LOK

skys the limit really, damn this shit adds up quick haha

Waitin4Dv@Yahoo.com 03-13-2012 12:19 PM

Re: Upgrading whats next.
 
What do u mean flip the shocks. And whats a topline motor I can run. I just re did the gears in the servo. They all stripped. Does vanquished have a whole sterring set up for the xr10 or do you guys come up with your own ideas. If you can piont me in the right place where to by these things and maybe the part numbr. Or someone that I csn call that actually deals with rock crwlers my stores all seem very unhelpful whrn it comes to srrious crawling stuff

norcrawler 03-13-2012 12:53 PM

Re: Upgrading whats next.
 
flip em and keep the wieght down low. not that big of a deal but really easy.
HH or team brood motors?
i think vp has the link for steering. you just gotta cut out the stock shit.
theres alot of info on here. a quick search will come up with alot of stuff


All times are GMT -6. The time now is 03:40 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com