Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial Yeti XL
Loading

Notices

Thread: Upgrades!!!

Reply
 
LinkBack Thread Tools Display Modes
Old 06-05-2017, 10:55 PM   #1
Newbie
 
Join Date: Jan 2017
Location: Rohnert Park
Posts: 16
Default Upgrades!!!

Hello All,
It's that time when I get to buy some upgrades.(well my wife is telling me I can) I am already going to get the Dhawk, steering and front diff housing. My question is how do people like the Hot Racing stuff: Aluminum AR60 Rear Axle Truss, Rear Chassis Lower Link, Aluminum Rear Chassis Upper Link?
Its pretty much stock other then the rear diff shield, as well as putting a bolt in my rear drive shaft. Ooo I also run 4s for right now, not sure if I will put 6s, as my 4 year old runs it with me.
Thank you and have a great day.
talento is offline   Reply With Quote
Sponsored Links
Old 06-06-2017, 04:19 AM   #2
Rock Stacker
 
Join Date: May 2017
Location: Camden
Posts: 60
Default Re: Upgrades!!!

Quote:
Originally Posted by talento View Post
Hello All,

It's that time when I get to buy some upgrades.(well my wife is telling me I can) I am already going to get the Dhawk, steering and front diff housing. My question is how do people like the Hot Racing stuff: Aluminum AR60 Rear Axle Truss, Rear Chassis Lower Link, Aluminum Rear Chassis Upper Link?

Its pretty much stock other then the rear diff shield, as well as putting a bolt in my rear drive shaft. Ooo I also run 4s for right now, not sure if I will put 6s, as my 4 year old runs it with me.

Thank you and have a great day.


I mean I recently purchased hot racing items! So far so good and I run in 6s! From what I've read and researched dhawk items are good as well! I'll be trying some of their stuff soon too


Sent from my iPhone using Tapatalk
Jeo-15 is offline   Reply With Quote
Old 06-06-2017, 04:25 AM   #3
Rock Stacker
 
Join Date: May 2017
Location: Camden
Posts: 60
Default Re: Upgrades!!!

Quote:
Originally Posted by talento View Post
Hello All,

It's that time when I get to buy some upgrades.(well my wife is telling me I can) I am already going to get the Dhawk, steering and front diff housing. My question is how do people like the Hot Racing stuff: Aluminum AR60 Rear Axle Truss, Rear Chassis Lower Link, Aluminum Rear Chassis Upper Link?

Its pretty much stock other then the rear diff shield, as well as putting a bolt in my rear drive shaft. Ooo I also run 4s for right now, not sure if I will put 6s, as my 4 year old runs it with me.

Thank you and have a great day.


I mean I recently purchased hot racing items! So far so good and I run in 6s! From what I've read and researched dhawk items are good as well! I'll be trying some of their stuff soon too


Sent from my iPhone using Tapatalk
Jeo-15 is offline   Reply With Quote
Old 06-06-2017, 09:40 AM   #4
Newbie
 
Join Date: Sep 2016
Location: Berkeley
Posts: 6
Default Re: Upgrades!!!

Hot Racing is great but due to only being black, too much and you've basically recreated everyone's same Hot Racing setup. To add some custom colorization I like GPM parts and even Team Raffee at Atees.

Sent from my SAMSUNG-SM-G935A using Tapatalk
PeaCue is offline   Reply With Quote
Old 06-06-2017, 12:52 PM   #5
Newbie
 
Join Date: Jan 2017
Location: Rohnert Park
Posts: 16
Default Re: Upgrades!!!

Thank you, for all the response. The color doesn't matter to me honestly, and I rather have black then anything as that goes with any paint color, in my opinion.
talento is offline   Reply With Quote
Old 06-07-2017, 12:07 AM   #6
Rock Crawler
 
Join Date: Nov 2007
Location: Bay Area (RWC)
Posts: 536
Default Re: Upgrades!!!

I really liked the front lower bulkhead in Aluminum. I kept bending the stock skid plate on hard hits. I bought the Dhawk bulkhead and its been great. The HR one looks good too, plus I think the HR eliminates the skid plate. This solved bending skid plates.



Another thing I like the the Dhawk Shock Caps. No more leaks.



The other thing I noticed a nice improvement on was the Dhawk Shock Tower. My stock plastic one never broke, but I did notice how soft and bendy it was. The Dhawk version has the shock spacers built into it, vers the HR one provides the spacer separate. I did notice my steering improved and seemed sharper.



