Help with my old XR10
 

Hello, I rescued my old XR10 from the closet, everything is assembled but the receiver is missing, my setup is with two esc Tekin fx-r, and a Bec castle 10amp, but I don't remember how the cables are connected.
Is there a plan or diagram to help me avoid a disaster?
I have 4 pins to connect to the receiver, and I see that some only connect one or two wires.
I don't know if I explain myself well, my English is very bad.
I would appreciate any help, looking forward to enjoying this authentic climber again.

Re: Help with my old XR10
 

Here's a thread with a lot of information that will help:
http://www.rccrawler.com/forum/axial...r10-guide.html