re: ZZR's...now it's a REMEDY 3.5 Quote:
Quote:
We will see us in France and if you want you could try to get some rocks with my lightweight one more time. Quote:
The nice Steering and the reduced weight at the rear is great!!!...with the 500' pullers and the skinny rovers he is really light at.the rear. I hope to get the right Setup the next days. Quote:
Quote:
|
Hi, nice build. I am just curious are the blue screws on the rear axle .5mm pitch. If so, do you have to do the brass insert mod? Thanks, |
re: ZZR's...now it's a REMEDY 3.5 Quote:
|
Hi, I am curious where you buy the brass slide bearing in 5x8x2.5mm? Thanks, |
re: ZZR's...now it's a REMEDY 3.5 Quote:
|
re: ZZR's...now it's a REMEDY 3.5 Congratulations Stephan for podium place at BIG-13 "thumbsup" How does the skinny rovers work at french rock? |
re: ZZR's...now it's a REMEDY 3.5 good job my friend for your 3th place at the french nats |
@laalaa - thank you lasse. I would like to tell you that I went with the skinny rovers. Sorry, but at the moment I felt safer with the Bossclaws. For this reason, I was also on the start with the losi's. Perhaps at the next comp i will try again. @yzik - thx, my friend - hope to see you soon @TC94 - Sorry, that i could't find time at the end to have a look at your setup. If you have any question, please write PN or ask here. i will answer as fast as i can. ...yes, at the last weekend i'm able to take the 3rd at the second biggest comp in europe - the nats in france - called the BIG. Before i i went to france i changed my setup complete for better sidehilling and better control in every situation...and it works fine for me. http://img.tapatalk.com/d/13/08/01/e4agy3av.jpg http://img.tapatalk.com/d/13/08/01/agumudup.jpg http://img.tapatalk.com/d/13/08/01/e2ynydy7.jpg Setup: I did made 8mm inner limiter inside the dumpers in Front - 8cm or 3,15" from eye to eye http://img.tapatalk.com/d/13/08/01/8emure3u.jpg and outside limiter also http://img.tapatalk.com/d/13/08/01/8egamy6e.jpg At the rear i did not use inner limiter. They have 9.5cm or 3,74" from eye to eye http://img.tapatalk.com/d/13/08/01/udamedub.jpg i changed the position of the rear dumpers. http://img.tapatalk.com/d/13/08/01/yzare3ud.jpg and now i use the special quick comp outer limiter from my friend "fritzthefly". If i now need more clearence i could put them out in 2 seconds. The only thing i have to do is to go back one hole before. http://img.tapatalk.com/d/13/08/01/bunejyry.jpg With this setup it's : Minimum - 4,5cm or 1,77" http://img.tapatalk.com/d/13/08/01/4aze6uze.jpg Driving - 7,0cm or 2,76" http://img.tapatalk.com/d/13/08/01/quqype7e.jpg Maximum 8,5cm or 3,35" or without quick limiters and hole changing 8,9cm or 3,5" http://img.tapatalk.com/d/13/08/01/suhuzu7u.jpg @hittman...i think with Voodoo's it will be fine...if you need other pictures or perhaps a Video, please tell me http://img.tapatalk.com/d/13/08/01/e6u6y6aj.jpg now only some impressions of the last weekend and let me say that i love the BIG so much. I think it's the coolest comp in europe with a great nature and really friendly and open mind people and a lot of new friends. I will come back next year...that's for shure... http://img.tapatalk.com/d/13/08/01/qybypa3y.jpg http://img.tapatalk.com/d/13/08/01/ty3ane8u.jpg http://img.tapatalk.com/d/13/08/01/y5u9y7ad.jpg http://img.tapatalk.com/d/13/08/01/6ehaduga.jpg http://img.tapatalk.com/d/13/08/01/3evenu5a.jpg |
re: ZZR's...now it's a REMEDY 3.5 Looking real good. I like the mods to the shocks. Perhaps you could post a pic of the rig upside down? Thanks! Edit: Congrats on the 3rd place finish as well"thumbsup" |
re: ZZR's...now it's a REMEDY 3.5 Congratz Stephan for yet another good position! Next year I'm coming to France as well. Fact this time. "thumbsup" |
