Comp rigs are a special breed. They are built and designed to challenge the status quo, fight gravity, and put a smile on the face of the driver and spectator alike. Scalers can't do what comp rigs can do, and because of that, comp rigs will never die.

This truck has been in the planning stage since last year. The parts and time finally came together and here is the Crawler Innovations Double Agent.

First and foremost, a huge Thank You to my sponsors on this build:


Holmes Hobbies
Y Town Crawlers
Vanquish Products




Links:
https://farm4.staticflickr.com/3881/...9b483422_o.jpg


Rod ends
https://farm6.staticflickr.com/5481/...f0ab59e7_o.jpg


Set Up #1
https://farm6.staticflickr.com/5577/...74c4d361_o.jpg


Set Up #2
https://farm4.staticflickr.com/3897/...65ae6966_o.jpg


Set Up #3
https://farm3.staticflickr.com/2918/...5b1ba2b9_o.jpg


Set Up #4
https://farm4.staticflickr.com/3850/...260dd36f_o.jpg


Axles:
https://farm6.staticflickr.com/5522/...a2f1c0c7_o.jpg


https://farm4.staticflickr.com/3897/...11c5b8dd_o.jpg



Specifications:
- Axial XR-10 Axles

Front axle Upgrades:
VP Ti Steering Link
Crawler Innovations Engraved Servo Guard
Axial Machined Gear Set - Full
Axial Titanium Top Shaft
Rowdy Racing Battery Tray
VP Aluminum Case Top
VP Aluminum C - Hubs
VP Aluminum Steering Knuckles
VP Aluminum Motor Plate
VP Aluminum Transmission
VP Upper Link Mount
VP XR-10 Knuckle Weights (modified)


Rear upgrades:
Axial Machined Gear Set - Full
Axial Titanium Top Shaft
VP Aluminum Case Top
VP Aluminum Lock Outs
VP Aluminum Motor Plate
VP Aluminum Transmission
VP Upper Link Mount



Shocks;
Front:
3.5 Traxxas Big Bore
3 Hole Piston
15 Weight Oil
JeepinDoug Mini T Spring Cups for 2.2
Mini T Soft front springs
Shock Cap Mod
Limited Internally 6mm


Rear:
3.5 Traxxas Big Bore
3 Hole Piston
25 Weight Oil
JeepinDoug Mini T Spring Cups for 2.2
Mini T Soft front springs
Shock Cap Mod
Limited Internally 6mm


Chassis:
Y Town Crawlers, Carbon Fiber, Double Agent


Skinz:
Custom Made by Freq-E-Tag Designs


Links:
Chaotic Crawler Titanium Lower Links
Lunsford Straight Titanium Uper Links


Electronics:
- Hitec 7954 Steering Servo; programmed

- Holmes Hobbies Smashed BRXL Mini's ESC's

- CC BEC; programmed to 7.4 volts

- Holmes Hobbies Motors:
2 x Holmes Hobbies 16T Hand Wound

Battery:
850mah, 30C, 3S, Align Lipo


Pictured Wheel, Tire & Foam Set up;

Front:
CI 6 Bolt Wheels
HB White Dot Rover sanded, siped & grooved combined with a HB Red Dot Block Truggy Tire sanded, siped & grooved
CI Double Deuce Foams;
5.5" Comp Cut Inner
Soft Outer
350 SLW Hub

Rear:
CI 6 Bolt Wheels
HB White Dot Sedona sanded, siped & grooved combined with a HB Red Dot Block Truggy Tire sanded, siped & grooved
CI Double Deuce Foams;
5.5" Comp Cut Inner
Soft Outer
600 SLW Hub

Completed Pics"thumbsup":

https://farm4.staticflickr.com/3907/...a564fc47_o.jpg


https://farm6.staticflickr.com/5557/...a400b86e_o.jpg


https://farm4.staticflickr.com/3855/...22dcb9c8_o.jpg


https://farm6.staticflickr.com/5596/...d47359bd_o.jpg


https://farm4.staticflickr.com/3896/...d6d2667c_o.jpg


https://farm4.staticflickr.com/3922/...31f55484_o.jpg


https://farm6.staticflickr.com/5558/...9dfa420e_o.jpg


https://farm3.staticflickr.com/2914/...7df50fc4_o.jpg


https://farm3.staticflickr.com/2924/...67c0e7d9_o.jpg

Originally Posted by losiking1 (Post 4834998) Looks awesome Eddie. Will we see you in September?

