Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Heritage Crawlers > Axial XR10
Loading

Notices

Thread: A Rebirth Of Cast Offs

Reply
 
LinkBack Thread Tools Display Modes
Old 10-29-2013, 10:46 AM   #1
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default A Rebirth Of Cast Offs on Chaotic Smash

As much as this is a new build for me I am sure that there are several people out there that will recognize the vast majority of what is going in it as they used to own it. In a twisted way I may have helped fund some of the other builds going on right now, kinda ironic.

After a ton of reading and a bunch of questions (thanks to those who took their time and answered them for me) I started collecting parts from the classifieds here and since the bulk of what I have purchased is here and some what test fit I figure that it was time to throw it all together.

What better time to do so than during a contest like this. Awsome contest BTW thanks for the opportunity to be a part of it.

There is no place to comp the thing any where around here, closest is a 6 hour drive away so the rig may not be a show stopper but it should be very competent none the less.

I will need to tear it all down now at this point and reassemble paying attention to loctite and proper length hardware as a final build. At this point it is all just in a test fit situation as the parts and pieces were arriving. I will post pics during the reassembly and I am still waiting on a couple things to actually have it finished.

I will post the specs for the time being with pics to follow.


Specs



***Change of Chassis***

Chaotic 2.2 Switch Smash chassis
Chaotic Switch 2.0 & Smash Suspension Links
Dlux Fab Titanium Link Sliders
Revo 4mm Rod Ends




Front Axle

XR10 Axle
RC4WD Hardened gears
Big Bearing Modded Motor Plate (bought in classifieds)
VP Trans Case (bought in classifieds)
Vp C Hubs (bought in classifieds)
Vp Wraith Knuckles (bought in classifieds)
VP Link Mount With Bushing (bought in classifieds)
VP Servo Armor (bought in classifieds)
RR Battery Mount (bought in classifieds)
RR Electronics Mount (bought in classifieds)
Home Fab Steering Arms
Home Fab Steering Link
Novak 45t Hand Wound (bought in classifieds)
OR
Team Brood 35t 4 Mag Can Motors Not sure of model (bought in classifieds)
Custom Fiber Motor Guard
RCBros Knuckle Weight Holders (bought RCBros believe it or not)
RCBros Knuckle Weights (bought RCBros believe it or not)



Rear Axle

XR10 Axle
RC4WD Hardened gears
Big Bearing Modded Motor Plate (bought in classifieds)
VP Trans Case (bought in classifieds)
VP Rear Link Mount (Finally Found One)
Axial Lockouts (bought in classifieds)
2 Bolt Mod Done
Novak 45t Hand Wound (bought in classifieds)
OR
Team Brood 35t 4 Mag Can Motors Not sure of model (bought in classifieds)
Custom Fiber Motor Guard
(Found The Dam Link Mount )

Shocks

Axial SCX shocks (New believe it or not)
Jeepindoug spring cups (from Wicked Wolf RC)
Losi MRC Pro silver Springs (New believe it or not)


Wheels

VP SLW V6 1" (bought in classifieds)
VP SLW V1 1" (bought in classifieds)
SLW Hubs 600's ,725's and 475's (bought in classifieds)

Tires

4 X VooDoo Blue Compound Pins cut as per recomendations (new) (bought in classifieds)
2 X VooDoo Silver Compound (Freebie From Chaotic and Ottsix)
CI DD foams 5.5 soft outer fronts (new) (bought in classifieds)
CI DD foams 5.5 med outer rears (new) (bought in classifieds)

Electronics

2 x Micro Sidewinders smashed by me
CC BEC in smash straight to servo
Savox sa-1283sg servo
FlySky GT3c (bought in classifieds) Modded with switch and firmware by myself.
El cheapo FlySky reciever

Last edited by jaloos; 11-14-2013 at 06:11 PM.
jaloos is offline   Reply With Quote
Sponsored Links
Old 10-29-2013, 05:50 PM   #2
Rock Crawler
 
Join Date: Feb 2012
Location: Tennessee
Posts: 645
Default Re: A Rebirth Of Cast Offs

Sounds Like a winner, It's about time you started using all of those parts.
Crank is offline   Reply With Quote
Old 10-30-2013, 06:34 AM   #3
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default Re: A Rebirth Of Cast Offs

Quote:
Originally Posted by Crank View Post
Sounds Like a winner, It's about time you started using all of those parts.
LOL yeah I know, takes a bit of time to collect them all when shopping the classifieds.
jaloos is offline   Reply With Quote
Old 10-30-2013, 06:47 AM   #4
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default Re: A Rebirth Of Cast Offs

***EDIT***

Decided to swap out my chassis choice here and ordered the Chaotic 2.2 Switch Smash chassis with Chaotic links.
I knew deep down that I wasn't going to be happy till I had a serious full suspension comp crawler so the chassis switch was made.

The Mantis will wind up with a set of Bully axles that I have kicking around.