If you haven't broken an A-Arm, then great. I broke a few before the RPM arms came out. So I bought the Aluminum arms from Dhawk. I would normally stay away from aluminum arms plus I thought, if these bend I will buy the RPM one. But very surprisingly, I haven't bent them yet and I have beat on them plenty.



The HR serrated nut kit is great because. It adds 5mm of width and I noticed less roll overs. Plus they are far better then the stock setup. They support the wheel and the nuts dig into the wheel better.



I have recently bought a bunch of rear axle HR stuff and all of it looks well made. So you have options.

Last edited by MaxxPain; 06-07-2017 at 12:09 AM.
MaxxPain is offline   Reply With Quote
Old 06-07-2017, 04:23 PM   #7
Newbie
 
Join Date: Jan 2017
Location: Rohnert Park
Posts: 16
Default Re: Upgrades!!!

Thank you MaxxPain, I was looking st the stock tower as well. Nothing has broken on it as of yet but to be honest I have not gone to the track near by. I am a stay at home dad of 2 boys so they keep me in my toes, once one goes to pre school then I plan to run a little more.
Right now I am looking at stock towers, front diff, new springs(not sure which ones yet) some rear axle goodies too.

Sent from my LG-H918 using Tapatalk
talento is offline   Reply With Quote
Old 06-08-2017, 07:13 PM   #8
Rock Stacker
 
Join Date: May 2017
Location: Camden
Posts: 60
Default Re: Upgrades!!!

Hey guys how's it going? I'm looking to get aluminum tie rods for my yeti xl! Are the upper links and lower links by gpm the same links? I'm only finding upper links for the car but not the lower...can anyone give me info?


Sent from my iPhone using Tapatalk
Jeo-15 is offline   Reply With Quote
Old 06-08-2017, 09:57 PM   #9
Quarry Creeper
 
Join Date: Dec 2016
Location: Orange County
Posts: 311
Default Re: Upgrades!!!

[QUOTE=Jeo-15;5716800]Hey guys how's it going? I'm looking to get aluminum tie rods for my yeti xl! Are the upper links and lower links by gpm the same links? I'm only finding upper links for the car but not the lower...can anyone give me info?


The upper and lower links on the rtr are the same size plastic, on the kit upper is 5x75 mm and the lower is 4x80 mm steel turnbuckles. GPM is probably one size fits all, adjustable. Hopefully someone who has them will let you know. Personally I think aluminum is not a good idea for tie rods. Both my YXL's have steel turnbuckles and have had no issues.
Cheez is offline   Reply With Quote
Old 06-08-2017, 10:13 PM   #10
Rock Stacker
 
Join Date: May 2017
Location: Camden
Posts: 60
Default Re: Upgrades!!!

[QUOTE=Cheez;5716848]
Quote:
Originally Posted by Jeo-15 View Post
Hey guys how's it going? I'm looking to get aluminum tie rods for my yeti xl! Are the upper links and lower links by gpm the same links? I'm only finding upper links for the car but not the lower...can anyone give me info?





The upper and lower links on the rtr are the same size plastic, on the kit upper is 5x75 mm and the lower is 4x80 mm steel turnbuckles. GPM is probably one size fits all, adjustable. Hopefully someone who has them will let you know. Personally I think aluminum is not a good idea for tie rods. Both my YXL's have steel turnbuckles and have had no issues.


Thanks for reply!!! Where did you get your tie rods from bro? I've been looking all day for tie rods


Sent from my iPhone using Tapatalk
Jeo-15 is offline   Reply With Quote
Old 06-09-2017, 01:07 AM   #11
Pebble Pounder
 
Join Date: Apr 2017
Location: Fresno
Posts: 106
Default Re: Upgrades!!!

awesome! my 3 yo drives with me too

upgraded steering bellcrank is a must. Dhawk is better IMO that HR for this part specifically.

Motor mount, i dont trust plastic with this size motor.

1M weight diff oil in the rear was a MASSIVE upgrade.
Beadlock wheels, I kept degluing tires .....

a real servo. I run a Savox 1270tg but something 400oz of torque or better
Adidas4275 is offline   Reply With Quote
Old 06-09-2017, 03:43 AM   #12
Rock Stacker
 
Join Date: May 2017
Location: Camden
Posts: 60
Default Re: Upgrades!!!

Quote:
Originally Posted by Adidas4275 View Post
awesome! my 3 yo drives with me too

upgraded steering bellcrank is a must. Dhawk is better IMO that HR for this part specifically.