A video of the Double Agent at Barnwell Mountain ORV Park:

<iframe src="//www.youtube.com/embed/R5QV6GUdHic" allowfullscreen="" frameborder="0" height="315" width="560"></iframe>

Originally Posted by MountainStorm (Post 4835141) What a build. Benchmark.

Originally Posted by TEDROCKZ (Post 4835198) Now we know who has been hoarding the last of the VP XR parts:flipoff: Good to see you back in the comp section again. Lonely in here:ror:

Originally Posted by jerrys800 (Post 4835233) awesome rig,enjoy"thumbsup",great colors,you can also paint the carbon panels with the tamiya color ts-73 clear orange like i did and it's awesome"thumbsup",i'll tex you a picture, all my freinds know i live orange"thumbsup"thanks for sharing

Originally Posted by letsgetrcin (Post 4836090) I like your VP color scheme. Every part sticks out.

Originally Posted by Nova's Ark (Post 4836129) I cannot take credit for that. The story goes, I already had the Y Town Crawlers Double Agent Chassis @ the CI shop. I couldn't find a second set of VP'd XR Axles. VP didn't have them, team driver or not. However, Steve connected me with Rob who works @ VP and wanted to sell his axles. They had stock gears, universals, on a stock xr chassis with VP DH wheels. I bought the rig for the parts I needed and sold the rest. The beadlocks were orange and went perfect with another build the 2.2 Mini Clod. Build Thread: http://www.rccrawler.com/forum/tamiy...shelf-rig.html

Originally Posted by Nova's Ark (Post 4835133) Comp rigs are a special breed. They are built and designed to challenge the status quo, fight gravity, and put a smile on the face of the driver and spectator alike. Scalers can't do what comp rigs can do, and because of that, comp rigs will never die.

This video is a compilation of video footage from many different RC cars Crawler Innovations has built and used to test and develop CI products. This video has the Sczcerba built 8x8 crawler hauler, "Top Shelf", CI "mega truck", 3 Pro 2.2 MOA trucks, 1 Sportsmans truck, "Big Blue", and 1:6 Willis Jeep. All vehicles have Crawler Innovations foams in one flavor or another.

Crawler Tires, Crawler Foams, Parts and Accessories by Crawler Innovations



<iframe src="https://www.youtube.com/embed/6a84m7evLK4" allowfullscreen="" frameborder="0" height="315" width="560"></iframe>

Crawler Innovations reviews (and by review CI means that we show you what the tires do on the rocks, not talk about them) the new RC4WD 2.2 Bully Competition Tire for RC Rock Crawlers of the competition flavor. By referencing "comp" it means that the rc rock crawler is not scale to a 1:1 rock crawler; it means the rc rock crawler vehicle is designed for all out performance within the class rules it competes in.

In this video, the tires have been trimmed into a new pattern by removing pins. Crawler Innovations is using two different trucks, built to USRCCA 2.2 Pro specifications. Each truck has a build thread linked to it below;

Truck featured is 2.2 Pro, Y Town Crawlers Double Agent XR-10;
http://www.rccrawler.com/forum/axial...gent-xr10.html

Truck featured is 2.2 Pro, Y Town Crawlers Secret Agent XR-10;
http://www.rccrawler.com/forum/axial...-10-build.html

All of the tires, foams, and wheels used in this video are off the shelf parts and unmodified. Anyone can purchase these parts. There will be a full write on RCCrawler - News, Reviews, Videos and much more! in the tires and wheels section. Full write up on RCC;
http://www.rccrawler.com/forum/tires...comp-tire.html

All trucks used Crawler Innovations 6 Bolt Wheels that use Vanquish Products SLW hubs, all trucks used Crawler Innovations Double Deuce Foams in one flavor or another.

