04-30-2017, 09:52 AM | #1 |
Newbie Join Date: Apr 2017 Location: Johnstown
Posts: 9
| New, to me, XR10...help
Hey guys! I'll start off by saying I'm new to RC crawling and pretty new to the RC world. I've had a couple Traxxas cars in the past but never got too into them. My boss had this Axial XR10 laying around doing nothing so I asked him about it and he said I could have it. He told me it is a BeetleJuice chassis? It doesn't have a battery, radio or receiver. It does have two Tekin FX-R(I think) esc's and two motors. What are the capacitors(?) wired on top of the esc's for? I think the motors are both Holmes Hobbies Torquemaster Expert 540. One I can tell for sure, the other is in a full case it looks like. It also has a cc bec and a Hitec 7954sh steering servo. I need help picking out a transmitter/radio, receiver and battery for this thing that won't totally break the bank. I'm also probably need help getting it all set up My first real project with it is going to be pulling everything apart and cleaning it up! Thanks for any and all help or advice! -Kaleb |
Sponsored Links | |
04-30-2017, 10:55 AM | #2 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: New, to me, XR10...help
Airtronics Mt4 is the rx TX you want. Rcbros has battery trays for this car. 3s 500mha is what you need for batteries. It's a very nice rig. 149 r/c worx /scalerfab Team Driver |
04-30-2017, 11:48 AM | #3 | |
Newbie Join Date: Apr 2017 Location: Johnstown
Posts: 9
| Re: New, to me, XR10...help Quote:
This a good battery? https://hobbyking.com/en_us/graphene...ah-3s-65c.html | |
04-30-2017, 12:16 PM | #4 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: New, to me, XR10...help
I use team brood racing batteries for mine because they fit properly 149 r/c worx /scalerfab Team Driver |
04-30-2017, 12:23 PM | #5 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: New, to me, XR10...help
The futaba is nice but I prefer the airtronics because of the lever 149 r/c worx /scalerfab Team Driver |
05-19-2017, 09:45 PM | #6 |
Quarry Creeper Join Date: Jan 2016 Location: Southampton
Posts: 254
| Re: New, to me, XR10...help
Like snaponboy said, Airtronics (Sanwa) MT-4 is my choice. Once you get used to using the dig lever it's so much easier to drive. Nice looking rig by the way. I also use fx-r ESC, I love the setup and easy to get set to my style of driving. Good luck
|
05-19-2017, 10:24 PM | #7 |
I wanna be Dave Join Date: Dec 2006 Location: here
Posts: 3,042
| Re: New, to me, XR10...help
I love my futaba 4pl only radio I've owned.
|
05-20-2017, 10:27 AM | #8 |
Pebble Pounder Join Date: Nov 2016 Location: Southern California
Posts: 183
| Re: New, to me, XR10...help
Running with my Futaba 4pls and loving it. Haven't used the MT4 though. Sent from my iPhone using Tapatalk |
05-20-2017, 08:47 PM | #9 |
I wanna be Dave Join Date: Apr 2010 Location: Oakridge
Posts: 3,305
| Re: New, to me, XR10...help
I think the radio will come down to the old "Ford or Chevy", I think it is kind of personal preference. When I had my MOA I used a SkyFly GT3c hacked. As matter of fact I still have 2 I use for my scalers! Good luck and welcome to RCC. Ernie I also have a 4pl and love it! Last edited by CODYBOY; 05-20-2017 at 08:49 PM. |
05-25-2017, 09:07 PM | #10 |
Newbie Join Date: Apr 2017 Location: Johnstown
Posts: 9
| Re: New, to me, XR10...help
This has been on the back burner for almost a month now. The guy I got this from happened to still have(and found) the tx and rx and not need them anymore. So I have those now. Its a Futaba T4PL and Futaba R2104GF. So now I just want to pull everything apart and clean it up. He also mentioned there may be some burned/stripped gears, so I need to figure out how to check that. I kind of like the look of titanium links. Is there any benefit to keeping the plastic ones(probably not accurate) that are on it over titanium? Where is a good place to get them? |
05-26-2017, 12:06 AM | #11 |
Pebble Pounder Join Date: Nov 2016 Location: Southern California
Posts: 183
| Re: New, to me, XR10...help
The links available will depend on your chassis man. Eric from DluxFab can fabricate some pretty sick links though. Sent from my iPhone using Tapatalk |
05-26-2017, 07:11 PM | #12 |
Newbie Join Date: Apr 2017 Location: Johnstown
Posts: 9
| Re: New, to me, XR10...help Thats kinda what I was thinking would be the case. This is a beetlejuice chassis, which isn't made anymore as far as I can tell. Does anyone make links for it? Or will I have to go custom?
|
05-29-2017, 03:27 PM | #13 |
Rock Stacker Join Date: May 2011 Location: quebec city
Posts: 71
| Re: New, to me, XR10...help
I use the turnigy graphene 800mah 3s 45-90c fir my rigs , perfect fit
|
06-18-2017, 07:53 PM | #14 |
Newbie Join Date: Apr 2017 Location: Johnstown
Posts: 9
| Re: New, to me, XR10...help
I figured out why the guy I got this from hadn't been using it... The bearing was next to the e-clip when I opened it up. Is there anywhere to get the gears for this still? The 22t and 36t are both backordered on Axial's site, and RC4WD doesn't make their hardened set anymore. Am I SOL? |
06-18-2017, 07:54 PM | #15 |
Newbie Join Date: Apr 2017 Location: Johnstown
Posts: 9
| Re: New, to me, XR10...help
This is the front gearbox. Also, I found a couple of screws loose when taking it apart. One of the lower housing screws, and one on the motor plate.
|
06-18-2017, 08:19 PM | #16 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: New, to me, XR10...help
The gears are available on ebay. You need the ax30551 Sent from my SAMSUNG-SM-G935A using Tapatalk |
06-18-2017, 08:21 PM | #17 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: New, to me, XR10...help
Don't use a bearing there use a brass bushings, locked up rc has them Sent from my SAMSUNG-SM-G935A using Tapatalk |
06-18-2017, 08:42 PM | #18 |
Newbie Join Date: Apr 2017 Location: Johnstown
Posts: 9
| Re: New, to me, XR10...help |
06-18-2017, 08:46 PM | #19 |
Newbie Join Date: Apr 2017 Location: Johnstown
Posts: 9
| Re: New, to me, XR10...help |
06-18-2017, 08:47 PM | #20 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: New, to me, XR10...help
I'm not sure, I can check for you tomorrow morning. Sent from my SAMSUNG-SM-G935A using Tapatalk |
New, to me, XR10...help - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Jakesy's XR10 video thread ( latest vid-XR10 vs Bully) | jakesy | Videos! | 28 | 05-15-2011 04:49 PM |
| |