motor and esc for a xl kit
 

just got a yeti kit on order. what to power it with?

Re: motor and esc for a xl kit
 

The Vanguard 2200kv set up with the RTR is good however if I had to choose I'd run the CC MM2 due to the adjustable BEC with the 1515 2200kv motor which is the same as the RTR just a better ESC IMO."thumbsup"
http://www.castlecreations.com/image...etal-2-325.jpg

Re: motor and esc for a xl kit
 

thinking tekin motor esc like rsx 8

Re: motor and esc for a xl kit
 

Viper vtx8 (waterproof) and tekin 1700 TRUGGY motor

Re: motor and esc for a xl kit
 

Depends if you want to run 4S or 6S as well I'd say. If you run 6S you could probably get away with a lower Kv motor around the 2000 range, on 4S the 2200 seems ok and could be geared higher since temps aren't an issue.

Re: motor and esc for a xl kit
 

Good choice! Planning with this setup for my rtr soon

Re: motor and esc for a xl kit
 

yes I run 4 s packs

Re: motor and esc for a xl kit
 

For the esc definitely mamba monster 2.

Re: motor and esc for a xl kit
 

lets get a list started for esc and motor

Re: motor and esc for a xl kit
 

Gen 2 RX8 and your flavor of Tekin t8. I also bash around with castle neu motors and turnigy. They are great, never had problems except bearings but it's tough to beat the t8 motors. Amazing control honestly.

The MMM2 is a good esc but my tekin combos smoke em in my race truggies. Pure quality!!!

Re: motor and esc for a xl kit
 

how fast will it be on 4 s packs tekin set up?

Re: motor and esc for a xl kit
 

Hey Vito are you getting the kit and are you from the HPI Baja forum I thought the name was familiar."thumbsup"

Re: motor and esc for a xl kit
 

yes its me same one I got the kit on order at the lhs mom helping with it pay it off

Re: motor and esc for a xl kit
 

Nice after I sell my yeti I will be ordering the kit as well I think it may suffice my largescale addiction but we will see.I would also like to build panels for it too.

Re: motor and esc for a xl kit
 

think some one will come out with a new esc and motor just for this kit?

Re: motor and esc for a xl kit
 

Don't understand why they would. There are already lots of options available.

Re: motor and esc for a xl kit
 

what kv to go with?

Re: motor and esc for a xl kit
 

Ok so this kit is on my Radar. I have a tekin rx8 and a t8 1900 will this work well for the xl?


Sent from my iPhone using Tapatalk

Re: motor and esc for a xl kit
 

will the motor from the traxxas xo1 road car fit in the truck

Re: motor and esc for a xl kit
 

I doubt it the XO-1 motor will fit it's a castle 1717 so the can diameter will be to big to snuggle up with the trans. Unless someone makes a different motor/trans mount so you can mount a bigger motor. I don't think the drive line could handle that power either it would become a vicious cycle of either upgrading/replacing parts. Just my $.02"thumbsup"