Last edited by jaloos; 11-03-2013 at 02:45 PM.
jaloos is offline   Reply With Quote
Old 10-30-2013, 06:58 AM   #5
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default Re: A Rebirth Of Cast Offs

The wheels are Vanquish SLW V6's also from the classifieds.

The pic from the ad, they havs a tiny bit of rock rash on the rings nothing major though.



And now as they sit with a little flat black paint and a good bake in the oven,
yes the wife is aware of my using her oven even made her wait to use it while the rings were baking.
Lookin pretty dam good with the Voodoo's on them.



For the time being the Voodoo's are stuffed with some home made 5 inch foams with a 1 inch memory foam ring and some closed cell discs.
They seem decent enough but when the 5.5 Double Deuce foams make it here I am sure they will be getting switched out.
jaloos is offline   Reply With Quote
Old 10-30-2013, 07:11 AM   #6
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default Re: A Rebirth Of Cast Offs

Did the smash on the 2 Castle Micro Sidewinders and the Castle BEC.

Wired everything with 18 guage wire. I think it came out rather well, thanks to all that have posted their results and methods for doing this.







jaloos is offline   Reply With Quote
Old 10-30-2013, 07:15 AM   #7
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default Re: A Rebirth Of Cast Offs

****EDIT****

Changed my mind on the big bores and went with SCX shocks, Losi MRC silver springs and Jeepindoug cups.



Shocks are done with the cap mod and using Jeepindoug Mini T Spring Cups and Mini T Springs. I can see a set of Wicked Ends for them in the near future.


Last edited by jaloos; 11-04-2013 at 06:28 AM.
jaloos is offline   Reply With Quote
Old 10-30-2013, 08:22 AM   #8
RCC Addict
 
Join Date: Aug 2013
Location: Calgary - in the Great White North
Posts: 1,373
Default Re: A Rebirth Of Cast Offs

Hey, looks good Jaloos. Make sure you post some video when you get all those parts together. You ought to call it Top Secret since so many of the parts are classified.

Cheers eh,

Todd
Tossedman is offline   Reply With Quote
Old 10-30-2013, 08:33 AM   #9
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default Re: A Rebirth Of Cast Offs

Quote:
Originally Posted by Tossedman View Post
Hey, looks good Jaloos. Make sure you post some video when you get all those parts together. You ought to call it Top Secret since so many of the parts are classified.

Cheers eh,

Todd
LOL yeah I should have either that or garage sale build.

Its amazing how much you can get from these classifieds.
jaloos is offline   Reply With Quote
Old 10-31-2013, 08:25 AM   #10
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default Re: A Rebirth Of Cast Offs

Front axle is all mocked up, waiting the the weights. Had to make my own steering arms last order I placed with RCBros they were out of stock and I cant find another set. They will do till I get a set somewhere. Link mount still needs to be installed.

Question though with an SLW wheel what size of hub is the norm?
I just picked up a set of SLW V1 as well so I will have the option of usin a .7 or 1 inch wide wheel.
Am thinking of using the .7 wheel with a 725 hub in the front and the 1 inch wheel with a 600 in the rear.
Let me know if I am wayy out to lunch here.




Last edited by jaloos; 10-31-2013 at 08:29 AM.
jaloos is offline   Reply With Quote
Old 10-31-2013, 11:54 AM   #11
I wanna be Dave
 
Join Date: Jan 2012
Location: williamsport
Posts: 8,649
Default

With the typical 1" slw wheel.. I ran .475 in the front and the .600 in the rear..

So maybe the .600 in the front and the .725 in the rear.. the front is already wider, no need to make it even wider.. causes gate issues..
winnerone23 is offline   Reply With Quote
Old 10-31-2013, 03:59 PM   #12
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default Re: A Rebirth Of Cast Offs

Quote:
Originally Posted by winnerone23 View Post
With the typical 1" slw wheel.. I ran .475 in the front and the .600 in the rear..

So maybe the .600 in the front and the .725 in the rear.. the front is already wider, no need to make it even wider.. causes gate issues..
Thanks for the input looks like had it a little bass ackwards.
jaloos is offline   Reply With Quote
Old 10-31-2013, 05:34 PM   #13
Rock Crawler
 
Join Date: Feb 2012
Location: Tennessee
Posts: 645
Default Re: A Rebirth Of Cast Offs

VooDoo's Look killer on those wheels.

"Made the wife wait" We all know that's not how it works!
Crank is offline   Reply With Quote
Old 10-31-2013, 07:13 PM   #14
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default

Quote:
Originally Posted by Crank View Post
VooDoo's Look killer on those wheels.

"Made the wife wait" We all know that's not how it works!
No really she was gonna make muffins and I got to it before she did. LoL she knows better not to get in the way of my toys. Either way she knows once I am done I will be down in my little hole and she wont have to see me for the rest of the night.