Motor mount, i dont trust plastic with this size motor.

1M weight diff oil in the rear was a MASSIVE upgrade.
Beadlock wheels, I kept degluing tires .....

a real servo. I run a Savox 1270tg but something 400oz of torque or better


Nice! I actually ended up getting the HR bell crank I got a good deal on it! I'm actually looking into a 500oz servo & a motor mount for my mamba xl motor! The motor is like a soda can sheesh! I also HAVE to find aluminum tie rods its way to much play in these plastic ones



Sent from my iPhone using Tapatalk
Jeo-15 is offline   Reply With Quote
Old 06-09-2017, 08:09 AM   #13
Quarry Creeper
 
Join Date: Dec 2016
Location: Orange County
Posts: 311
Default Re: Upgrades!!!

[QUOTE=Jeo-15;5716853]
Quote:
Originally Posted by Cheez View Post



Thanks for reply!!! Where did you get your tie rods from bro? I've been looking all day for tie rods


Sent from my iPhone using Tapatalk
Tower hobbies
AX31257, AX31256
CNC machined polished steel construction
Cheez is offline   Reply With Quote
Old 06-09-2017, 08:12 AM   #14
Rock Stacker
 
Join Date: May 2017
Location: Camden
Posts: 60
Default Re: Upgrades!!!

[QUOTE=Cheez;5716944]
Quote:
Originally Posted by Jeo-15 View Post



Tower hobbies

AX31257, AX31256

CNC machined polished steel construction


Thanks bro appreciate it


Sent from my iPhone using Tapatalk
Jeo-15 is offline   Reply With Quote
Old 06-09-2017, 08:46 AM   #15
Rock Stacker
 
Join Date: May 2017
Location: Camden
Posts: 60
Default Re: Upgrades!!!

[QUOTE=Jeo-15;5716945]
Quote:
Originally Posted by Cheez View Post



Thanks bro appreciate it


Sent from my iPhone using Tapatalk


I actually purchased steel turn buckels with aluminum ends


Sent from my iPhone using Tapatalk
Jeo-15 is offline   Reply With Quote
Old 06-10-2017, 06:27 AM   #16
Quarry Creeper
 
Join Date: Jan 2015
Location: Bucharest, Romania
Posts: 372
Default Re: Upgrades!!!

I bought my stuff directly from their official site, gpmracing.com.hk They have 15% off

Sent from my Xperia Z5 using Tapatalk
Tzicul is offline   Reply With Quote
Old 06-10-2017, 08:15 AM   #17
Rock Stacker
 
Join Date: May 2017
Location: Camden
Posts: 60
Default Re: Upgrades!!!

Quote:
Originally Posted by Tzicul View Post
I bought my stuff directly from their official site, gpmracing.com.hk They have 15% off

Sent from my Xperia Z5 using Tapatalk


Nice! How long did it take to ship? Shipping seems like a long time


Sent from my iPhone using Tapatalk
Jeo-15 is offline   Reply With Quote
Old 06-10-2017, 09:26 AM   #18
Quarry Creeper
 
Join Date: Jan 2015
Location: Bucharest, Romania
Posts: 372
Default Re: Upgrades!!!

Less than two weeks to Romania, which is extremely fast from China to Europe

Sent from my Xperia Z5 using Tapatalk
Tzicul is offline   Reply With Quote
Old 06-10-2017, 09:38 AM   #19
Rock Stacker
 
Join Date: May 2017
Location: Camden
Posts: 60
Default Re: Upgrades!!!

Quote:
Originally Posted by Tzicul View Post
Less than two weeks to Romania, which is extremely fast from China to Europe

Sent from my Xperia Z5 using Tapatalk


That's not bad at all!! I'm looking into also getting a better servo this stock servo isn't that strong


Sent from my iPhone using Tapatalk
Jeo-15 is offline   Reply With Quote
Old 06-10-2017, 09:40 AM   #20
Quarry Creeper
 
Join Date: Jan 2015
Location: Bucharest, Romania
Posts: 372
Default Re: Upgrades!!!

I'm using a Savox 1270, pretty strong at 7.4V

Sent from my Xperia Z5 using Tapatalk
Tzicul is offline   Reply With Quote
Reply



Upgrades!!! - Similar Threads
Thread Thread Starter Forum Replies Last Post
First upgrades camaro_iroc87 Axial SCX10 II 7 10-08-2016 08:18 AM
Upgrades? Krawln68 Axial SCX-10 1 10-07-2010 10:42 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 08:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com