re: ZZR's...now it's a REMEDY 3.5 If you get a chance would you ask you friend what shocks those caps came from? Thanks in advance! |
@Zarizi Tech - thx a lot. Good to here that we will see us at the nats of france, Samu! Then it will be even more exciting when the top riders from Finland also play in france with us. The good thing is, that I have some time to be better for these competion in 2014. I'm Very excited about, what the finnish team could achieve at the nats of USA 2013... @Nigels_world - the caps are from the HSP-Kulakcrawler. The friend of mine who did made them has taken the square case and turned around. Then he turned discs through which the rodend is screwed. Thereafter, the disc is inserted into the cap. In order to make this mod, you have good machines and corresponding experience need. Timo is in my country one of the best bergaxels builder. http://img.tapatalk.com/d/13/08/02/e7u4y7yn.jpg @hittman - big thx to you, too!!I am very pleased that there is also a top driver like you, who like what we do in europe! Sorry, but I regret to tell you that you can not drive on the head with my setup and the old school bossclaws. I tried some minutes before in the kitchen. With the Vooodoos it should go. If you want i could test it with the voodoo's of a friend of mine in two weeks. I am very curious where it will go... Here is the pic you want http://img.tapatalk.com/d/13/08/02/e6yhazym.jpg http://img.tapatalk.com/d/13/08/02/9e3egape.jpg http://img.tapatalk.com/d/13/08/02/ugyqyseh.jpg |
re: ZZR's...now it's a REMEDY 3.5 Thanks for the info on the shocks. I do have the equipment to do it but who knows if ill ever actually attempt it. Good tech either way. Why didn't you use the cap as is with the included rod end? |
re: ZZR's...now it's a REMEDY 3.5 Quote:
It looks very close when upside down though. I think like we talked about with Voodoo's, it won't be a problem at all. Thanks for posting more pics. It showed me exactly what I wanted to see"thumbsup" |
re: ZZR's...now it's a REMEDY 3.5 <object width="560" height="315"><param name="movie" value="//www.youtube.com/v/ICo8lF8hn3Y?hl=de_DE&version=3"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/ICo8lF8hn3Y?hl=de_DE&version=3" type="application/x-shockwave-flash" width="560" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object> mobile version ;-) |
re: ZZR's...now it's a REMEDY 3.5 My very good friend pilot NICE"thumbsup""thumbsup""thumbsup" |
re: ZZR's...now it's a REMEDY 3.5 hey , you are a freestyler driver nice video , thanks congratulation for the BIG "thumbsup" |
re: ZZR's...now it's a REMEDY 3.5 Quote:
No problems. I am very happy to meet you. And congratulations for the 3rd place. Sunday was a little speed. I read all about you thread and I copied. ;-) See you soon and thank you again. Thierry |
re: ZZR's...now it's a REMEDY 3.5 @fritzthefly - It's a nice video, but what who was the lousy driver who pushes gate after gate, although Fred says exactly what he have to do. Perhaps he is deaf or simple a little bit stupid. The DNF he therefore fully deserves. What i'm learning is...always trust your rig and friendly french drivers... Quote:
Quote:
Quote:
|
Only a little update, but importend for me...some nice parts to make the rig stiffer an no more bend hardware if the reptile should fall times higher. Since i changed to the reptile i thought i have to install parts like that to make it stronger for the harder falls. Here they are... http://img.tapatalk.com/d/13/08/17/yvebyhab.jpg http://img.tapatalk.com/d/13/08/17/7abunudu.jpg |
All times are GMT -6. The time now is 12:25 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com