The first video testing the tires in stock form is here:
https://www.youtube.com/watch?v=yElUpxivbAY

Thank you for watching.

Crawler Tires, Crawler Foams, Parts and Accessories by Crawler Innovations


<iframe src="https://www.youtube.com/embed/ZmQcOJQHdfo" allowfullscreen="" frameborder="0" height="315" width="560"></iframe>

Originally Posted by rude_k9 (Post 5392770) Cool video's Thanks.

https://c1.staticflickr.com/1/608/31...606f30d9_b.jpg

This video features the Crawler Innovations Double Agent XR10 that uses Axial XR10 custom built MOA axles fitted with Vanquish Products upgrades. The chassis is a carbon fiber Y Town Crawlers Double Agent. All suspension and steering links are titanium. The tires are cut n shut, Hot Bodies, white compound, Sedona tires that have been narrowed, tread pattern clocked, sidewalls have been shaved, and the remaining lugs grooved. The rims are 1" width, 6 Bolt Wheels from Crawler Innovations, that use Vanquish Products SLW aluminum hubs for strength and adjustable track width, P/N; CWR-5003. The tire foams are Crawler Innovations Double Deuce 5.25", Comp Cut Inner with Soft Outer front; P/N; CWR-1044 and Comp Cut Inner with Medium Outer Rear; P/N; CWR-1045.

Full Build Thread of comp crawler;
http://www.rccrawler.com/forum/axial...gent-xr10.html

Crawler Innovations Web Store;
RC Crawler Foams, Rock Crawler Foams, Tires and More by Crawler Innovations

The source RCCrawler;
http://www.rccrawler.com/forum/

Video Credits;
Double Agent XR10 driven by Gavin Ayala
edited by Gavin Ayala
filmed by Gavin Ayala

Gavin's channel;
https://www.youtube.com/channel/UC7o...w84G931mmCGgaA



<iframe src="https://www.youtube.com/embed/teg0FURQzXc" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="" width="560" height="315" frameborder="0"></iframe>


#crawlerinnovations #activatedoutlaw #doubledeucefoams

Activated Outlaw Score Sheets;

https://farm8.staticflickr.com/7822/...20b2e6f9_b.jpg

https://farm8.staticflickr.com/7893/...cf2c7729_b.jpg

Here are some photos from the Activated Outlaw Get Together on 02.02.2019:

Credit for the photos belong to my daughter Destinee.

https://farm8.staticflickr.com/7823/...6f3f84d7_c.jpg


https://farm8.staticflickr.com/7817/...1ffa6c1c_c.jpg


https://farm8.staticflickr.com/7812/...dd0488e2_c.jpg


https://farm8.staticflickr.com/7801/...b42173db_c.jpg


https://farm8.staticflickr.com/7850/...1cde305a_c.jpg

More photos, credit to A Spell of Sophrosyne

https://farm8.staticflickr.com/7874/...5b0fb186_c.jpg


https://farm8.staticflickr.com/7865/...f36dacb1_c.jpg


https://farm8.staticflickr.com/7802/...ce31850b_c.jpg


https://farm8.staticflickr.com/7820/...cfacaed5_c.jpg


https://farm8.staticflickr.com/7918/...aaf69de2_c.jpg

Gavin and I (Edmundo Ayala) will be driving and filming RC cars on April 6, 2019 at the White Oak City Park in White Oak, Texas.
Start Time 9:30AM


Park Address:
500 E. Magnolia St.
White Oak, TX 75693


Park Web Site:
https://www.cityofwhiteoak.com/depar...oak-city-park/


The courses will be set based on the rc vehicles in attendance. So whatever the majority of the group has to drive, that is what we will run. No one will be turned away, and every RC will have a chance on course.

Based on our last two Get Togethers, fun was had by everyone, and more people are showing up. The March Get Together had three Competition course and three Activated courses.


