RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial XR10 (http://www.rccrawler.com/forum/axial-xr10/)
-   -   Axial XR-10 a.k.a Smurfette (http://www.rccrawler.com/forum/axial-xr10/504975-axial-xr-10-k-smurfette.html)

Zarizi Tech 12-19-2014 09:11 AM

Re: Axial XR-10 a.k.a Smurfette
 
Quote:

Originally Posted by ittybitty (Post 5038502)
Why do you cut and solder all of those connections? Why not pick up some crimpers and the terminals to make it much easier and cleaner?

Economy Crimping Tool

Hansen Hobbies - Gold Female Terminals for Standard .100" (2.54mm) Connector Housings

Didn't even know about these.. :roll: Thanks for the tip Ryan!! "thumbsup" Gonna do that next time!

Jslick 12-19-2014 09:37 AM

Re: Axial XR-10 a.k.a Smurfette
 
just ordered up the kit and the tools. I saw this info a long time ago."thumbsup"

Zarizi Tech 12-22-2014 11:24 AM

Re: Axial XR-10 a.k.a Smurfette
 
Yesterday, I had enough time to get this thing going.

http://paron.pp.fi/ZT%20Mekkausmekka...4/IMG_1207.JPG
All electronics are working perfectly. No smoke what so ever. :flipoff:I really had to narrow down the EPA's from the TX, cause the motors are really making this thing fly. :shock:

http://paron.pp.fi/ZT%20Mekkausmekka...4/IMG_1206.JPG
It's looking much better at the moment than my pro. :lmao: I only have to clean those receiver wires together, so they will all be in the same spot, without moving too much. Other than that, it's ready to go. "thumbsup"

Zarizi Tech 12-26-2014 01:55 AM

Re: Axial XR-10 a.k.a Smurfette
 
http://paron.pp.fi/ZT%20Mekkausmekka...4/IMG_1242.JPG
Adding a little bit more blue before it's ready. "thumbsup"

http://paron.pp.fi/ZT%20Mekkausmekka...4/IMG_1243.JPG
It's all there now. Except for soldering the batteries. :mrgreen:

http://paron.pp.fi/ZT%20Mekkausmekka...4/IMG_1244.JPG
Now we'll just have to continue with Sofi's shafty build next.

Softy 12-27-2014 08:10 AM

Re: Axial XR-10 a.k.a Smurfette
 
Smurfette is finally done! I was able to try it today and this time with my own electronics :lmao:But because of the snow I had to forget the rocks and concentrate my driving on the carage floor... Even though the floor was a bit slippery I could still feel the power of smurfette. Yeah, it flies. Can't wait to get to the rocks! "thumbsup"

ZZR 1100 Racer 12-30-2014 02:05 AM

Re: Axial XR-10 a.k.a Smurfette
 
Great looking rig, Sofi!! Hope you will hold on crawling for a long time!!!

...good choice on the motors - you will love these small parts:mrgreen:

jollyjeeper 12-30-2014 07:15 PM

Re: Axial XR-10 a.k.a Smurfette
 
Beautiful model. Congratulations. Haha! Awesome build. Love the attention to detail on even the wiring. Nice job. Keep us posted!

Zarizi Tech 01-09-2015 10:08 AM

Re: Axial XR-10 a.k.a Smurfette
 
http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_1383.JPG
Smurfette is ready to hit the rocks first time in 2015.

http://pnc.pp.fi/RC/CRAWL/RFOT%27s%2...s/RFOTS_C1.jpg
At RFOT's Crawl Cup #1/12 Arctic Special tomorrow! :mrgreen:

ClassiCutCustoms 01-09-2015 10:15 AM

Re: Axial XR-10 a.k.a Smurfette
 
Good luck Samu and Sofi......take some video please [emoji41]

Zarizi Tech 01-09-2015 10:19 AM

Re: Axial XR-10 a.k.a Smurfette
 
Quote:

Originally Posted by ClassiCutCustoms (Post 5108010)
Good luck Samu and Sofi......take some video please [emoji41]

Thanks, you can count on it! "thumbsup"

Zarizi Tech 01-11-2015 07:30 AM

Re: Axial XR-10 a.k.a Smurfette
 
Sofi started her season in Arctic Special with pro class as well.

http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010019.JPG
The only thing, that would've made the weather perfect would have been the sun. But it was awesome nevertheless. 8)

http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010020.JPG
Driving Smurfette first time with it's own electronics and the Holmes motors. "thumbsup"

http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010041.JPG
Terrain was extreme. Icy and snowy rocks. :mrgreen:

<iframe width="640" height="360" src="//www.youtube.com/embed/gAywHwIEw8Y?feature=player_detailpage" frameborder="0" allowfullscreen></iframe>
Sofi on course three. The best course for her all day. Only two reverses. "thumbsup"

http://paron.pp.fi/TULOKSET/Crawling...n%20Keidas.jpg
On first three courses the driving was really good, but on fourth course Sofi didn't make it to the finishing line. Too bad, it would have been close fight with Saku. :mrgreen:

http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010187.JPG
Third place for Smurfette. Good thing was, that the rig is working great. There's nothing that we have to change before the next comp in February. "thumbsup"

http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010190.JPG
It was already dark when we finished the comp. But awesome day with some top drivers. Good way to start the season! "thumbsup"

Next time Smurfette will be in action on February 21st at indoor comp in Lahti, Finland. "thumbsup" Already waiting for that of course.

