ZZR's...now it's a REMEDY 3.5
 

Hello guys,

i would like to show you the brand new chassie CK Reptile which i got one week before the biggest comp in Europa "Supercrawl 2013" started.

it was certainly a big risk to change the chassie yet so close to the most important event in our country, but it has worked so well from the first minute that I just had to try...And it works - i'm able to make the 5. after quali and the 7. after shotout in final.


the most important is the slightly elevated Skidplatte but in practice some brint. You can go low and still has the ground clearance that you sometimes can not compensate by technology.

Inside the rig are:
micro sidewinder
team brood KR 30t motors - team edition
NCD - nuckle weight system
homemade titanaxle made from a friend in the rear
hitec 7950
Homemade Carbon gearplates made from a friend
Homemade lightweight hubs made from a friend


now i'm still looking forward for some new wheels from Nordic Crawler Design and 500 Puller´s from Mr. Holmes

http://img.tapatalk.com/d/13/05/23/ebapyra7.jpg

http://img.tapatalk.com/d/13/05/23/hu5ajuty.jpg

http://img.tapatalk.com/d/13/05/23/qasa3y7u.jpg

http://img.tapatalk.com/d/13/05/23/se5uragu.jpg

http://img.tapatalk.com/d/13/05/23/y5udasah.jpg

http://img.tapatalk.com/d/13/05/23/ra6ybunu.jpg

http://img.tapatalk.com/d/13/05/23/emazebeg.jpg






Some pics from the Supercrawl 2013
http://img.tapatalk.com/d/13/05/23/epasysa6.jpg

http://img.tapatalk.com/d/13/05/23/egyja4a9.jpg

http://img.tapatalk.com/d/13/05/23/haqe6abu.jpg

http://img.tapatalk.com/d/13/05/23/y2emaqu9.jpg

http://img.tapatalk.com/d/13/05/23/5u8u8yde.jpg

http://img.tapatalk.com/d/13/05/23/uva2edy9.jpg









http://img.tapatalk.com/d/13/05/23/epu4anub.jpg

http://img.tapatalk.com/d/13/05/23/5ytahy3u.jpg

http://img.tapatalk.com/d/13/05/23/qu9egu7e.jpg

http://img.tapatalk.com/d/13/05/23/nenupery.jpg

http://img.tapatalk.com/d/13/05/23/y5aheryd.jpg

http://img.tapatalk.com/d/13/05/23/ujuqyten.jpg


...hope you like...if you want to now anything ask me...


Stephan

re: ZZR's...now it's a REMEDY 3.5
 

Hi Stephan.

What rear shocks are you running? It looks similar to SCX10 but the shock caps are different...

re: ZZR's...now it's a REMEDY 3.5
 

What front axels are those?

re: ZZR's...now it's a REMEDY 3.5
 

Cool collection of pics. Chassis looks like shes workin well for ya.

x2 on the shock caps. Im assuming the same cat that made your axles maybe turned out some nice aluminum caps for the SCX bodies?

JD

@curcal
It's SDS 300 HD's with 70 degree

@rofu
Hi Team Sweden - that's the EGRESSor houses - they are dry and not licking like the SCX dampers

@HARDKNOCKZ
Thx and nice that you like. Yes the chassie works great for me.The caps are from cheap set of dampers. A friend of Mine modified them for me, but i don't know the Name now - i can't remember. If you want to know I will ask him for you.

I have these cap on the damper to compensate the mass. Otherwise he would not be very steep rear mounted high enough or the dampers have to stand precipitously, but i don't like these.


The cheap shocks
http://img.tapatalk.com/d/13/05/25/6a2y8aga.jpg

http://img.tapatalk.com/d/13/05/25/age7asuz.jpg

http://img.tapatalk.com/d/13/05/25/usuryvaq.jpg

http://img.tapatalk.com/d/13/05/25/9anyta8a.jpg

re: ZZR's...now it's a REMEDY 3.5
 

some News - MT4 Special & Brassspacer for the front
perhaps for better rollover...we will see...

testrun with MT4 Special
<object width="560" height="315"><param name="movie" value="//www.youtube.com/v/Oz-lvupFPwo?version=3&amp;hl=de_DE"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/Oz-lvupFPwo?version=3&amp;hl=de_DE" type="application/x-shockwave-flash" width="560" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>

mobile version
<iframe width="560" height="315" src="//www.youtube.com/embed/Oz-lvupFPwo" frameborder="0" allowfullscreen></iframe>
Reptile & MT4 - Spezialmod - YouTube







.

