M_ENERGY's -- Remedy 3.5
 

Well after crawling a T1E rig for a couple years I was wanting something different and my own kinda unique spin on things and with the new rules that were released a few months ago I decided to start drawing a chassis :twisted:

I teamed up with BmachinesRC to cut the chassis and I have tested and tweaked a few versions and now I am really pleased with were it is now

SPECS:
Carbon Fiber Remedy 3.5 chassis
Built VP axles (of course)
Dual micro sidewinders
A pair of Ruby Reds BROOD
Hitec 7950
DE Racing wheels VP hubs
SLW stage 3 lightening
T1E carbon wheels
Voodoos silver narrowed (two rows)
6" double deuce foams
7075 Links
Egressor shocks with Silvers all 4
35wt oil with stock pistons

Front shocks eye to eye
Extended 3.350"
Compressed 2.600"

Rear shocks eye to eye
Extended 3.200"
Compressed 2.650"

I will be posting pics in a little bit and getting this party started :mrgreen:

Re: M_ENERGY's -- Remedy 3.5
 

Looking forward to seeing how this goes"thumbsup"

Re: M_ENERGY's -- Remedy 3.5
 

I've watched this rig progress over a few stages. It works really well and has TONS of ground clearance "thumbsup"

Re: M_ENERGY's -- Remedy 3.5
 

I think you will enjoy it and you will get to see it at Battlegrounds "thumbsup"

Yes indeed it does have ground clearance and still a low cog ....not to mention a first place finish last weekend *cough*cough* "thumbsup"

Re: M_ENERGY's -- Remedy 3.5
 

And then .....






























Where are the pics :mrgreen:

Re: M_ENERGY's -- Remedy 3.5
 

Patience :mrgreen:

Here is the current setup and will be getting a pair of Bmachines frame sliders and I will snap pics to show them off as well "thumbsup"

Full droop
http://i1187.photobucket.com/albums/...ps45e65358.jpg

Fully compressed
http://i1187.photobucket.com/albums/...ps27d3f497.jpg

Re: M_ENERGY's -- Remedy 3.5
 

Tomorrow I will show some pics as to why the rear uppers can travel up through the back of the cab :twisted: just another one of Bmachines goodies "thumbsup"

Re: M_ENERGY's -- Remedy 3.5
 

where can we find one of these crazy chassis's?

Re: M_ENERGY's -- Remedy 3.5
 

might have a few available at battlegrounds "thumbsup"

Looks great


Sssshhhh

Re: M_ENERGY's -- Remedy 3.5
 

liked.. chassis look tiny and tons of clearance....

Re: M_ENERGY's -- Remedy 3.5
 

Man those rear shocks are FLAT!

Re: M_ENERGY's -- Remedy 3.5
 

Here are some dimensions of the last two pics. I will get some more angles of the rig this afternoon "thumbsup" maybe some pics on the rocks :twisted:

http://i1187.photobucket.com/albums/...ps6af2a215.jpg

http://i1187.photobucket.com/albums/...ps747b609e.jpg

Re: M_ENERGY's -- Remedy 3.5
 

Yep the rear shocks lay down pretty good, but with some limiting/tuning works great helps keep cog even lower "thumbsup" it kinda seems to be phasing into that a little with some of the other chassis i.e. The DD and BWD nightmare's laid down some too "thumbsup"

Re: M_ENERGY's -- Remedy 3.5
 

Gotta love using Paint (or Mac equivalent) for illustrations "thumbsup"

Don't you have a pic of the assembled chassis by itself?

Re: M_ENERGY's -- Remedy 3.5
 

Is the chassis 8" long?

Re: M_ENERGY's -- Remedy 3.5
 

And how many square inches is that side panel? When i draw a 3.5 square inch panel in cad on my chassis it looks way bigger than that. Maybe It's just the different shape.

Re: M_ENERGY's -- Remedy 3.5
 

I actually used the edit in photobucket :) and no I don't have a pic b/c I assembled it approximately 6hrs before the comp 8)

Yes its 8" long

Yes the panel is over 3.5 sq in and meets the 2 dimensions (length and width) greater than 1" "thumbsup"

Re: M_ENERGY's -- Remedy 3.5
 

Cool, scaling off the other dimensions you show it looked short is the only reason I asked. "thumbsup"

Looking forward to checking it out at BG.

Re: M_ENERGY's -- Remedy 3.5
 

The chassis ends so far in front of the rear motor that it looks really short. Cool chassis for sure.