I want to get back to crawlin. A few years ago I built an XR10 With aftermarket everything and loved it but for some reason sold it. I'm looking at buying a used XR10 and a used Futaba 4PLS is this a good radio for front and rear dig ability and is there still quite a bit of aftermarket support for these rigs. I'll want a different chassis and links. Thanks in advance for any direction you all can point me in. Andrew |
Mr Quote:
http://www.rccrawler.com/forum/elect...etup-help.html |
Re: I want to get back to crawlin. Mt4 airtronics and a homebrew mistress chassis! 149 r/c worx Team Driver |
Re: Mr Quote:
|
Re: I want to get back to crawlin. Quote:
|
Mr Quote:
|
Re: I want to get back to crawlin. That's cool. We both bought our Snakes brand new. I show mine about 4 times a year. |
Re: I want to get back to crawlin. Stock up on gears! They are getting hard to get |
Re: I want to get back to crawlin. ^are they really getting hard to get where do you order yours from @sdheavymetal |
Re: I want to get back to crawlin. The gears are still available from HR as is the big bearing gearbox the price is not bad either. The hardest part for me to find is the rear axles and the top shaft for the front axle. 49 mm long I believe, not the 58 mm long rear one. |
Re: I want to get back to crawlin. About the radio, I don't know much about the Futaba but everybody in our club runs the Airtronics (Sanwa) MT4 it's a real easy setup for dual ESC. The controlls are good also. It has a lever right where your left thumb sits to controll the front/rear dig. It's also proportional so you can set more or less power to one end, not off or on. I run a front axle in the rear because it' a much better design' don't have to do 2 bolt mod and less spare parts to stock. It takes all the same parts as the rear axle. The only mod are to one of the axles. You have to trim one of the tangs where it goes in to the gear. Good luck. |
Re: I want to get back to crawlin. I advise others to stay away from the XR because part support isnt what it used to be. They can be stout but it takes alot to get there and many of those parts are unavailable. |
Re: I want to get back to crawlin. I'd build a berg instead of an xr10. |
Re: I want to get back to crawlin. Either build a bully2 or a berg , xr stuff is to hard to track down now. As for the radio grab the 4pls it is the new 4pl. |
Re: I want to get back to crawlin. Quote:
I'm running a RC4WD Bully2 front and a Dlux rear axle(berg). |
Re: I want to get back to crawlin. Quote:
|
All times are GMT -6. The time now is 10:07 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com