Consider this your formal invite to stop by, drive your RC car and meet other hobbyists. This is not a competition or full blown event. This a get together with focus on driving and visiting. I hope to see you there and possibly get your RC car on camera.


https://farm8.staticflickr.com/7825/...78f7ec09_b.jpg


Score Sheet that will be used:
https://farm8.staticflickr.com/7822/...20b2e6f9_b.jpg


https://farm8.staticflickr.com/7893/...cf2c7729_b.jpg


Here is a full length (2.5hrs) video that Gavin made of the March Get Together. It is complete with a introduction and overview, along with every run from the day.
<iframe src="https://www.youtube.com/embed/OMATgSpns1c" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="" width="560" height="315" frameborder="0"></iframe>





#crawlerinnovations #ayalametalworks #activatedoutlaw #doubledeucefoams #deuceswildwfoams #lilnovafoams #compcrawler #scalecrawler #rccrawler

Originally Posted by Morbid Angel (Post 5947634) Whats up with the “4 pounds minimum” rule for moa? Didn’t realize there where weight restrictions.

Gavin and I (Edmundo Ayala) will be driving and filming RC cars on August 3, 2019 at the Goodman-LeGrand House & Museum in Tyler, Texas.

Start Time 9:30AM

Goodman-LeGrand House & Museum
624 North Broadway Avenue
Tyler, Texas 75702
(903) 531-1286
gmuseum@tylertexas.com


Goodman-LeGrand House & Museum Web Site:
http://www.parksandrec.cityoftyler.o...anLeGrand.aspx


The courses will be set based on the rc vehicles in attendance. So whatever the majority of the group has to drive, that is what we will run. No one will be turned away, and every RC will have a chance on course.

The Goodman-LeGrand location has great terrain for scale RC's as well as comp crawlers. This is our 3rd get together at this location for 2019. We are hopeful to run three Competition course and three Activated courses.


Consider this your formal invite to stop by, drive your RC car and meet other hobbyists. This is not a competition or full blown event. This a get together with focus on driving and visiting. I hope to see you there and possibly get your RC car on camera.


https://live.staticflickr.com/65535/...87e84fab_o.jpg


Score Sheet that will be used:
https://farm8.staticflickr.com/7822/...20b2e6f9_b.jpg


https://farm8.staticflickr.com/7893/...cf2c7729_b.jpg


Here is a 45 minute video that Gavin created of the July Get Together which was held at this location. "Activated Class" or scale trucks were run on that day since that is what the majority or the group brought.
<iframe src="https://www.youtube.com/embed/YbilR6jNh0c" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="" width="560" height="315" frameborder="0"></iframe>




#crawlerinnovations #ayalametalworks #activatedoutlaw #doubledeucefoams #deuceswildwfoams #lilnovafoams #compcrawler #scalecrawler #rccrawler

Here are three videos of this crawler being shared between three drivers:shock:


Competition Limited Course 1;
<iframe src="https://www.youtube.com/embed/Ut4KV-8gu4k" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="" width="560" height="315" frameborder="0"></iframe>


Competition Limited Course 2;
<iframe src="https://www.youtube.com/embed/6iWUgz63ndA" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="" width="560" height="315" frameborder="0"></iframe>


Competition Limited Course 3;
<iframe src="https://www.youtube.com/embed/sveJcss7_pQ" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="" width="560" height="315" frameborder="0"></iframe>


Thank you for watching. "thumbsup"

Wow, one calender year since a post in this build thread. This crawler is very much in competition condition. I was first to attempt the course when we switched to MOA's in the video.

A vlog style video of the afternoon of 12/20/2020 at Crawler Innovations. Orchel came over to join Gavin and I (Edmundo), as well as Ezra on our backyard U4 test track, followed by a course of comp crawling 2.2 Limited rigs.

<iframe src="https://www.youtube.com/embed/dlhhp_PET24" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="" width="560" height="315" frameborder="0"></iframe>

Originally Posted by Mr Hyde (Post 6059294) Great video,want the orange bolt.rims..my kids and I watched the.whole thing the XR10 were so sweet

Originally Posted by Nova's Ark (Post 6059322) That is awesome that your children watched it too! Thank you for your views. The orange wheels should be available Jan 2021.