Sent from my iPhone using Tapatalk 2
jaloos is offline   Reply With Quote
Old 11-03-2013, 05:12 AM   #15
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default Re: A Rebirth Of Cast Offs

Change of plans today.

Decided I wasn't going to be happy till I had a full suspension chassis and ordered the Chaotic 2.2 Switch Smash with links.

The 2 free Voodoo's didn't hurt the decision process any either and now I can grab a set of silvers for the front of it anyway. Thanks for the making the offer such a good one guys.

Now I will have some extra time to tear the axles down and do the final assembly.

Gonna need a full set of big bores now with Wicked ends and Jeepindoug cups as well.

What size shocks are people running on this chassis anyway?

Last edited by jaloos; 11-03-2013 at 05:47 AM.
jaloos is offline   Reply With Quote
Old 11-03-2013, 06:01 AM   #16
I wanna be Dave
 
Join Date: Jan 2012
Location: williamsport
Posts: 8,649
Default

Awesome decision! I doubt you will have any negative thoughts on ur choice once you hit the rocks... even simply once it hits ur hands! Quality is top notch and. Marc and Nick are too notch to deal with for Any needs, with customer service. :thumbup::cool:

Post up any questions or thru pm's. No shortage of knowledge from the Team drivers..
winnerone23 is offline   Reply With Quote
Old 11-03-2013, 06:07 AM   #17
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default Re: A Rebirth Of Cast Offs

Quote:
Originally Posted by winnerone23 View Post
Awesome decision! I doubt you will have any negative thoughts on ur choice once you hit the rocks... even simply once it hits ur hands! Quality is top notch and. Marc and Nick are too notch to deal with for Any needs, with customer service. :thumbup::cool:

Post up any questions or thru pm's. No shortage of knowledge from the Team drivers..
Ya I don't think I will have any regrets here, been eyeballing that chassis for long enough and when opportunity knocks one has to listen.

Wish the Dlux sliders had been in stock though LOL.
jaloos is offline   Reply With Quote
Old 11-03-2013, 06:38 AM   #18
I wanna be Dave
 
Join Date: Jan 2012
Location: williamsport
Posts: 8,649
Default

That's a dam shame.. get the ti ones when you get them. I have been running them for the life of my chaotic links and couldn't be happier!

I had to steal a pair off the front of the lower links for my sporty. Ya just don't realize how much of a help they are, until they aren't there!
winnerone23 is offline   Reply With Quote
Old 11-03-2013, 02:21 PM   #19
Rock Crawler
 
Join Date: Oct 2012
Location: Trail B.C.
Posts: 827
Default Re: A Rebirth Of Cast Offs

Great update day today.

Gotta thank a few people for their excellent help.

First off I gotta say thanks to Chaotic Crawlers for getting back to me on a question and going out of their way to get me the sliders in my order with zero delay. Wicked customer service can't say enough about it, extremely pleased with my customer experience with them. The 2 free Voodoo tires are just the cherry on the icing that is their customer service.

Second I need to thank winnerone23, I posed a few questions to him about tuning up the Chaotic Smash and I got extremely great answers from links, to setup to shocks. I have been talking with him for a while now on this chassis and he was pretty much the one who convinced me that it was what I was looking for. He had set me straight on a few misconceptions and ideas I had and saved me allot of trial and error. with as much knowledge that he shared with me I would have thought he worked or drove for Chaotic. A very good ambassador to the hobby.

Third Wicked Wolf RC. He had a contest and had a deal on the Wicked Ends that was exactly what he said. Picked up the Wicked ends and the Jeepindoug cups from him and he gave me the sweet deal on the pair. Excellent hobby support and customer service.

So update for today is:

Chaotic 2.2 Switch Smash
Chaotic Switch Bodiless Titanium Links
Dlux Fab titanium link sliders
4mm Revo Rod Ends

SCX Shocks
Losi MRC Pro Silver Springs
Jeepindoug Spring Cups

My Wallet Hurts ROFL

Last edited by jaloos; 11-03-2013 at 02:27 PM.
jaloos is offline   Reply With Quote
Old 11-04-2013, 07:05 AM   #20
I wanna be Dave
 
Join Date: Jan 2012
Location: williamsport
Posts: 8,649
Default

Thank you sir, for the kind words.. very humbling.. much respect for you!

Any time or anything, I'm here to help and enjoy it..
Can't wait to see ur new labor of love come together! Pics pics pics! :thumbup:
winnerone23 is offline   Reply With Quote
Reply



A Rebirth Of Cast Offs - Similar Threads
Thread Thread Starter Forum Replies Last Post
The Destruction and Rebirth TXJeeper1 Axial Wraith 18 01-05-2013 10:25 AM
Trekker Rebirth... Big Mike Micro Scale Rigs 10 06-29-2012 01:29 AM
Rebirth of The R1 Steve Hipsley G-Made Crawlers 7 02-25-2012 04:31 PM
rebirth of the bruiser Soviet911 (bruiser) General Crawlers 19 03-02-2006 06:32 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com