Got some nice parts from Tomi of NCD - thx a lot for the great work, Tomi!!



http://img.tapatalk.com/d/13/06/09/evyse7ad.jpg

and put together with new blue anodized titansrews
http://img.tapatalk.com/d/13/06/09/atagapan.jpg

For the rear i ordered 1.5mm...if i change to alu - 10g
http://img.tapatalk.com/d/13/06/09/9e3a6era.jpg

For the front 2.0
http://img.tapatalk.com/d/13/06/09/a2y3yta5.jpg

re: ZZR's...now it's a REMEDY 3.5
 

here are some impressions how the reptil works

<object width="560" height="315"><param name="movie" value="//www.youtube.com/v/ztzf2QJ-Sz4?hl=de_DE&amp;version=3"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/ztzf2QJ-Sz4?hl=de_DE&amp;version=3" type="application/x-shockwave-flash" width="560" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>


mobile version
<iframe width="560" height="315" src="//www.youtube.com/embed/ztzf2QJ-Sz4" frameborder="0" allowfullscreen></iframe>
Reptileafterworkcrawl - YouTube
.
.
.
.
.

re: ZZR's...now it's a REMEDY 3.5
 

I'm curios to see how well the three post point mounting will hold up, I've seen four but not three. Also curious how it effects your foams!

re: ZZR's...now it's a REMEDY 3.5
 

you must´t wonder about the three spacer. A lot of my friends and myself use the three spacer system since half to one year or longer and there is no differenz to feel to 4, 5 or 6 and no effect to the foams as well. Bevor i used this system i thought the same like you think now, but nothing happens...only lighter...

But i´m curios by myself about the 1.5mm slices at the rear...if they will brake i have to change to the 2.0. that´s the reason why i ordered 2 slices of 2.0 extra from tomy.

Where are you getting the titanium hardware?

re: ZZR's...now it's a REMEDY 3.5
 

hey can you get this in the US

re: ZZR's...now it's a REMEDY 3.5
 

love the look of your rig!

amassing

congratulations

re: ZZR's...now it's a REMEDY 3.5
 

Hi Stefan !! That was still an immense pleasure of meeting you in SuperCrawl. Congratulations for your good performance "thumbsup" the conditions weather were not very good and rocks very slipping :evil:

re: ZZR's...now it's a REMEDY 3.5
 

1.5mm is ok for Wheels.... i run 1/16" for over 2 years on my , and for 1 Year on my Superclass.....

I think in the German Crawl spots there is no Problem with a 3 Bar, but in the high mountains and in some of the US Spots i know, they won't hold up longtime after a tumble down ..... a tumble down can also kill VP wheels.... remember Vegas 2011......

i`m at 20g with a 5bar wheel 3 piece designe and VP 475 hub mounted on with all screws and i think i can loose another 1-2 g on each wheel with my new standoffs

re: ZZR's...now it's a REMEDY 3.5
 

perhaps here you could buy. Write a e-mail to the company and ask how much to order for shipping to USA. Perhaps you will have luck, but normally he only sent to europe. But try...
Perhaps you need ceramic ball beaarings also, because he is specialized in bearings and the cheapest one i know, two(in europe and perhaps in the world:ror:).

the webside is: www.rcbay.de

thank you very much"thumbsup"i´m really pleased to hear that:D



the same compliment to you my friend, stefane!! hope to see you at the nationals in france once again...i think we will come "thumbsup"
and i also hope for better weather - not the same like at supercrawl:roll:


thx manu for the info - looking forward to see you in france to"thumbsup"

re: ZZR's...now it's a REMEDY 3.5
 

Your rig look extremely light and well balanced when you jump around in the afterworkvideo:)
What is your weight RTR?

BTW, I found a Reptile in the Crawlerkeller candy store at Supercrawl. Hope to finish it soon:)

re: ZZR's...now it's a REMEDY 3.5
 

BTW, I found a Reptile in the Crawlerkeller candy store at Supercrawl. Hope to finish it soon:)[/QUOTE]
very good choice, Team Sweden:)..the higher and shorter skidplate is really good. In the video i´m not able to drive five of the scenes with my old rig...with the Reptile now it´s possible...little differenz, but maximum effect







[QUOTE=rofo;4360282]Your rig look extremely light and well balanced when you jump around in the afterworkvideo:)
What is your weight RTR?




ist´s not really extremely light, but good balanced for my drivingstyle. In the video i drove:

1688 g
+110 g for both side nuckleweights
+44 g Aku
=1842g

with the new NCD-Wheels it´s
1810 g RTR


...but today i got some thing to go to the next level and about 90-100g will falling down:twisted:

Here they are...big thank's to John for these great work

http://img.tapatalk.com/d/13/06/14/uryhemam.jpg

http://img.tapatalk.com/d/13/06/14/avadazav.jpg

http://img.tapatalk.com/d/13/06/14/y8a9etup.jpg

http://img.tapatalk.com/d/13/06/14/5u8yjyse.jpg

http://img.tapatalk.com/d/13/06/14/yqezy5ej.jpg

re: ZZR's...now it's a REMEDY 3.5
 

Nice Motors.Hope I get my Puller500 soon