Softy 01-11-2015 08:28 AM

Re: Axial XR-10 a.k.a Smurfette
 
It was the first comp for smurfette with my own electronics. Weather conditions were interesting. I can say that I had some good and some bad performances. Smurfette is amazingly good car to drive because everything works perfectly. I noticed that those motors have a lot of power. Brilliant motors! "thumbsup"

Car went smoothly on the snow thanks to the great voodoos! I had few stupid gates but a lot of training with smurfette! All in all it was a fun race. After this artic special I'm really looking forward to our INDOOR competition :lmao:

cabron 01-11-2015 05:01 PM

Re: Axial XR-10 a.k.a Smurfette
 
yay for smurfette

show the guys how it is supposed to be done
with class and a smile

crawl-o-matic 01-12-2015 06:36 AM

Re: Axial XR-10 a.k.a Smurfette
 
Great stuff, keep it up!!

SkaldidDog 01-12-2015 08:48 AM

Re: Axial XR-10 a.k.a Smurfette
 
Snow comp...nuts.:shock:

J

Zarizi Tech 01-12-2015 09:14 AM

Re: Axial XR-10 a.k.a Smurfette
 
Quote:

Originally Posted by SkaldidDog (Post 5111044)
Snow comp...nuts-ice cold.:shock:

J

Fixed it for ya. "thumbsup"

Hittman 01-12-2015 08:10 PM

Re: Axial XR-10 a.k.a Smurfette
 
Good to see this rig still alive and kickin. Glad it went into the hands of a very capable driver"thumbsup""thumbsup"

JohnRobHolmes 01-12-2015 10:20 PM

Re: Axial XR-10 a.k.a Smurfette
 
I'm glad you like the motor, I'm particularly fond of the Puller 400s in little shafties. There is plenty of room to go slower if you ever want less power ;-)

Quote:

Originally Posted by Softy (Post 5109988)
It was the first comp for smurfette with my own electronics. Weather conditions were interesting. I can say that I had some good and some bad performances. Smurfette is amazingly good car to drive because everything works perfectly. I noticed that those motors have a lot of power. Brilliant motors! "thumbsup"

Car went smoothly on the snow thanks to the great voodoos! I had few stupid gates but a lot of training with smurfette! All in all it was a fun race. After this artic special I'm really looking forward to our INDOOR competition :lmao:


Purptr8r 01-12-2015 11:38 PM

Re: Axial XR-10 a.k.a Smurfette
 
Quote:

Originally Posted by Zarizi Tech (Post 5109935)
Sofi started her season in Arctic Special with pro class as well.

http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010019.JPG
The only thing, that would've made the weather perfect would have been the sun. But it was awesome nevertheless. 8)

http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010020.JPG
Driving Smurfette first time with it's own electronics and the Holmes motors. "thumbsup"

http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010041.JPG
Terrain was extreme. Icy and snowy rocks. :mrgreen:

<iframe width="640" height="360" src="//www.youtube.com/embed/gAywHwIEw8Y?feature=player_detailpage" frameborder="0" allowfullscreen></iframe>
Sofi on course three. The best course for her all day. Only two reverses. "thumbsup"

http://paron.pp.fi/TULOKSET/Crawling...n%20Keidas.jpg
On first three courses the driving was really good, but on fourth course Sofi didn't make it to the finishing line. Too bad, it would have been close fight with Saku. :mrgreen:

http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010187.JPG
Third place for Smurfette. Good thing was, that the rig is working great. There's nothing that we have to change before the next comp in February. "thumbsup"

http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010190.JPG
It was already dark when we finished the comp. But awesome day with some top drivers. Good way to start the season! "thumbsup"

Next time Smurfette will be in action on February 21st at indoor comp in Lahti, Finland. "thumbsup" Already waiting for that of course.

after seeing how well voodoos work in the snow im buying a few sets to cutnshut onto the bottoms of my sneakers for walking around here in new england winters.....:flipoff:

crawl-o-matic 01-13-2015 01:19 PM

Re: Axial XR-10 a.k.a Smurfette
 
Not a bad idea:mrgreen:


All times are GMT -6. The time now is 03:15 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com